Search results for "coating"
showing 10 items of 2834 documents
Surfactant-Mediated Morphology and Photocatalytic Activity of α‑Ag2WO4 Material
2018
In the present work, the morphology (hexagonal rod-like vs cuboid-like) of an α-Ag2WO4 solid-state material is manipulated by a simple controlled-precipitation method, with and without the presence of the anionic surfactant sodium dodecyl sulfate (SDS), respectively, over short reaction times. Characterization techniques, such as X-ray diffraction analysis, Rietveld refinement analysis, Fourier-transform (FT) infrared spectroscopy, FT Raman spectroscopy, UV–vis spectroscopy, transmission electron microscopy (TEM), high-resolution TEM, selected area electron diffraction, energy-dispersive X-ray spectroscopy, field emission-scanning electron microscopy (FE-SEM), and photoluminescence emission…
Microscratch testing method for systematic evaluation of the adhesion of atomic layer deposited thin films on silicon
2016
The scratch test method is widely used for adhesion evaluation of thin films and coatings. Usual critical load criteria designed for scratch testing of coatings were not applicable to thin atomic layer deposition (ALD) films on silicon wafers. Thus, the bases for critical load evaluation were established and the critical loads suitable for ALD coating adhesion evaluation on silicon wafers were determined in this paper as LCSi1, LCSi2, LCALD1, and LCALD2, representing the failure points of the silicon substrate and the coating delamination points of the ALD coating. The adhesion performance of the ALD Al2O3, TiO2, TiN, and TaCN+Ru coatings with a thickness range between 20 and 600 nm and dep…
Biocompatibility and Antibacterial Properties of ZnO-Incorporated Anodic Oxide Coatings on TiZrNb Alloy
2020
In a present paper, we demonstrate novel approach to form ceramic coatings with incorporated ZnO nanoparticles (NPs) on low modulus TiZrNb alloy with enhanced biocompatibility and antibacterial parameters. Plasma Electrolytic Oxidation (PEO) was used to integrate ZnO nanoparticles (average size 12&ndash
Incorporation mechanism of colloidal TiO2 nanoparticles and their effect on properties of coatings grown on 7075 Al alloy from silicate-based solutio…
2021
Plasma electrolytic oxidation (PEO) was applied using a pulsed unipolar waveform to produce Al2O3-TiO2 composite coatings from sol electrolytic solutions containing colloidal TiO2 nanoparticles. The sol solutions were produced by dissolving 1, 3, and 5 g/L of potassium titanyl oxalate (PTO) in a silicate solution. Scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, and Raman spectroscopy were applied to characterizing the coatings. Corrosion behavior of the coatings was investigated using polarization and impedance techniques. The results indicated that TiO2 enters the coating through all types of micro-discharging and is doped into the alumina phase. The higher…
Effect of Molybdate on Corrosion Performance of Oxide Coating Produced on 7075 Al Alloy Using PEO
2022
In this research, plasma electrolytic oxidation (PEO) coatings were prepared on 7075 Al alloy in a silicate-based solution with Na2MoO4 additive using a unipolar waveform at constant current density. The coatings displayed micro-pores, micro-cracks, pancake-like and crater-like features, and also solidified molten oxide particles on the surface. The coatings were majorly composed of Al2O3 (γ, δ, and α), SiO2 (amorphous), and MoO3 phases, which confirms the incorporation of molybdenum in the case of additive-containing coatings. Molybdenum species were transported through cracks, channels, and micropores, as the ready access pathways into the coating and partly sealed the c…
Aluminum tri-isopropoxide as an alternative precursor for atomic layer deposition of aluminum oxide thin films
2019
Due to the safety challenges associated with the use of trimethylaluminum as a metal precursor for the deposition of alumina, different chemicals have been investigated over the years to replace it. The authors have investigated the use of aluminum tri-isopropoxide (TIPA) as an alternative alkoxide precursor for the safe and cost-effective deposition of alumina. In this work, TIPA is used as a stable Al source for atomic layer deposition (ALD) of Al2O3 when different oxidizing agents including water, oxygen plasma, water plasma, and ozone are employed. The authors have explored the deposition of Al2O3 using TIPA in ALD systems operating in vacuum and atmospheric pressure conditions. For the…
Toward Sustainable PLA-Based Multilayer Complexes with Improved Barrier Properties
2019
Poly(lactic acid) or PLA is currently considered as one of the most promising substitutes of conventional plastics, with low environmental impact, especially for food packaging applications. Nevertheless, some drawbacks, such as high permeability to oxygen, are still limiting its industrial applications. The objective of this study was to highly increase the oxygen barrier performance of PLA without compromising its sustainable nature and following the principles of circular economy perspective. Coproducts coming from mill industries, such as wheat gluten proteins (WG), were used to produce PLA-WG-PLA multilayer complexes with improved barrier performance. Different technologies of industri…
Application of polydopamine functionalized zinc oxide for glucose biosensor design
2021
Zinc oxide (ZnO) nanostructures are widely used in optical sensors and biosensors. Functionalization of these nanostructures with polymers enables optical properties of ZnO to be tailored. Polydopamine (PDA) is a highly biocompatible polymer, which can be used as a versatile coating suitable for application in sensor and biosensor design. In this research, we have grown ZnO-based nanorods on the surface of ITO-modified glass-plated optically transparent electrodes (glass/ITO). Then the deposition of the PDA polymer layer on the surface of ZnO nanorods was performed from an aqueous PDA solution in such a way glass/ITO/ZnO-PDA structure was formed. The ZnO-PDA composite was characterized by S…
A supported titanium postmetallocene catalyst: Effect of selected conditions on ethylene polymerization
2011
Ethylene polymerization with a titanium complex [N,N-ethylenebis(3-methoxysalicylideneiminato)titanium dichloride] immobilized on the magnesium support with the formula MgCl2(THF)0.32(Et2AlCl)0.36 was studied. In particular, the effects of polymerization temperature, monomer pressure, and polymerization time on the activity of the catalyst and on the polyethylene properties (molecular weight and its distribution, melting point, crystallinity, and bulk density) were evaluated. The findings of investigations prove that the studied supported titanium catalyst is highly active in ethylene polymerization, and its activity increases with increasing temperature and monomer pressure. Moreover, stab…
Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests
2011
Polyethylene grafted with itaconic acid was subjected to weathering under laboratory accelerated conditions. The course of the photo-oxidative degradation process of that material was studied by FTIR spectroscopy both through quantitative measurements of changes in absorbance values at selected wave numbers and through measurements of surface area values for absorption bands which were separated by means of deconvolution. The use of both those procedures of quantitative determinations resulted in a general conclusion that the oxidation process was initiated from the very first moment of irradiation, and it produced ketones, acids, esters (intramolecular and of acetate type), peracids, peres…