Search results for "compatibilization"
showing 10 items of 59 documents
Effect of compatibilization on the photo-oxidation behaviour of polyethylene/polyamide 6 blends and their nanocomposites
2015
Abstract Polymer based nanocomposites are increasingly attracting interest from academia and industry, and the use of polymer blends as matrices greatly increase their potential field of application. In order to improve their characteristics, the use of compatibilizers acting on the blend components is mandatory. However, this also leads to rising concerns regarding the behaviour of polymer blend based nanocomposites upon being subjected to photo-oxidative degradation. It is known that morphology can deeply influence the photo-oxidative behaviour, and this can be therefore deeply influenced by the blend components and by the use of compatibilizers. In this work, polymer blend nanocomposites…
Compatibilization of blends of polyethylene with a semirigid liquid crystalline polymer by PE-g-LCP copolymers
1997
The blends of thermoplastics with liquid crystalline polymers show, in general, poor properties because of the lack of adherence between the two phases. The use of ad hoc synthesized copolymers containing the monomer units of the two polymers has been recently considered by some of us for blend compatibilization, and the results appear promising. In this work, new PE-g-LCP copolymers, prepared either by the synthesis of the LCP in the presence of a functionalized PE, or by reactive blending of the latter polymer with preformed LCP, have been employed as compatibilizing additives for blends of PE with a semirigid LCP. The morphology and the rheological and mechanical properties of the ternar…
Diene/polar monomer copolymers, compatibilisers for polar/non-polar polymer blends. A controlled block copolymerisation with a single-site component …
2002
A well-controlled two-step process, the polymerisation of isoprene or isoprene/hex-1-ene copolymerisation followed by e-caprolactone polymerisation, affords trans-polyisoprene or (trans-polyisoprene/hex-1-ene copolymer)–poly(e-caprolactone) diblocks of various lengths. The single component initiator is an allylsamarocene compound. An atomic force microscopy study shows that these copolymers are efficient compatibilisers for poly(e-caprolactone) and polyisoprene blends. Poly(e-caprolactone) chain growth from Sm–polyisoprene chain.
Micromechanics of “raspberry” morphology in PPE/SAN polymer blends compatibilized with linear ABC triblock terpolymers
2015
Abstract The effect of compatibilization with a symmetrical polystyrene- block -polybutadiene- block -poly(methyl methacrylate) (SBM) triblock terpolymer on the morphological and mechanical properties (specifically toughness) of immiscible poly(2,6-dimethyl-1,4-phenylene ether)/poly(styrene- co -acrylonitrile) (PPE/SAN) blends with different blend (w/w) ratios is investigated. We study the effect of blend viscosity on the localization of the compatibilizer at the blend interface, influencing the mechanical properties of the macroscopic material. The impact of the specific morphology of the blends, known as “raspberry morphology”, on the final material will be explained using thermomechanica…
Synthesis of PP-LCP graft copolymers and their compatibilizing activity for PP/LCP blends
1998
The aim of this work was the synthesis of new graft copolymers consisting of polypropylene (PP) backbones and liquid crystalline polymer (LCP) branches, to be used as compatibilizing agents for PP/LCP blends. The PP-g-LCP copolymers have been prepared by polycondensation of the monomers of a semiflexible liquid crystalline polyester (SBH 1 : 1 : 2), that is, sebacic acid (S), 4,4′-dihydroxybiphenyl (B), and 4-hydroxybenzoic acid (H) in the mole ratio of 1 : 1 : 2, carried out in the presence of appropriate amounts of a commercial acrylic-acid-functionalized polypropylene (PPAA). The polycondensation products, referred to as COPP50 and COPP70, having a calculated PPAA concentration of 50 and…
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier
2008
Abstract Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized using an already investigated method and a sample of Cloisite 15A, a montmorillonite modified with ammonium quaternary salts was added. The blends were prepared in a twin screw extruder and characterized from a morphological, rheological and mechanical point of view. The results indicated that, despite a good morphology achieved in the filled blends and a moderate intercalation of the clay, the mechanical properties are far from being good, especially the ultimate properties. In order to investigate the possible influence of the inhibition of the crystallization and of the degradation of the organi…
Use of PP-g-OXA in the Compatibilization of PP/LCP Blends
1999
Abstract Adding small amounts of liquid crystalline polymers (LCP) to flexible thermoplastic matrices (FTP) allows to enhance the mechanical and thermomechanical properties. Therefore it is possible to obtain materials with new properties only by simple mixing. A strong shortcoming is the incompatibility between LCP and FTP that leads to materials with very poor properties unusable for commercial pourposes. The presence of a compatibilizer is therefore required. Oxazoline functionality is known to be highly reactive toward many other functional groups and then oxazoline functionalized polymers can be efficiently used as compatibilizer precursors. In this work the compatibilizazion of polypr…
Morphology and Rheology of HDPE/LCP Blends Compatibilized by a Novel PE-g-LCP Copolymer
1999
A novel graft copolymer (PE-g-LCP) consisting of polyethylene (PE) backbones and liquid crystalline polymer (LCP) branches was synthesized via reactive blending of an acrylic acid-functionalized PE (Escor 5000 by Exxon) with a semiflexible LCP (SBH 1 : 1 : 2 by Eniricerche S.p.A.). The crude reactive blending product (COP) was shown by investigation of the fractions soluble in boiling toluene and xylene and of the residue to contain unreacted Escor and SBH, together with the graft copolymer forming the interphase. The compatibilizing activity of COP for PE/SBH blends, compared to that of pure Escor, was investigated using two PE grades. The COP addition into 80/20 PE/SBH blends caused a muc…
Oxazoline-containing compatibilizers for polyamide/SAN and polyamide/ABS blends
2002
Polyamide (PA) and acrylonitrile/butadiene/styrene copolymer (ABS) may appear as a mixture in the recycled plastic stream. The incompatibility of these blends results in a blend with poor mechanical properties. The aim of this work is to partially convert the nitrile groups of the acrylonitrile/styrene copolymer (SAN) into oxazoline groups by reaction with aminoethanol (AE). Such modified SAN (SAN-m) can react with the amine or carboxylic acid end groups of PA, and therefore used as compatibilizers for blends of PA with ABS. SAN-m was found to reduce the SAN-domain size in the PA/SAN-blends. The initial acrylonitrile content of SAN-m had a strong influence on the degree of conversion into o…
Morphology and properties of compatibilized PP/PET melt spun fibers
2017
This work provides a study on the influence of a rubbery compatibilizer on the morphology and on the physical properties of polypropylene (PP)/polyethylenetherephthalate(PET) melt spun fibers at different hot draw ratios. In particular, a sample of SEBS copolymer grafted with maleic anhydride was used as compatibilizer. Both the uncompatibilized PP/PET blend and the compatibilized one were prepared by melt compounding in a counter-rotating twin-screw extruder. The materials have been characterized from a rheological, morphological and mechanical point of view. The addition of the compatibilizer increased the viscosity in shear flow of the uncompatibilized blend, and significantly improved t…