Search results for "compatibilization"
showing 10 items of 59 documents
Synthesis of AB and ABA block copolymers as compatibilizers in nylon 6/polycarbonate blends
1996
Nylon 6 (Ny6) and Bisphenol A polycarbonate (PC) are immiscible and form biphasic blends. To improve the compatibility of Ny6 and PC several ABA and AB Ny6/PC block copolymers were synthesized, and their compatibilizing behavior on the blends were tested. Block copolymers were prepared by reacting monoamino- or diamino-terminated Ny6 homopolymers with high molecular weight PC at 130°C in anhydrous DMSO. The reaction of diamino- and monoamino-terminated Ny6 with polycarbonate produces block copolymers of the type PC-Ny6-PC (ABA) and PC-Ny6 (AB), respectively, plus a certain amount of unconverted PC degradated to lower molecular weights. To separate the block copolymer from the unconverted PC…
Filmability and properties of compatibilized PA6/LDPE blends
2005
Blends of low density polyethylene (LDPE) and polyamide 6 (PA6), compatibilized with an ethylene-acrylic acid copolymer (EAA), either alone or combined with a low molar mass bis-oxazoline compound (PBO), have been processed in film blowing operations and the properties of the films have been investigated. Without of compatibilization, the filmability of the blend was very poor and no significant specimen was collected. As a result of the reactive compatibilization, the blends with EAA and even more with the EAA-PBO, were processed successfully in film blowing. The films of the quaternary blends were shown to possess satisfactory mechanical properties as a result of fine and stable morpholog…
Inducing mixing of water-in water BSA/dextran emulsion by a strong polyelectrolyte
2015
Abstract We examine whether a small amount of strong polyelectrolyte (dextran sulfate sodium salt/DSS/) can induce mixing in water-in-water bovine serum albumin/dextran (BSA/DEX) emulsion and how intermacromolecular interactions affect its the rheological properties. Addition of DSS to water-in-water emulsion at pH 5.4 leads to its mixing at the DSS/BSA weight ratio, ( q ( DSS / BSA ) ) ≥ 0.07 , a noticeable increase in viscosity and storage modulus (G′). Mixing is reversible: increasing the ionic strength leads to phase separation in the water/BSA/DEX/DSS system. The increase in viscoelasticity results from the interaction of DSS with both macromolecular compounds of the emulsion. We assum…
“Compatibilization” through Elongational Flow Processing of LDPE/PA6 Blends
2018
Polyamide/polyolefin blends have gained attention from the academia and the industry for several years. However, in order to optimize their properties, some drawbacks such as chemical incompatibility must be adequately overcome. This can be done by adding suitable compatibilizers. On the other hand, it is less known that suitable processing techniques may also lead to significant results. In a previous work on a low-density polyethylene/polyamide 6 (LDPE/PA6) blend, we found that the orientation due to elongational flow processing conditions could lead to an unexpected brittle&ndash
Effect of a Compatibilizer on the Morphology and Properties of Polypropylene/Polyethylentherephthalate Spun Fibers
2017
Fibers spun by melt spinning of binary and ternary polypropylene/ polyethylenetherephthalate blends have been produced and characterized in order to investigate the effect of a compatibilizer on their morphology and mechanical properties. The compatibilizer was a maleic anhydride-functionalized rubber copolymer. The effect of the compatibilizer was well evident in the isotropic state, as the morphology became very fine, the size of the dispersed particles was very small, and the adhesion was better. The effect of the compatibilizer on the mechanical properties is very relevant, especially in the elongation at break. On the contrary, no relevant effect was observed in the anisotropic oriente…
Compatibilized Polyamide 6/Polyethylene Blends Clay Nanocomposites: Effect of the Degradation and Stabilization of the Clay Modifier
2008
Abstract Blends of polyamide 6 (PA6) and high-density polyethylene (HDPE) were compatibilized using an already investigated method and a sample of Cloisite 15A, a montmorillonite modified with ammonium quaternary salts was added. The blends were prepared in a twin screw extruder and characterized from a morphological, rheological and mechanical point of view. The results indicated that, despite a good morphology achieved in the filled blends and a moderate intercalation of the clay, the mechanical properties are far from being good, especially the ultimate properties. In order to investigate the possible influence of the inhibition of the crystallization and of the degradation of the organi…
Blends of nylon 6 with a polyethylene functionalized by photooxidation
1990
An easy and cheap method to prepare functionalized polyethylene is reported in which polyethylene is photooxidized and then melt-blended with nylon. Structural, rheological, and mechanical modifications indicate that carbonyl, formed during photooxidation, and amine groups react giving rise to copolymers which stabilize the blends. Photooxidized polyethylene from waste could be very effective in preparing polyethylene/polyamide blends with improved properties. This new approach improves over current methods in which compatibilization of polyolefines and polyamides is mostly performed by reacting functionalized polyolefines with polyamides in molten state. The functionalization is achieved b…
Diene/polar monomer copolymers, compatibilisers for polar/non-polar polymer blends. A controlled block copolymerisation with a single-site component …
2002
A well-controlled two-step process, the polymerisation of isoprene or isoprene/hex-1-ene copolymerisation followed by e-caprolactone polymerisation, affords trans-polyisoprene or (trans-polyisoprene/hex-1-ene copolymer)–poly(e-caprolactone) diblocks of various lengths. The single component initiator is an allylsamarocene compound. An atomic force microscopy study shows that these copolymers are efficient compatibilisers for poly(e-caprolactone) and polyisoprene blends. Poly(e-caprolactone) chain growth from Sm–polyisoprene chain.
Orientation induced brittle – Ductile transition in a polyethylene/polyamide 6 blend
2014
Abstract Polyamide/polyolefin blends are of scientific and technological interest but, on the other hand, the different chemical nature of the two components makes them incompatible, resulting in unsatisfactory physical properties and making compatibilization necessary. In particular, although the two components are ductile, the binary blends can show brittle behaviour. It is also known that the effect of the elongational flow (and then of the induced orientation) on polymer blends is a decrease of elongation at break with increase of the degree of orientation. In this work, the effect of orientation on the mechanical properties of a low density polyethylene/polyamide 6 incompatible blend w…
Processing – morphology – property relationships of polyamide 6/polyethylene blend–clay nanocomposites
2013
In this work, we studied the effect of the method of preparation and of reprocessing on the morphology and, con- sequently, on the physical properties of polyamide 6 (PA6)/ high density polyethylene (HDPE)-clay nanocomposite blends in the presence of different compatibilizers. In particular, the nanocomposites were obtained by melt mixing using a co- rotating twin screw extruder (E1). The blends thus obtained were re-extruded (E2) under the same operating conditions. Moreover, blends with the same final composition were produced using a masterbatch of the compatibilizer with the clay prepared in a separated stage in a batch mixer (MB). All the materials were characterized by scanning electr…