Search results for "composite"
showing 10 items of 4584 documents
High-resolution electron-beam patternable nanocomposite containing metal nanoparticles for plasmonics
2008
Polymer nanocomposites containing noble metal nanoparticles are promising materials for plasmonic applications. In this paper, we report on a high-resolution negative-tone nanocomposite resist based on poly(vinyl alcohol) where silver nanoparticles and nanopatterns are simultaneously generated by electron-beam lithography. Our results indicate nanostructures with a relatively high concentration of nanoparticles and, consequently, an electromagnetic coupling among the nanoparticles. Therefore, the patternable nanocomposite described in this work may be a suitable material for future plasmonic circuitry.
Functionalised poly (vinyl alcohol)/graphene oxide as polymer composite electrolyte membranes
2019
[EN] Crosslinked poly(vinyl alcohol) (PVA) based composite films were prepared as polyelectrolyte membranes for low temperature direct ethanol fuel cells (DEFC). The membranes were functionalised by means of the addition of graphene oxide (GO) and sulfonated graphene oxide (SGO) and crosslinked with sulfosuccinic acid (SSA). The chemical structure was corroborated and suitable thermal properties were found. Although the addition of GO and SGO slightly decreased the proton conductivity of the membranes, a significant reduction of the ethanol solution swelling and crossover was encountered, more relevant for those functionalised with SGO. In general, the composite membranes were stable under …
E-beam crosslinked, biocompatible functional hydrogels incorporating polyaniline nanoparticles
2012
Abstract PANI aqueous nanocolloids in their acid-doped, inherently conductive form were synthesised by means of suitable water soluble polymers used as stabilisers. In particular, poly(vinyl alcohol) (PVA) or chitosan (CT) was used to stabilise PANI nanoparticles, thus preventing PANI precipitation during synthesis and upon storage. Subsequently, e-beam irradiation of the PANI dispersions has been performed with a 12 MeV Linac accelerator. PVA-PANI nanocolloid has been transformed into a PVA-PANI hydrogel nanocomposite by radiation induced crosslinking of PVA. CT-PANI nanoparticles dispersion, in turn, was added to PVA to obtain wall-to-wall gels, as chitosan mainly undergoes chain scission…
Experiments on the Virtual City: Three-Dimensional Reconfigurations of Missing, Never Realized or Destroyed Urban Areas
2011
We present two works on the "Virtual City" held at Palermo. They are about the three-dimensional reconfiguration of urban places that show evidence of "invisible" architecture, this is because in one case there were ancient monuments now destroyed, or in another case projects designed for the urban void and never made. The aim is to involve new forms of communication for the development of cultural tourism.
Extensional flow of HDPE/LDPE blends
1982
Elongational viscosity data, obtained through the converging flow analysis by Cogswell, are presented for two types of HDPE/LDPE blends at various compositions and different temperatures. The results relative to the homopolymer parents compare favourably with literature data obtained also with different and more sophisticated techniques. Those relative to blends show peculiar features for the two cases: when the newtonian viscosity of the LDPE is higher all the blends show a behaviour typical of the LDPE with a maximum in η el /η0 enhanced at small percentage of HDPE; when the newtonian viscosity of the LDPE is similar to that of the HDPE there is only a gradual change in the properties.
Effect of TiO2 on the mullite formation and mechanical properties of alumina porcelain
2010
Abstract The effect of adding TiO 2 to standard alumina porcelain on its microstructure and flexural strength was investigated. A series of alumina porcelain bodies containing increasing amounts of TiO 2 were prepared by extruding mixtures of raw materials and TiO 2 . Porcelain rods were fired under industrial scheduling in a manufacturing kiln. The overall degree of crystalline and amorphous phase content within the porcelain bodies was quantitatively determined using a Rietveld analysis. Results indicated a higher amount of mullite formation in porcelain bodies containing TiO 2 . Examination of the product materials using field emission scanning electron microscopy showed a high density o…
Effects of a structured educational intervention in moderate-to-severe elderly asthmatic subjects.
2019
Background: Adherence to inhaled drugs is linked to patients’ satisfaction with their device, and an incorrect use can negatively affect the outcomes of asthma treatment. We speculated that this is particularly true in elderly asthmatic subjects. Aim: We performed a national pre-post interventional multicentre study, enrolling moderate-to-severe asthmatic subjects aged ≥65 years treated with fixed inhaled combination drugs by dry powder inhaler (DPI) or pressurized metered dose inhaler (pMDI). Adherence and critical errors were evaluated by means of validated questionnaires at first visit (V1) and after 3–6 months (V2). At V1, subjects underwent intensive training on the correct use of the…
Reliability of PEA Measurement in Presence of an Air Void Defect
2020
This paper deals with the reliability of the Pulsed Electro-Acoustic (PEA) technique in the case of a specimen containing an air layer. The first approach to this study has been proposed by the authors in previously published works. In these papers, the mathematical description, the PEA cell simulation model, and some experimental tests have been reported. In this work, a more accurate description of the acoustic wave behavior within the PEA cell and specimen with and without an air layer is given. Moreover, the comparison between simulation and experimental tests for both cases (specimen with and without air layer) allowed the validation of the previously developed PEA cell simulation mode…
Porous structure of fibre networks formed by a foaming process: a comparative study of different characterization techniques
2016
Recent developments in making fibre materials using the foam-forming technology have raised a need to characterize the porous structure at low material density. In order to find an effective choice among all structure-characterization methods, both two-dimensional and three-dimensional techniques were used to explore the porous structure of foam-formed samples made with two different types of cellulose fibre. These techniques included X-ray microtomography, scanning electron microscopy, light microscopy, direct surface imaging using a CCD camera and mercury intrusion porosimetry. The mean pore radius for a varying type of fibre and for varying foam properties was described similarly by all …
Investigation of Effective Thermal Conductivity Aluminum Foams
2012
Abstract The study on the heat transfer mechanisms through the aluminium foam with a fluid in void cells of that foam was reported in this paper. Based on laboratory experiments, the effective thermal conductivity coefficient values were found for various type aluminum foams which had been filled up with a gas or a liquid. The significant effects were observed from porosity as well as from metal and fluid properties on the heat transfer capacity in a foam-fluid system. The convective heat transfer phenomenon was identified to occur in the foam cellular space. That phenomenon affected the effective thermal conductivity much more for liquid-filled foams than for gas-filled foams.