Search results for "composite"
showing 10 items of 4584 documents
Influence of antioxidants intercalated layered double hydroxides (AO-LDHs) on the thermo-oxidative stability of pla and pe based nanocomposites
2016
Layered double hydroxides (LDHs) are excellent host matrices for storage and delivery of antioxidants (AOs).
Effects of phenolic-like intercalated layered double hydroxides on poly(lactic acid) based nanocomposites
2015
Two phenolic-like antioxidants (AOs), 3-(3,5-di-tert-butyl-4-hydroxyphenyl)-propionate and 6-hydroxy-2,5,7,8-tetrametilcromano-2-carboxylate anions, were intercalated by anion exchange in layered double hydroxides (LDHs). The two AO-LDHs were dispersed by ultrasound-assisted solution mixing in poly(lactic acid) (PLA) and the thermal oxidation stability of the composites was evaluated following the variation of the molecular weight by SEC, after a controlled aging process, and determining the oxidation induction time (OIT) by DSC. The results evidenced that the intercalation of both the AO molecules within the LDH galleries prevent their own thermal and thermo-oxidative degradation as well a…
Resinas compuestas: Revisión de los materiales e indicaciones clínicas
2006
El objetivo de este trabajo es presentar los diferentes componentes de los composites actualmente utilizados en Odontología y aportar al profesional las bases que puedan proporcionarle los criterios a tener en cuenta para seleccionar uno u otro en función de los requerimientos terapéuticos. La mayoría de los composites de uso en Odontología corresponden a materiales híbridos, se denominan así por estar conformados por grupos poliméricos reforzados por una fase inorgánica de vidrio de diferente composición, tamaño y porcentaje de relleno. Los composites fluidos o los condensables han tratado de dar respuesta algunos requerimientos funcionales, aunque sin demasiado éxito en la mejora de sus p…
Asymmetric synthesis of functionalized tetrahydrofluorenones via an NHC-catalyzed homoenolate Michael addition
2018
The first example of an N-heterocyclic carbene-catalyzed asymmetric desymmetrization of enal-tethered cyclohexadienones via an intramolecular homoenolate Michael addition/esterification reaction is described. This new protocol offers a direct entry to various functionalized tetrahydrofluorenones with three contiguous stereocenters in high yields, good diastereoselectivities and excellent enantioselectivities.
Céramiques diélectriques commandables pour applications micro-ondes : composites à base de titanate de baryum-strontium et d'un oxyde non ferroélectr…
2001
Since the last decades, dielectric ceramics have been considered as attractive for microwave applications as tunable dielectric resonators or phase shifters. For that, ceramic devices should be tunable – change in dielectric constant with applied voltage- with moderate to low dielectric constant (30 to 1000) and loss tangent as low as possible. To reconcile these properties, composite ceramics based on Ba0.6Sr0.4TiO3 (BSTO) and a non-ferroelectric oxide with a low dielectric constant (MgTiO3 or MgO) were synthesised. The aim of this study was to correlate the microstructure with the dielectric properties, especially the Curie temperature and the dielectric relaxation phenomena.Ceramics with…
Strengthening of Masonry Columns with BFRCM or with Steel Wires: An Experimental Study
2016
Nowadays, innovative materials are more frequently adopted for strengthening historical constructions and masonry structures. The target of these techniques is to improve the structural efficiency with retrofitting methods while having a reduced aesthetical impact. In particular, the use of basalt fiber together with a cementitious matrix emerges as a new technique. This kind of fiber is obtained by basalt rock without other components, and consequently it could be considered a natural material, compatible with masonry. Another innovative technique for strengthening masonry columns consists of applying steel wires in the correspondence of mortar joints. Both techniques have been recently pr…
Basalt Fiber Hybridization Effects on High-Performance Sisal-Reinforced Biocomposites
2022
The increasing attention given to environmental protection, largely through specific regulations on environmental impact and the recycling of materials, has led to a considerable interest of researchers in biocomposites, materials consisting of bio-based or green polymer matrixes reinforced by natural fibers. Among the various reinforcing natural fibers, sisal fibers are particularly promising for their good mechanical properties, low specific weight and wide availability on the current market. As proven in literature by various authors, the hybridization of biocomposites by synthetical fibers or different natural fibers can lead to an interesting improvement of the mechanical properties or…
Micro- and Nano- polymer based composites for novel generation bio-medical materials
2011
New Polylactic Acid Composites Reinforced with Artichoke Fibers
2015
In this work, artichoke fibers were used for the first time to prepare poly(lactic acid) (PLA)-based biocomposites. In particular, two PLA/artichoke composites with the same fiber loading (10% w/w) were prepared by the film-stacking method: the first one (UNID) reinforced with unidirectional long artichoke fibers, the second one (RANDOM) reinforced by randomly-oriented long artichoke fibers. Both composites were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. The morphology of the fracture surfaces was analyzed through scanning electron microscopy (SEM). Moreover, a theoretical model, i.e., Hill's method, was used to fit the experimental Young's modu…
Performance evaluation of a bio-based composite building material made of natural resin mixed with hay
2016
Recent years have seen an increasing public interest in issues related to energy saving and environmental pollution reduction in the building sector. As a result, many directives have been issued, the most important being the Directive 2010/31/EU (EPBD Recast) on the energy performance of buildings, which requires that “Member States shall ensure that by 31 December 2020 all new buildings are nearly zero-energy buildings”. This goal can be obtained not only by reducing energy demand for heating and cooling, but also, for example, by improving building envelope performances. In this work, a first analysis of the thermal and structural behaviour of a biocomposite material, constituted by a na…