Search results for "composite"
showing 10 items of 4584 documents
A unique microstructure of the fiber networks deposited from foam-fiber suspensions
2015
Abstract Fiber networks can be formed using aqueous foam as the suspending medium. The mean bubble size of the foam affects the resulting pore-size distribution of the fiber network. The foam–fiber interactions cause in particular an increase in the proportion of large micropores of the network, in comparison with the fiber networks that result from traditional water forming at a similar material density. Experiments were carried out for two different types of cellulose fiber, and characterization of the resulting pore structure was based on X-ray microtomography of the resulting fiber networks. The unique pore structure obtained with foam forming was reflected in various macroscopic proper…
Buckling and post-buckling analysis of cracked composite plates via a single-domain Ritz approach
2018
Thin and moderately thick composite multi-layered plates are widely employed in many engineering applications, especially in naval and aerospace structures. These structural components can experience in service the presence of cracks, generated for example by corrosion, fatigue or accidental external causes. Cracks can affect the load carrying capability, buckling and post-buckling behaviour of plates; therefore, their effects need to be investigated and taken into account for fail safe or damage tolerant design. Additionally, attention should be devoted to the interaction of cracks with buckling and post-buckling behaviour, as the energy release rate in post-buckling regimes can be adverse…
A numerical solution that determines the temperature field inside phase change materials: application in buildings
2013
The use of novel building materials that contain active thermal components would be a major advancement in achieving significant heating and cooling energy savings. In the last 40 years, Phase Change Materials or PCMs have been tested as thermal mass components in buildings, and most studies have found that PCMs enhance the building energy performance. The use of PCMs as an energy storage device is due to their relatively high fusion latent heat; during the melting and/or solidification phase, a PCM is capable of storing or releasing a large amount of energy. PCMs in a wall layer store solar energy during the warmer hours of the day and release it during the night, thereby decreasing and sh…
Ultrasonication as a Method of Investigation of the Mechanical Properties of Doped Hafnium Barium Titanate
2012
The purpose of this study was to fabricate dense ceramic specimens from the system of BaTiO3-BaHfO3 and then to perform mechanical tests. The effect of Hf content on a microstructure and mechanical properties of the BaTiO3-BaHfO3 solid solution was investigated at room temperature. To determine the elastic constants (the Young′s modulus E, the shear modulus G, bulk modulus K and the Poisson′s ratio v) of BaHfxTi1-xO3 a method of measurement of the longitudinal (VL ) and transverse (VT ) ultrasonic wave velocities for this type of material was developed.
Effect of two novel bio-based rejuvenators on the performance of 50% RAP mixes - a statistical study on the complex modulus of asphalt binders and as…
2019
An experimental study was conducted to evaluate the effectiveness of two bio-additives as rejuvenators on the properties of asphalt mixtures containing 50% RAP and their binder constituents containing 37% RAP binder. Before mixing, the rejuvenators were blended with fresh bitumen and the extracted and recovered RAP bitumen, and changes in the rheological properties of the binders were assessed using performance grading (PG) criteria. The results showed that both rejuvenators could improve the low-temperature performance of the aged RAP binder and restore its low-temperature properties. Master curves for the unaged, RTFO-aged, and PAV aged blends were constructed using both the Christensen-A…
The effect of human osteoblasts on proliferation and neo-vessel formation of human umbilical vein endothelial cells in a long-term 3D co-culture on p…
2008
Angiogenesis is a key element in early wound healing and is considered important for tissue regeneration and for directing inflammatory cells to the wound site. The improvement of vascularization by implementation of endothelial cells or angiogenic growth factors may represent a key solution for engineering bone constructs of large size. In this study, we describe a long-term culture environment that supports the survival, proliferation, and in vitro vasculogenesis of human umbilical vein endothelial cells (HUVEC). This condition can be achieved in a co-culture model of HUVEC and primary human osteoblasts (hOB) employing polyurethane scaffolds and platelet-rich plasma in a static microenvir…
Preservation of dendritic cell function upon labeling with amino functionalized polymeric nanoparticles.
2010
Dendritic cells (DCs) are key players in eliciting immunity against antigens, therefore making them the focus of many investigations on immune responses in infections, cancer and autoimmune diseases. Nanosized materials have just recently been investigated for their use as carriers of antigens and as labeling agents for DCs. For this later use nanoparticles should be non-toxic and should most importantly not alter the physiological functions of DCs. Here we demonstrate that by the use of polymeric fluorescent nanoparticles as synthesized by the miniemulsion process immature DCs (iDCs) can be efficiently labeled intracellularly. Amino functionalized nanoparticles are more effective than carb…
Tensile behaviour of anti-symmetric CFRP composite
2011
Abstract This paper addresses the response of a 17-ply anti-symmetric carbon/epoxy composite subjected to uniaxial tensile loading. Hashin ply damage model is adopted to describe the damage behaviour of the plies, whereas damage initiation and progression of the interfaces are characterised by mixed-mode cohesive damage model. Force-displacement curves obtained numerically and experimentally show good agreement. Results show that all laminae and interfaces experience the damage except laminae with 0o fibre. In addition, damage is concentrated at the tab and central regions of the tensile specimen. Edge delamination is observed in all interfaces.
Stress Transfer within CNT Fibres: A FEA Approach
2015
Abstract Carbon nanotube (CNT) fibres are characterized by extreme anisotropy in their structure and physical properties. These fibres have been shown to have high axial strength, but poor shear strength between carbon nanotubes; for this reason it is difficult to transfer stress uniformly acrossthe fibre cross section. Here, Finite Element Analysis (FEA) is used to predict the stress distribution and the stress-strain curves of CNT fibres. The resultsdemonstrate that, in accordance with St. Venant principle,very considerable length-to-diameter ratios (> 10 3 ) are required to obtain a uniform stress distribution within the fibres even in the presence of low applied strain.