Search results for "composites"

showing 10 items of 1905 documents

Polyanion–tobramycin nanocomplexes into functional microparticles for the treatment of Pseudomonas aeruginosa infections in cystic fibrosis

2016

Aim: Efficacy of antibiotics in cystic fibrosis (CF) is compromised by the poor penetration through mucus barrier. This work proposes a new ‘nano-into-micro’ approach, used to obtain a combinatorial effect: achieve a sustained delivery of tobramycin and overcome mucus barrier. Methods: Mannitol microparticles (MPs) were loaded with a tobramycin polymeric nanocomplex and characterized in presence of CF artificial mucus. Results & discussion: MPs are able to alter the rheological properties of CF artificial mucus, enhancing drug penetration into it and allowing a prolonged drug release. MPs resulted to be effective in Pseudomonas aeruginosa infections if compared with free tobramycin. Co…

Pseudomonas aeruginosa infectionCystic FibrosisPolymersmedicine.drug_classAntibioticsBiomedical EngineeringMedicine (miscellaneous)Bioengineering02 engineering and technologyDevelopmentBiologySettore BIO/19 - Microbiologia Generalenano into micro strategyCystic fibrosisCell LineNanocompositesMicrobiology03 medical and health sciences0302 clinical medicineAntibiotic resistancePseudomonas aeruginosa InfectionsmedicineTobramycinHumansMannitolPseudomonas InfectionsGeneral Materials ScienceDrug CarriersEpithelial CellsPenetration (firestop)021001 nanoscience & nanotechnologymedicine.diseasePolyelectrolytesMucusAnti-Bacterial AgentsDrug LiberationMucusmicroparticle030228 respiratory systemSettore CHIM/09 - Farmaceutico Tecnologico Applicativocystic fibrosis artificial mucuPseudomonas aeruginosaTobramycinMannitol0210 nano-technologyαβ-poly(N-2-hydroxyethyl)-DL-aspartamidespray dryermedicine.drugNanomedicine
researchProduct

H(II) centers in natural silica under repeated UV laser irradiations

2004

We investigated the kinetics of H(II) centers (=Ge'-H) in natural silica under repeated 266nm UV irradiations performed by a Nd:YAG pulsed laser. UV photons temporarily destroy these paramagnetic defects, their reduction being complete within 250 pulses. After re-irradiation, H(II) centers grow again, and the observed recovery kinetics depends on the irradiation dose; multiple 2000 pulses re-irradiations induce the same post-irradiation kinetics of H(II) centers after each exposure cycle. The analysis of these effects allows us to achieve a deeper understanding of the dynamics of the centers during and after laser irradiation.

Pulsed laserKineticsTWOFOLD COORDINATED SIFOS: Physical sciencesATOMSParamagnetismMaterials ChemistryUv laserIrradiationEXPOSUREQuartzCondensed Matter - Materials ScienceSNChemistryNatural compoundRadiochemistryMaterials Science (cond-mat.mtrl-sci)Disordered Systems and Neural Networks (cond-mat.dis-nn)DEFECTSCondensed Matter - Disordered Systems and Neural NetworksCondensed Matter PhysicsDIFFUSIONElectronic Optical and Magnetic MaterialsWavelengthGE-DOPED SIO2MOLECULAR-HYDROGENGLASSESCeramics and Composites
researchProduct

Metamagnetism in hydrophobically induced carboxylate (phenylmalonate)-bridged copper(II) layers

2006

Self-assembly of copper(II) ions, phenylmalonate and pyrimidine yields the layered compound [Cu(pym)(Phmal)]n ( 1) where intralayer ferro- and interlayer antiferromagnetic interactions occur with three-dimensional antiferromagnetic ordering at Tc = 2.15 K Lloret Pastor, Francisco, Francisco.Lloret@uv.es ; Julve Olcina, Miguel, Miguel.Julve@uv.es

PyrimidineUNESCO::QUÍMICAInorganic chemistrychemistry.chemical_element:QUÍMICA [UNESCO]CatalysisIonMetamagnetism ; Hydrophobically ; Copper ; Three-dimensional antiferromagneticchemistry.chemical_compoundThree-dimensional antiferromagneticMaterials ChemistryAntiferromagnetismCarboxylateMetamagnetismChemistryUNESCO::QUÍMICA::Química analíticaMetals and AlloysGeneral ChemistryHydrophobicallyCopperSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsMetamagnetismCrystallographyCeramics and Composites:QUÍMICA::Química analítica [UNESCO]Copper
researchProduct

Modular Paradigm for Composites: Modeling Hydrothermal Degradation of Glass Fibers

2021

Fiber-reinforced composite materials are often used in structural applications in humid, marine, and offshore environments. Superior mechanical properties are compromised by environmental ageing and hydrolytic degradation. Glass fibers are the most broadly used type of fiber reinforcement to date. However, they are also most severely affected by environmental degradation. The glass fiber degradation rates depend on: (1) glass formulation; (2) environmental factors: pH, T, stress; (3) sizing; (4) matrix polymer; (5) fiber orientation and composite layup. In this short review (communication), seven modules within the Modular Paradigm are reviewed and systematized. These modeling tools, encomp…

QH301-705.5PhysicsQC1-999Chemicals: Manufacture use etc.modular paradigmmodelingTP200-248Textile bleaching dyeing printing etc.compositesBiomaterialsMechanics of Materialsenvironmental ageingTP890-933Ceramics and CompositesBiology (General)Civil and Structural Engineeringglass fibersdegradationFibers
researchProduct

An approach to evaluation of sheet bending force under successive multiaxial stress condition

2009

A new bending under tension test is presented in this paper. This method tries to evaluate bending forces in sheet under successive multiaxial stress condition. This test is carried out in only one step with a pinned cylinder over a material that has been previously deformed to pure shear condition. Due to that, the bending process is made under higher back tension forces than the ones involved in the common methods previously studied in the literature. This entails high pressure values in the sheet-bending tool contact that affects the corresponding friction process. Material is strongly strengthened as a consequence of the deformation practiced in it, and as a result of that, bending forc…

Quantitative Biology::BiomoleculesMaterials sciencebusiness.industryTension (physics)Metals and AlloysBendingStructural engineeringContraflexureIndustrial and Manufacturing EngineeringComputer Science ApplicationsPlastic bendingModeling and SimulationBending stiffnessPure bendingCeramics and CompositesBending momentDeep drawingbusinessJournal of Materials Processing Technology
researchProduct

Dynamics of Phase Transition in 0.4NBT-0.4ST-0.2PT Solid Solution

2012

In this paper we present dielectric spectroscopy results of NBT-(0.6-x)ST-xPT with x = 0.2 solid solution. Dielectric investigations clearly showed a relaxor—normal ferroelectric phase transition at TPT = 419 K and low temperature and low frequency dispersion similar to coexistence of dipolar glass and ferroelectric phase. The mean relaxation time above the phase transition follows Vogel—Fulcher law with following parameters: E A = 0.179 eV, τ 0 = 3.39·10−14 s, T VF = 223 K.

Quantum phase transitionPhase transitionMaterials scienceCondensed matter physicsDielectricCondensed Matter PhysicsFerroelectricityElectronic Optical and Magnetic MaterialsDielectric spectroscopyControl and Systems EngineeringPhase (matter)Materials ChemistryCeramics and CompositesElectrical and Electronic EngineeringDispersion (chemistry)Solid solutionIntegrated Ferroelectrics
researchProduct

Radiation processes in oxygen-deficient silica glasses: Is ODC(I) a precursor of E′-center?

2006

Abstract The accumulation of radiation-induced defects under non-destructive X-ray and destructive cathodoexcitation was studied in pure silica KS-4V glasses possessing an absorption band at 7.6 eV. The correspondence between the existence of this band and the creation of the E′-center by radiation was checked. Detection of induced defects was accomplished by measurement of the luminescence during irradiation, post irradiation afterglow or phosphorescence, induced optical absorption, and thermally stimulated luminescence. In all samples, these observed phenomena associated with charge trapping and recombination on the oxygen-deficient luminescence center. Others centers of luminescence were…

Quenching (fluorescence)Absorption spectroscopyChemistryAnalytical chemistryCondensed Matter PhysicsThermoluminescenceElectronic Optical and Magnetic MaterialsAbsorption bandMaterials ChemistryCeramics and CompositesIrradiationLuminescencePhosphorescenceAbsorption (electromagnetic radiation)Journal of Non-Crystalline Solids
researchProduct

Structure evolution and reaction mechanism in the Ni/Al reactive multilayer nanofoils

2014

Abstract The extremely rapid gasless reactions in binary Ni/Al reactive multilayer nanofoils (RMNFs) are investigated both experimentally and theoretically. The quenching technique is used to study the dynamics of structural transformation on the micro- and nanoscales. The experimentally obtained patterns of structural evolution related to the heterogeneous reactions are compared with the results of molecular dynamics simulations carried out for the same reactive system. Based on the obtained data, the intrinsic mechanism of the reaction in Ni/Al RMNF is considered, which adequately explains the unusual parameters of a gasless combustion wave in such a system.

QuenchingReaction mechanismMaterials sciencePolymers and PlasticsMetals and AlloysCombustionStructural evolutionStructural transformationElectronic Optical and Magnetic MaterialsMolecular dynamicsComputational chemistryChemical physicsCeramics and CompositesReactive systemActa Materialia
researchProduct

Generation of narrowband antisymmetric lamb waves using a formed laser source in the ablative regime

2007

A formed laser source, using a four-element lenticular array, is used in the ablative regime to generate select, narrowband, acoustic plate waves. The arrangement of the array produces acoustical signals that have frequencies compatible with the response of the broadband capacitive air-coupled transducer used in this study. A simplified concept is presented to explain the effect of a line array source on the frequency content of acoustic waves. The analytical model for a point pulse surface displacement is derived from the point load solution to Lamb's problem. The point pulse displacement elements of a line array source are summed mathematically, taking into account all applicable propagat…

RAYLEIGH-WAVESAcoustics and UltrasonicsAcousticsLine sourceDisplacement (vector)Acoustic dispersionSettore ING-IND/14 - Progettazione Meccanica E Costruzione Di MacchineSonicationsymbols.namesakeLamb wavesOpticsCOMPOSITESScattering RadiationComputer SimulationElectrical and Electronic EngineeringRayleigh waveSURFACE ACOUSTIC-WAVESLINE SOURCEDispersion (water waves)InstrumentationPhysicsULTRASONIC-WAVESNONCONTACTbusiness.industryAIRLasersEquipment DesignAcoustic waveVELOCITYModels TheoreticalINSPECTIONEquipment Failure AnalysisSurface wavesymbolsComputer-Aided DesignbusinessPOINTIEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
researchProduct

Radiation processing for synthesis of structural materials

2009

Radiation Processing structural materials composites
researchProduct