Search results for "composites"
showing 10 items of 1905 documents
Evolution of the structural and optical properties from cobalt cordierite glass to glass-ceramic based on spinel crystalline phase materials
2007
Co 2+ -containing cordierite stoichiometric glasses have been prepared by melting colloidal gel precursors. After controlled thermal processing in the range of temperatures between 900 and 1300 C different polycrystalline, almost single phase materials displaying l-, a-, and b-cordierite crystalline forms were synthesized. In addition, spinel glass-ceramic materials were also prepared from the base glasses. All these materials were characterized by X-ray powder diffraction and infrared spectroscopy. Room temperature (RT) absorption and emission spectra of Co 2+ – cordierites and – spinel-glass material have allowed determining the local environment of the Co 2+ in the crystalline structure …
Mechanism of crystallization of pyroxene-based glass-ceramic glazes
2004
Abstract The mechanism of crystallization of a powdered glass with composition in the pyroxene crystallization primary field within the CaO–MgO–Al 2 O 3 –SiO 2 quaternary system and containing some additives was studied. The crystallization sequence was compared with that from the same base glass without additives. After a short thermal anneal both powdered glasses showed phase separation. Further thermal treatment gave rise to the crystallization of pyroxene. Anorthite as secondary crystalline phase was also detected in the quaternary glass (without additives). The starting crystallization in the glass with additives took place in the outer surface of glass particles probably in the immisc…
Li2OSiO2Al2O3MeIIO Glass-Ceramic Systems for Tile Glaze Applications
1991
In order to verify the possibility of using glass-ceramic materials as tile coatings, the devitrification processes of three industrial formulations belonging to the Li2O─Al2O3─SiO2 glass-ceramic system were investigated by differential thermal analysis, X-ray diffractometry, scanning electron microscopy, and IR spectroscopy. Compositional variations were made by addition of large amounts of MgO or CaO or PbO (ZnO) oxides as well as through smaller additions of other oxides. In these systems the surface crystallization contributes appreciably to the bulk crystallization mechanism. All the systems investigated show a high tendency toward crystallization even at very high heating rates, devel…
Microstructural Evolution in Fast-Heated Cordierite-Based Glass-Ceramic Glazes for Ceramic Tile
2004
The crystallization mechanism of α-cordierite from a B 2 O 3 -and TiO 2 -containing glass submitted to fast heating in the cordierite primary phase field of the CaO-MgO-Al 2 O 3 -SiO 2 quaternary system was investigated. Addition of B 2 O 3 to a SiO 2 -rich glass suppressed the formation of μ-cordierite. This suppression facilitated densification by viscous flow before crystallization. Powder X-ray diffractometry, field-emission electron scanning microscopy, and energy-dispersive X-ray analysis revealed that α-cordierite nucleated directly from glass on the boundaries of original particles and was probably favored by TiO 2 , which acted as a nucleant. The growth kinetics of α-cordierite cry…
Effect of MgO/CaO ratio on the microstructure of cordierite-based glass-ceramic glazes for floor tiles
2005
Abstract The effect of the MgO/CaO ratio on the microstructure and microhardness of cordierite-based glass-ceramic glazes was studied. For this purpose glasses, with compositions in the cordierite primary phase field of the CaO–MgO–Al 2 O 3 –SiO 2 quaternary system and, with different MgO/CaO ratios, were prepared by melting. Glass powder pellets pressed under low pressure were fast heated at several temperatures simulating industrial floor-tile processing, and characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy dispersive X-ray emission spectroscopy (EDX). The studied glasses crystallized α-cordierite as the only crystalline phase…
Precipitation synthesis of magnetite Fe3O4 nanoflakes
2014
Precipitation can be applied to synthesize magnetite Fe3O4 nanoflakes in an ambient air atmosphere without using any surfactant, templates or special equipment. Magnetite nanoflakes were precipitated from only Fe2+ chloride solution without adding Fe3+. The formation of Fe3O4 nanoflakes is suggested to occur due to formation of an intermediate goethite phase, thus providing anisotropic crystal growth. Compared to other methods, the method presented here is fast and suitable for large scale synthesis.
Molecular structure and multi-body potential of mean force in silica-polystyrene nanocomposites
2018
We perform a systematic application of the hybrid particle-field molecular dynamics technique [Milano et al, J. Chem. Phys. 2009, 130, 214106] to study interfacial properties and potential of mean force (PMF) for separating nanoparticles (NPs) in a melt. Specifically, we consider Silica NPs bare or grafted with Polystyrene chains, aiming to shed light on the interactions among free and grafted chains affecting the dispersion of NPs in the nanocomposite. The proposed hybrid models show good performances in catching the local structure of the chains, and in particular their density profiles, documenting the existence of the "wet-brush-to-dry-brush" transition. By using these models, the PMF b…
Experimental analysis and micromechanical models of high performance renewable agave reinforced biocomposites
2017
Abstract The present work deals with the experimental study of high performance biocomposites reinforced with optimized agave fibers, as well as the successive implementation of reliable micromechanical models that can be used at the design stage. In detail, systematical experimental analyses performed on biocomposites with epoxy or PLA matrix, have permitted to highlight that for short fibers biocomposites the reinforcing leads to a significant improvement of the matrix stiffness, whereas the particular damage mechanism based essentially on the matrix failure with consequent tensile failure of the fibers aligned with the applied load, does not allow to obtain an actual reinforcing of the m…
A simplified predictive approach to assess the mechanical behavior of pinned hybrid composites aged in salt-fog environment
2020
Abstract Aim of this paper is to assess the predictive capabilities of a simplified theoretical approach on the failure load of aged pinned hybrid composites. In particular, the mechanical performances of glass-flax hybrid epoxy laminates exposed to salt spray fog environment, were used as input data in order to address the analytical model. Preliminarily, the relationship among mechanical performances, failure mechanisms, joint geometry and ageing time, was evaluated by double-lap joint tests on pinned samples at varying joint geometry and ageing time. The bearing and shear out limit stress of samples aged for 60 days under the salt-fog environment underwent a reduction of about 20% compar…
Effect of curing time on the performances of hybrid/mixed joints
2013
Abstract The aim of this work is the study of a mixed method used for the joining of aluminum alloys with glass reinforced polymer’s substrates (in the next GFRP). In particular, the technique of self-piercing riveting (in the next SPR) was applied on a co-cured joint in order to evaluate the influence of the time of inserting the rivet on the mechanical behavior of the mixed joints. Three different joints were realized: adhesive by co-curing technique, mechanical by self piercing riveting (in the next SPR) and a mixed one in which the joining techniques (i.e. adhesive and mechanical) were combined. In particular, to determine the optimum time to insert the rivet, three different times from…