Search results for "composites"
showing 10 items of 1905 documents
Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites
2014
Abstract This work investigates the hydrothermal ageing behaviour of a carbon fibre reinforced laminate and its epoxy matrix in bulk conditions. A model DGEBA epoxy is employed, and water uptake and dynamic mechanical thermal (DMTA) analyses have been performed on both the composites and bulk resin. Fracture toughness of the bulk resin has been measured, evidencing a substantially unmodified critical stress intensity factor KIC, although the evidence of plasticisation effects given by DMTA. Interlaminar Mode I fracture toughness of the composite showed a variable trend towards slight decreases or slight increases, according to the prevailing toughening or embrittling mechanisms activated by…
Damage in composites : from physical mechanisms to modelling
2006
International audience; The most critical types of damage in composite materials are transverse cracking, delamination and fiber breaking. The simulation of the behaviour and the rupture of these materials shows that it is important to consider failure mechanism in the design of structures. Each mechanism induces local deteriorations which can be accelerated when they are coupled with other mechanisms. Global criteria are unable to predict neither these processes nor their interactions. This paper is an attempt to propose realistic criteria which are the witness of local degradations and can be used for the design of composite structures.
Immobilization and controlled release of prostaglandin E2 from poly-L-lactide-co-glycolide microspheres.
2009
Prostaglandin E(2) (PGE(2)) is an arachidonic acid metabolite involved in physiological homeostasis and numerous pathophysiological conditions. Furthermore, it has been demonstrated that prostaglandins have a stimulating effect not only on angiogenesis in situ and in vitro but also on chondrocyte proliferation in vitro. Thus, PGE(2) represents an interesting signaling molecule for various tissue engineering strategies. However, under physiological conditions, PGE(2) has a half-life time of only 10 min, which limits its use in biomedical applications. In the present study, we investigated if the incorporation of PGE(2) into biodegradable poly-L-lactide-co-glycolide microspheres results in a …
Rapid one-pot propargylamine synthesis by plasmon mediated catalysis with gold nanoparticles on ZnO under ambient conditions
2013
Surface plasmon excitation of gold nanoparticles on ZnO in the presence of an aldehyde, an amine and phenylacetylene led to rapid and selective formation of propargylamines with good yields (50-95%) at room temperature. Plasmon mediated catalysis is the best available route for this ternary coupling.
Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis
2005
Abstract This paper provides a new comprehensive analysis of part surface finish in continuous dry turning of a hardened construction steel when using mixed alumina cutting tools. Consequently, the surface profiles (2D arragement) and surface microstereometries (3D arragement) generated during different hard part turning operations on a 40H low chromium alloy steel (equivalent to AISI 5140 or DIN 41Cr4), heat treated to the hardness of about 60 HRC, were evaluated. As a result, this paper aggregates the multi-parameters characterization of the surface roughness with the machined surface structure obtained at the three selected feed rates and constant cutting speed of 100 m/min. Results show…
Computer simulation of metal flow in the hot upsetting of a high-strength aluminium alloy
1993
Abstract The effects of metal-working temperature on the hot axisymmetric upsetting of AA 7012 aluminium alloy were investigated in the temperature range of from 250 to 400°C, at a strain rate of 4 s −1 . The material behaviour was studied by means of simulative methods based on the analysis of torsion-test results which have shown that when the strain increases, the flow stress increases to a peak value and then decreases to a fracture value. Furthermore, the flow stress decreases with decreasing strain rate and with increasing temperature. Constitutive equations, describing accurately the hot deformation behaviour of the material, were defined and used subsequently in a numerical model th…
One-Step Synthesis and Consolidation of Nanophase Iron Aluminide
2001
The simultaneous synthesis and densification of nanophase iron aluminide is investigated. Elemental nanophase reactants produced by mechanical activation were reacted by field activation with the simultaneous application of uniaxial pressure. The process was demonstrated in this work by the synthesis of dense nanometric FeAl. Iron and aluminum powders were co-milled in a specially designed planetary mill to obtain nanometric reactants and to avoid formation of any product phases. These powders were then subjected to high AC currents (1250–1500 A) and pressures in the range of 70–106 MPa. Under these conditions, a reaction was initiated and completed within a short period of time (2.5–3.5 mi…
Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activate…
2004
The preparation of highly dense bulk materials with a grain size in the range of a few to a few hundreds nanometers is currently the objective of numerous studies. In our research we have achieved a measure of success in this regard by using the methods of mechanically-activated, field-activated, pressure-assisted synthesis, MAFAPAS, which has been patented, and mechanically-activated spark plasma sintering, MASPS. Both methods, which consist of the combination of a mechanical activation step followed by a consolidation step under the simultaneous influence of an electric field and mechanical pressure, have led to the formation of dense nanostructured ceramics, intermetallics, and composite…
On the influence of tool path in friction stir spot welding of aluminum alloys
2008
Abstract Friction stir spot welding (FSSW) has been proposed as an effective technology to spot weld the so-called “difficult to be welded” metal alloys. In the paper, a variation of the FSSW process has been considered. A tool path is given after the sinking phase nearby the initial penetration site; in this way a larger welding spot is obtained and more material is involved in the bonding process. The process mechanics of such modified FSSW process is highlighted and the joint strength undergoing tensile tests is considered at the varying both of the assigned tool path and of a few process parameters. Macro- and micro-analyses are made in order to analyze the local material microstructure…
On microstructural phenomena occurring in friction stir welding of aluminium alloys
2006
Abstract The results of experimental activity on friction stir welding (FSW) of aluminum alloys are reported. Butt joints of two different materials, namely AA2024-T4 and AA7075-T6, were investigated from a metallurgical point of view. Grain dimensions and insoluble particle densities were investigated both in the parent materials and in the joints. Furthermore, the effect of post-welding heat treatments on the joint strength was studied.