Search results for "composites"
showing 10 items of 1905 documents
Structure-properties relationships of polyhedral oligomeric silsesquioxane (POSS) filled PS nanocomposites
2012
The polyhedral oligomeric silsesquioxane (POSS) additivated polystyrene (PS) based nanocomposites were pre- pared by melt processing and the structure-properties relationships of the POSS-PS systems were compared to those of the neat PS. In order to investigate the effect of these structural parameters on the final properties of the polymer nanocompos- ites, five different kinds of POSS samples were used, in particular, POSS with different inorganic cage and with different organic pendent groups. The rheological investigation suggests clearly that the POSS acts as a plasticizer and that the processability of the PS was positively modified. The affinity between the POSS samples and the PS ma…
Thermal stability and flammability of polyolefin/halloysite nanotubes composites
2015
Najnowsze badania w zakresie uniepalniania poliolefin są ukierunkowane na zastosowanie dodatku nanorurek haloizytowych (HNT) jako bezhalogenowego środka zmniejszającego palność, a jednocześnie zachowującego właściwości mechaniczne osnowy. Powstająca na powierzchni płonącego nanokompozytu, zawierającego HNT, warstwa tzw. zgorzeliny ogranicza przenikanie gazów oraz ciepła i zabezpiecza materiał przed dalszym paleniem. Unikatowa struktura HNT umożliwia dodatkowo pochłanianie produktów termicznego rozkładu poliolefinowej osnowy. Na podstawie dostępnej literatury dokonano oceny wpływu różnych czynników, m.in. modyfikacji nanorurek haloizytowych i/lub dodatku kompatybilizatora i/lub doboru odpowi…
Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension
2004
The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.
Static and dynamic elasticity of some thermotropic liquid-crystalline copolyesters
1997
Two series of thermotropic liquid crystalline copolyesters were studied in static and dynamic tensile deformation. Static loading generally does not lead to any peculiar phenomena: the stress-strain diagrams are linear or convex, except one copolyester fibre, the stress-strain diagram of which is concave at high temperatures. On the contrary, in dynamic loading the elasticity modulus increased during deformation for all the samples investigated. So it can be assumed that formation of a more rigid and stable structure takes place due to the dynamic deformation.
Accceleration of Fatigue Tests of Polymer Composite Materials by Using High-Frequency Loadings
2004
The possibility of using high-frequency loading in fatigue tests of polymer composite materials is discussed. A review of studies on the use of high-frequency loading of organic-, carbon-, and glass-fiber-reinforced plastics is presented. The results obtained are compared with those found in conventional low-frequency loadings. A rig for fatigue tests of rigid materials at loading frequencies to 500 Hz is described, and results for an LM-L1 unidirectional glass-fiber plastic in loadings with frequencies of 17 and 400 Hz are given. These results confirm that it is possible to accelerate the fatigue testing of polymer composite materials by considerably increasing the loading frequency. The n…
Creep and damage accumulation in orthotropic composites under cyclic loading
1998
Experimental results and theoretical prediction of the response of glassfiber-reinforced polyester under quasi-static, static (creep), and cyclic (fatigue) loading are presented. The nonlinear strain component at static loading and the strain amplitude rate at cyclic off-axis loading of an orthotropic composite are shown to follow the associated flow rule with a single-parameter quadratic potential function. The influence of fatigue damage on deformation is considerable due to the reduction in the elastic modulus of the composite and is apparently negligible with respect to its effect on the parameters of the creep kernel.
Measurement of dynamic characteristics of latex foams by the antiresonance method
2000
Measuring and calculation methods for the dynamic characteristics of tubular specimens of low-modulus latex foams and composites based on them, under longitudinal vibrations in a low-frequency region (up to 200 Hz), are developed. The method is based on the effect of antiresonance. Data on the influence of the basic formulation-processing factors on the dynamic characteristics (gelatination time and content of the plasticizer and chopped fibers) are presented. The results obtained can be used to choose the composition of latex foams for lining acoustic channels, injectors, ejectors, and phase inverters, as well as to control products quality. This method can be applied directly to full-size…
Physicomechanical properties of composites from recycled polyethylene and linen yarn production wastes
1999
The possibilities of utilizing wastes of linen thread production (chaffs, spinning and roving losses) in recycled polyolefin composites have been investigated. The wastes were mixed with recycled polyethylenes (produced from domestic and industrial film production wastes). The physicomechanical properties (tensile strength, bending and tensile moduli, and water resistance) and the fluidity (melt flow-behavior index) for systems with a different filler content are estimated. Almost all the composite materials obtained have satisfactory fluidity (melt flow-behavior index is not lower than 0.07–0.15 dg/min). For all types of the composites, a slight increase in tensile strength and a considera…
Linear Viscoelasticity of Liquid-Crystalline Polymers
2004
A linear (small-amplitude) periodic shear deformation of anisotropic viscoelastic liquids obeying the Akay–Leslie rheological model is considered. The frequency dependences of the real and imaginary components of the complex shear modulus and complex normal-stress coefficient are determined. A comparison between calculation results and test data on the shear flow of poly(γ-benzylglutamate) in m-cresol is carried out. It is stated that, if the material is characterized by some initial orientation, both components of the complex shear modulus contain a multiplier which depends on the degree of the initial orientation and increases the values of the components compared with those for an initia…
Experimental assessment of the improved properties during aging of flax/glass hybrid composite laminates for marine applications
2018
The investigation for natural fibers composites in terms of performance, durability, and environmental impact for structural applications in marine environments is a relevant challenge in scientific and industrial field. On this context, the aim of this work is to assess the durability and mechanical stability in severe environment of epoxy/glass–flax hybrid composites. For the sake of comparison, also full flax and glass epoxy composites were investigated. All samples were exposed to salt–fog environmental conditions up to 60 aging days. Wettability behavior during time was compared with water uptake evolution to assess water sensitivity of hybrid composite configurations. Moreover, quasi-…