Search results for "construction"
showing 10 items of 2670 documents
Utilization of water glass as an activator in the manufacturing of cementitious materials from waste by-products
1987
Abstract In the present paper, the possibility of producing new-type cementless building materials is discussed when water glass as an activating agent is used. The experimental data are presented for a set of raw materials which normally do not show any binding ability. However, if they undergo some physico-chemical treatment and water glass is used, a solid structure of the material is formed. According to the method described here, lots of different mineral waste by-products could be activated, thus gaining binding properties.
The coffee-house: Upcycling spent coffee grounds for the production of green geopolymeric architectural energy-saving products
2023
This study investigates a possible alternative reuse of spent coffee grounds (SCG), the major residue of the brewing process, to manufacture green geopolymeric materials for innovative building applications in energy-saving construction, in line with the European Green Deal towards zero-energy building. Specimens were prepared by a combination of biomass fly ash from the Kraft paper-pulp process, as raw material (70 wt%), and SCG (up to 17.5 %), as filler. The high amount of reused bio-wastes makes the material fit the requirements for the Minimum Environmental Criteria (MEC) certification, in light of the Circular Economy (CE) approach. Sustainability is also boosted by the manufacturing p…
Enzymatic biodiesel: Challenges and opportunities
2014
The chemical-catalyzed transesterification of vegetable oils to biodiesel has been industrially adopted due to its high conversion rates and low production time. However, this process suffers from several inherent drawbacks related to energy-intensive and environmentally unfriendly processing steps such as catalyst and product recovery, and waste water treatment. This has led to the development of the immobilized enzyme catalyzed process for biodiesel production which is characterized by certain environmental and economical advantages over the conventional chemical method. These include room-temperature reaction conditions, elimination of treatment costs associated with recovery of chemical…
Improved Bone Regeneration Using Biodegradable Polybutylene Succinate Artificial Scaffold in a Rabbit Model
2022
The treatment of extensive bone loss represents a great challenge for orthopaedic and reconstructive surgery. Most of the time, those treatments consist of multiple-stage surgeries over a prolonged period, pose significant infectious risks and carry the possibility of rejection. In this study, we investigated if the use of a polybutylene succinate (PBS) micro-fibrillar scaffold may improve bone regeneration in these procedures. In an in vivo rabbit model, the healing of two calvarial bone defects was studied. One defect was left to heal spontaneously while the other was treated with a PBS scaffold. Computed tomography (CT) scans, histological and immunohistochemical analyses were performed …
A multiproxy record of palaeoenvironmental conditions at the Middle Palaeolithic site of Abric del Pastor (Eastern Iberia)
2019
This paper presents a multiproxy palaeoenvironmental study from Abric del Pastor (Alcoy, Spain), a rock shelter which has yielded evidence for Middle Palaeolithic human occupation. The sedimentary sequence has been analysed for lipid biomarker n-alkane abundances (ACL, CPI), compound specific leaf wax δH and δC, and bulk organic geochemistry (TOC, %N, %S), providing a record of past climate and local vegetation dynamics. Site formation processes have been reconstructed through the application of soil micromorphology. Analyses of anthracological, microvertebrate and macrofaunal assemblages from selected subunits are also presented here. Our data indicates that a variable climate marked by pr…
Efficient removal of bisphenol A from wastewaters: Catalytic wet air oxidation with Pt catalysts supported on Ce and Ce–Ti mixed oxides
2019
Catalytic wet air oxidation (CWAO) of an aqueous solution of bisphenol A (BPA) was investigated at 160 ℃ and 2.0 MPa of air in a batch reactor. Activity of supported platinum catalysts (2.5 wt%), prepared by wet impregnation, was compared with pure cerium and cerium–titanium oxide catalysts. Supported platinum catalysts showed higher activities in the removal of BPA than pure CeO2, Ce0.8Ti0.2O2 and Ce0.2Ti0.8O2. The oxidation reaction was followed the pseudo-first order rate law and the highest BPA removal, 97% and 95%, was achieved with Pt/CeO2 and Pt/Ce0.8Ti0.2O2 catalysts respectively. The CWAO of BPA aqueous solution was not a surface area specific reaction but the more important factor…
A comparative life-cycle assessment of asphalt mixtures for railway sub-ballast containing alternative materials
2018
Abstract Bituminous sub-ballast in railway track-bed can mitigate the variation of the moisture content in the subgrade and reduce vertical stiffness variations of the track leading to a more durable infrastructure. Nevertheless, durability is only one of the aspects that affects the sustainability of an infrastructure. Other relevant aspects are related to the environmental and economic issues. This research work joins the worldwide effort towards a paradigm shift in civil engineering devoted to assess the sustainability of infrastructures at the design stage. With this in mind, in this study different alternative bituminous sub-ballast mixtures containing recycled materials, namely crumb …
Free segmentation in rendered 3D images through synthetic impulse response in integral imaging
2016
Integral Imaging is a technique that has the capability of providing not only the spatial, but also the angular information of three-dimensional (3D) scenes. Some important applications are the 3D display and digital post-processing as for example, depth-reconstruction from integral images. In this contribution we propose a new reconstruction method that takes into account the integral image and a simplified version of the impulse response function (IRF) of the integral imaging (InI) system to perform a two-dimensional (2D) deconvolution. The IRF of an InI system has a periodic structure that depends directly on the axial position of the object. Considering different periods of the IRFs we …
Convolution-based ensemble learning algorithms to estimate the bond strength of the corroded reinforced concrete
2022
Reinforced concrete bond strength deterioration is one of the most serious problems in the construction industry. It is one of the most common factors impacting structural deterioration and the major cause of premature decadence of reinforced concrete structures. Therefore, developing an accurate model with the lowest variance and high reliability for the bond strength of corroded reinforced concrete is very important. The current work evaluates the efficiency of convolution-based ensemble learning algorithms. To address these issues, convolution-based ensemble learning models are developed using a database collected from the previous experimental studies of relative bond strength for corro…
Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns
2021
Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…