Search results for "contact area"
showing 10 items of 33 documents
Survey of the mean pressure exerted by a wide range of tractors on the soil
2010
In order to predict the mean pressure exerted by a vehicle tyre on the soil, in 1984 Plackett suggested measuring the contact area of a tyre on a hard surface. The model proposed by Hallonborg in 1996, based on the “super ellipse theory”, provided the best results in terms of prediction of the tyre-soil contact area. In this study 82 4WD tractors with different power, mass and age of manufacture were surveyed. Relying on their technical features, the contact area of the front and rear tyres of each tractor and, therefore, their pressure on the soil was calculated, in order to assess the attention paid by manufacturers to soil compaction. The results of this survey showed that the mean press…
Improving surface detection on nanoindentation of compliant materials
2010
Nanoindentation is a versatile tool for monitoring mechanical properties on a local scale. Accurate knowledge of a contact area, and therefore an initial contact, is however necessary for translating the force curve into sample mechanical properties. It is shown that methods for sensing an initial contact by depth sensing instruments (DSI) may be severely in error for compliant materials. With the hardware adopted in this work, the threshold is determined by the elastic modulus; hence the error potentially increases if the material becomes more compliant. A simple method is therefore suggested to determine with accuracy the initial contact on compliant materials whereby the surface contact …
Dependence of thermal conductivity on structural parameters in porous samples
2012
The in-plane thermal conductivity of porous sintered bronze plates was studied both experimentally and numerically. We developed and validated an experimental setup, where the sample was placed in vacuum and heated while its time-dependent temperature field was measured with an infrared camera. The porosity and detailed three-dimensional structure of the samples were determined by X-ray microtomography. Lattice-Boltzmann simulations of thermal conductivity in the tomographic reconstructions of the samples were used to correct the contact area between bronze particles as determined by image analysis from the tomographic reconstructions. Small openings in the apparent contacts could not be de…
Rib-Roller Wear in Tapered Rolling Element Bearings: Analysis and Development of Test Rig for Condition Monitoring
2020
Rolling Element Bearings (REBs) are present in virtually all machines with moving or rotating parts, and are vital for proper performance and safe operation. Condition Monitoring (CM) of bearings often receive particular interest, as this component group rarely reach design lifetime and hence is responsible for unplanned machine downtime. Unplanned maintenance can represent a large cost which motivates development of improved CM methods for implementation of advanced maintenance regimes. Based on observations of a used bearing from an offshore drilling machine, wear on roller ends in the rib-roller contact area was identified as an area of interest for future research. A test rig for creati…
Manipulation of nanoparticles of different shapes inside a scanning electron microscope
2014
In this work polyhedron-like gold and sphere-like silver nanoparticles (NPs) were manipulated on an oxidized Si substrate to study the dependence of the static friction and the contact area on the particle geometry. Measurements were performed inside a scanning electron microscope (SEM) that was equipped with a high-precision XYZ-nanomanipulator. To register the occurring forces a quartz tuning fork (QTF) with a glued sharp probe was used. Contact areas and static friction forces were calculated by using different models and compared with the experimentally measured force. The effect of NP morphology on the nanoscale friction is discussed.
Carbon nanotube field-effect devices with asymmetric electrode configuration by contact geometry
2014
We have studied experimentally the conductive properties of single walled carbon nanotube (SWNT) based field-effect type devices, with different contact geometries at the connecting electrode. The device designs are asymmetric with one end of the SWNT having the metal electrode deposited on top and immersing it, while at the other end, the SWNT is on top of the electrode. The devices were made with either gold or palladium as electrode materials, of which the latter resulted in different behavior of the different contact types. This is argued to be caused by the existence of a thin insulating layer of surface adsorbents on the palladium, possibly Pd5O4, the effect of which is enhanced by th…
The role of intermolecular forces in contact electrification on polymer surfaces and triboelectric nanogenerators
2019
This research was supported by the European Regional Development Fund within the project ‘‘Hybrid energy harvesting systems’’ 1.1.1.1./16/A/013.
Effect of the elongational flow on morphology and properties of polypropylene/graphene nanoplatelets nanocomposites
2018
Abstract In this work the effect of the presence of graphene nanoplatelets (GnP) on the morphology and mechanical properties of polypropylene/GnP nanocomposites has been investigated when these polymer systems are subjected to non-isothermal elongational flow in a melt spinning operation. The presence of the GnP magnifies the effect of the elongational flow. Indeed, the elastic modulus and the tensile strength of nanocomposites increases with the orientation more than that observed for the pure matrix. Moreover, the elongation at break increases at low values of the draw ratio for the nanocomposites, while, the matrix shows the expected decrease in deformability. These effects have been cor…
Have tractor manufacturers bore in mind soil compaction over the last 40 years?
2019
Soil compaction is the compression of soil particles in a lower volume as a consequence of the reduction of the spaces existing among the particles themselves. This phenomenon is caused by natural forces and, above all, human ones. In order to estimate the field damages that can be caused by the traffic of agricultural machines, the load and the mean pressure applied by the tyres onto the soil can be measured. The research aim is to determine the pressure applied by each considered tractor onto the soil, in order to evaluate the effect of the traffic of tractors onto the soil itself. A total of 783 wheeled tractors manufactured and marketed in the last 35 years (1979-2014) was investigated.…
Segregation in Drying Binary Colloidal Droplets
2019
When a colloidal suspension droplet evaporates from a solid surface, it leaves a characteristic deposit in the contact region. These deposits are common and important for many applications in printing, coating, or washing. By the use of superamphiphobic surfaces as a substrate, the contact area can be reduced so that evaporation is almost radially symmetric. While drying, the droplets maintain a nearly perfect spherical shape. Here, we exploit this phenomenon to fabricate supraparticles from bidisperse colloidal aqueous suspensions. The supraparticles have a core-shell morphology. The outer region is predominantly occupied by small colloids, forming a close-packed crystalline structure. Tow…