Search results for "convers"
showing 10 items of 1092 documents
Monte Carlo simulation of energy absorbed in phenolic ESR dosimeters added with gadolinium exposed to thermal, epithermal and fast neutrons
2017
Abstract In this work analyses of the energy released per unit mass in phenolic compound exposed to neutron beams were performed with the aim of predicting the increase in dose achievable by addition of gadolinium (Gd) inside the pellets. In particular, Monte Carlo (MC) simulations were carried out for IRGANOX® 1076 phenolic compound irradiated with neutron beams with different energy spectra at various depths inside a water phantom. The addition of gadolinium increases sensitivity of phenolic ESR (electron spin resonance) dosimeters to neutrons thanks to the high gadolinium cross section for neutron capture and to the large number of secondary particles (mainly Auger and internal conversio…
Experimental Validation of a Novel Method for Harmonic Mitigation for a Three-Phase Five-Level Cascaded H-Bridges Inverter
2019
In modern high-power electrical drives, the efficiency of the system is a crucial constraint. Moreover, the efficiency of power converters plays a fundamental role in modern applications requiring also a limited weight, such as the electric vehicles and novel more electric aircraft. The reduction of losses pushes for systems with a dc bus and a high number of dc/ac converters, widespread in the vehicle, not burdened by a too expensive data processing system. The purpose of this article is to concur to reduce losses by proposing an innovative selective harmonic mitigation method based on the identification of the working areas where the reference harmonics present lower amplitudes. In partic…
Electrochemical conversion of carbon dioxide to formic acid: on the road to applicative scale
2018
In this context, electrochemical reduction of CO2 is considered one of the more attractive pathway to convert CO2, because the products can be selectively controlled by changing the operative conditions of the electrolysis. In the last years, an increasing attention has been devoted on the electrochemical conversion of CO2 to formic acid in water [2,3]. The main hurdle of the reduction of CO2 from water solution is the low CO2 solubility in water. In this work, the effect of some operating parameters, including pressure, current density, and flow rate, on the conversion of CO2 at tin flat cathodes to formic acid was studied using a pressurized filter-press cell with a continuous recirculati…
Electrochemical conversion of carbon dioxide: effect of the cell and of the operating parameters on the performances of the process.
2017
Recycling technologies of CO2 allow to introduce renewable energy in the chemical and energy chain, storing a renewable energy in the chemical form. In this context, electrochemical conversion of CO2 is considered one of the more interesting approaches, using excess electric energy from intermittent renewable sources. (1) Furthermore, products can be selectively controlled by changing the operating conditions of electrolysis. In particular, in the last years, an increasing attention has been devoted to the electrochemical conversion of CO2 to formic acid or formate in water. (2,3,4) The main hurdle of the reduction of CO2 from water solution is the low CO2 solubility in water. In this work,…
Assisted reverse electrodialysis for CO2 electrochemical conversion and treatment of wastewater: A new approach towards more eco-friendly processes u…
2020
Abstract In this paper, the utilization of assisted reverse electrodialysis (A-RED), recently used for pre-desalination, is proposed as a general method to reduce the energy requirements of electrolysis processes and evaluated for two model processes: (i) the cathodic conversion of carbon dioxide to formic acid; (ii) the anodic treatment of water contaminated by organics. In A-RED, two solutions with different salt content and an external potential difference, applied in the direction of the natural salinity gradient, are both used to drive redox processes. It was shown, for the first time, that the cathodic conversion of CO2 to formic acid can be performed by both reverse electrodialysis (…
Azatruxene‐Based, Dumbbell‐Shaped, Donor–π‐Bridge–Donor Hole‐Transporting Materials for Perovskite Solar Cells
2020
Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azo…
Size-dependent electron transfer from atomically defined nanographenes to metal oxide nanoparticles.
2020
Atomically defined nanographenes (NGs) feature size-dependent energy gaps induced by, and tuneable through, quantum confinement. Their energy-tunability and robustness make NGs appealing candidates as active elements in sensitized geometries, where NGs functionalize a metal oxide (MO) film with large-area-to-volume ratio. Despite the prominent relevance of NG/MO interfaces for developing novel architectures for solar energy conversion, to date, little information is available regarding the fundamentals of electron transfer (ET) processes taking place from NG donors to MO acceptors. Here, we analyze the interplay between the size of atomically precise NGs and ET dynamics at NG/MO interfaces.…
Genetic basis of human complement C4A deficiency. Detection of a point mutation leading to nonexpression.
1993
Abstract The fourth component of the human complement system (C4) is coded for by two genes, C4A and C4B, located within the MHC. Null alleles of C4 (C4Q0) are defined by the absence of C4 protein in plasma. These null alleles are due either to large gene deletions or to nonexpression of the respective genes. In a previous study, evidence was obtained for nonexpressed defective genes at the C4A locus, and for gene conversion at the C4B locus. To further characterize the molecular basis of these non-expressed C4A genes, we selected nine pairs of PCR primers from flanking genomic intron sequences to amplify all 41 exons from individuals with a defective C4A gene. The amplified products were s…
Synthesis and characterization of zinc carboxy–porphyrin complexes for dye sensitized solar cells
2018
Two zinc porphyrins, 2 and 8, have been synthesized. Porphyrin 8 displays better electronic communication between the dye and the TiO2 electrode. Photophysical measurements and electrochemistry experiments suggest that both porphyrins are very promising sensitizers for dye-sensitized solar cells (DSSCs). It was found that their molecular orbital energy levels favor electron injection and dye regeneration in DSSCs. Solar cells sensitized by 2 and 8 were fabricated, and it was found that they show power conversion efficiencies (PCEs) of 5.27% and 7.13%, respectively. Photovoltaic measurements (J–V curves) together with the incident photon-to-electron conversion efficiency spectra of the two c…
Design, assembly and characterization of silicide-based thermoelectric modules
2016
ID: 1143 In: Energy conversion and management, 13-21. Summary: Highlights•Novel silicide-based thermoelectric modules were experimentally investigated.•The modules produced high power of 1.04 W at 405 °C and 3.24 W at 735 °C.•An estimated module efficiency of 5.3% represent the highest reported for silicide systems.AbstractSilicides have attracted considerable attention for use in thermoelectric generators due mainly to low cost, low toxicity and light weight, in contrast to conventional materials such as bismuth and lead telluride. Most reported work has focused on optimizing the materials properties while little has been done on module testing. In this work we have designed and tested mod…