Search results for "cooling"
showing 10 items of 470 documents
The Continuous Extrusion Process CONFORM: a full 3D Thermal and Mechanical Analysis
2000
The principle of the Conform extrusion process is based on the action of a rotating wheel that drags and push the feed material by means of the frictional force existing between them. The Conform process has several advantages over the traditional extrusion processes. The preheating phase may be neglected, so that furnaces for heating are not necessary; furthermore, the product is continuous and welding phase of the billets is not required. The influence of three operative parameters, die geometry, velocity and die cooling rate, has been analysed in this paper by means of an “outranking approach” able to give precious indications for the assessment of the process.
Assessing the feasibility of cogeneration retrofit and district heating/cooling networks in small Italian islands
2017
Sustainability of energy supply strategies in small islands has been emerging as a severe issue, due to the large margins for improvement and rationalization of the most frequently adopted solutions. In most of the European islands, large amounts of heat are wasted by the operation of engine-based power plants; conversely, heat is produced by boilers (supplied by liquid fuels) or by electric equipment for a number of different uses, like domestic hot water production or space heating in winter. In this paper a techno-economic analysis is proposed to assess the feasibility of CHP-retrofit of the existing power plants and the possible utilization of the recovered heat to supply, via a distric…
Quality Assurance and Support Measures for Solar Cooling on System Level
2016
Abstract Within the IEA SHC Task 48 “Quality assurance and support measures for Solar Cooling” the analysis and evaluation of the systems has been one of the four main focuses. Here the activities are including the lab- and field-based characterization of the systems, the definition and application of performance figures, a guideline for a reliable monitoring procedure including methods for automated error detection and an updated overview on worldwide installed DEC systems including hints and good practice examples. They are furthermore leading to three different easy-to-use tools for solar cooling systems: The LCA tool considers environmental and energetic values for the evaluation, the P…
Numerical Modelling of Room Thermal Comfort Conditions
2006
Particular heat transfer coefficients of building elements gives quantitative notion only about heat losses through this building element. Analysis of the overall heat balance and heat losses of complete building and study of particular contribution of building elements in overall balance allows one to figure out the state of the building and find the building elements of bounding construction with most significant heat losses. Project variants of the buildings (or rebuilding in case of renovation), which ensure the desirable economy of energy and proportions of investments can be find varying the proportions of the surface area of building elements (e.g., windows and doors). A lot of facto…
Progress in the initial design activities for the European DEMO divertor: Subproject "Cassette"
2017
Abstract Since 2014 preconceptual design activities for European DEMO divertor have been conducted as an integrated, interdisciplinary R&D effort in the framework of EUROfusion Consortium. Consisting of two subproject areas, ‘Cassette’ and ‘Target’, this divertor project has the objective to deliver a holistic preconceptual design concept together with the key technological solutions to materialize the design. In this paper, a brief overview on the recent results from the subproject ‘Cassette’ is presented. In this subproject, the overall cassette system is engineered based on the load analysis and specification. The preliminary studies covered multi-physical analyses of neutronic, thermal,…
A novel hybrid polygeneration system supplying energy and desalinated water by renewable sources in Pantelleria Island
2017
Abstract In this paper a thermoeconomic analysis of a novel hybrid Renewable Polygeneration System connected to a district heating and cooling network is presented. The plant is powered simultaneously by solar and geothermal sources, producing electricity, desalinated water, heat and cooling energy. System layout includes Parabolic Through Collector (PTC) field, geothermal wells, Organic Rankine Cycle (ORC) unit and a Multi-Effect Desalination (MED) system. Cooling and thermal demands are calculated by suitable building dynamic simulation models, calibrated for Pantelleria Island. Electrical demand is obtained by measured data. A detailed control strategy has been implemented in order to pr…
Simple method of estimating consumption of internal combustion engine for hybrid application
2012
This article presents two simple methods to evaluate the fuel consumption of internal combustion engines. Furthermore, it points out the link between piston volume, engine size and fuel consumption as it gives the possibility to visualize the chosen working points inside an internal combustion engine operation points map. This leads to the fact that this approach is a very helpful tool for the design of hybrid systems including internal combustion engines. The two presented methods, one very simple, one more elaborated, are interesting as first approach of internal combustion engine sizing and to evaluate the consumption of internal combustion engine. The results for six pure internal combu…
APPLICATION OF MATHEMATICAL MODELS FOR THE SIMULATION OF THERMAL COMFORT CONDITIONS IN A LIVING ROOM
2005
The paper deals with the distributions of temperature and averaged turbulent airflows in living rooms in 2D and 3D approximations using Ansys/Flotran and Ansys/CFX software respectively. The distributions are calculated depending on the placement and temperature of heaters, heat transfer coefficients of the building structures and ventilation conditions. The authors analyse the influence of these factors on the air circulation and the related heat flows through building structures. The thermal balance of a room and its dependence on various external factors is also considered. As thermal comfort conditions’ parameters are analysed, the airflow velocities and indoor temperatures with its gra…
A new innovative cooling law for simulated annealing algorithms
2015
The present paper proposes an original and innovative cooling law in the field of Simulated Annealing (SA) algorithms. Particularly, such a law is based on the evolution of different initial seeds on which the algorithm works in parallel. The efficiency control of the new proposal, executed on problems of different kind, shows that the convergence quickness by using such a new cooling law is considerably greater than that obtained by traditional laws. Furthermore, it is shown that the effectiveness of the SA algorithm arising from the proposed cooling law is independent of the problem type. This last feature reduces the number of parameters to be initially fixed, so simplifying the prelimin…
Thermal comfort condition assessment in test buildings with different heating/cooling systems and wall envelopes
2017
Abstract The main aim of this study is a comprehensive analysis of long-term monitoring data of thermal comfort and discomfort parameters in small identical test buildings equipped with different heating/cooling systems. Calculations of PPD index expressed the human perception of thermal comfort and such discomfort factors like draught rate and vertical air temperature difference are provided for the room in winter season running three different heating systems – electric heater, air-air heat pump and air-water heat pump, as well as for the summer cooling with split type air conditioning systems. It is shown that the type of heating/cooling system and its working regime has a significant im…