Search results for "density polyethylene"
showing 10 items of 140 documents
Carboxylation of a linear low density polyethylene via gamma irradiation in presence of carbon dioxide in subcritical and supercritical conditions
1994
Abstract In this work the molecular modifications induced in a linear low density polyethylene gamma irradiated in presence of carbon dioxide both in subcritical and supercritical conditions are presented. The obtained results indicate that this process can be a new and interesting way in order to graft oxidized groups in the polyethylene chains. Moreover it is worth noting that, together with these functionalization reactions, also a significant crosslinking occurs, with improvement in some mechanical tensile behaviour.
Molecular modifications—Mechanical behaviour relationships for gamma irradiated LLDPE/PA6 blends
1994
Abstract The molecular modifications, due to γ radiation under vacuum, of linear low density polyethylene/polyamide 6 blends are presented and related to their mechanical behaviour. Solubility and melt viscosity tests indicate that in blends the polyethylene component undergoes mainly crosslinking phenomena, whereas the main effect on polyamide is chain branching. According to these molecular modifications, the most relevant effect is the increase of the tensile modulus for the polyethylene rich blends and the increase of the impact strength for the polyamide rich blends.
Structural induced modifications in blends of polyamide with gamma irradiated low density polyethylene
1992
Abstract Blends of gamma irradiated and unirradiated low density polyethylene and polyamide 6 were made in order to study possible modifications induced by this irradiation. Results indicate that blends with gamma irradiated polyethylene have structure and properties significantly different with respect to blends made with the unirradiated one. This difference has been ascribed to the formation of functionalized groups in the polyethylene chains, which interact with polyamide.
Small angle scattering study of the structure of isotactic polypropylene-hydrogenated oligo(cyclopentadiene) blends
1996
Abstract Blends of isotactic polypropylene ( i PP) and hydrogenated oligo cyclopentadiene (HOCP) have been studied by means of small angle X-ray scattering in the temperature range 70–160°C. The structure of blends containing less than 25% HOCP is very similar to the one of plain i PP, i.e. lamellae whose thickness increases by increasing the temperature. Blends containing more than 25% HOCP are characterized by two kinds of lamellae formed by layers of i PP and amorphous material rich in i PP and in HOCP, respectively. The crystallizable i PP present in both phases crystallizes from the melt, in analogy to what happens in HDPE/HOCP blends and in agreement with the values of the crystallini…
Effects of organoclay on morphology and properties of nanocomposites based on LDPE/PA-6 blends without and with SEBS-g-MA compatibilizer
2009
LDPE/PA-6 blends (75/25 wt/wt) were added with SEBS-g-MA (S) and/or an organoclay (20A) using different compounding sequences and the morphology and the properties of the blends or composites were investigated. An XRD study of the nanocomposites with pure polymers showed that 20A is intercalated by LDPE or PA-6 chains, whereas it is exfoliated by S if the clay concentration does not exceed 10 wt%. The SEM investigation showed that both S and 20A behave as efficient emulsifying agents for the LDPE/PA-6 blends. However, their effect on the mechanical properties was found to be opposite: S enhanced toughness but lowered the stiffness, whereas 20A improved the elastic modulus but impaired the i…
Research of the physical-chemical properties of adhesive radiation-modified thermosetting materials based on polyolefins and their composites
1999
The present paper surveys the investigation results of the adhesive behavior with steel of different polyethylenes (LDPE, HDPE) irradiated with γ-radiation in vacuum, oxygen, and air, using rheological, optical, thermomechanical and other methods. To study the adhesive contact, the technological parameters applicable to thermosetting polymer material were taken into consideration. The results show the suitable methods in order to obtain thermosetting polymer materials with improved adhesive and thermomechanical properties.
Pro-Degradant Activity of Naturally Occurring Compounds on Polyethylene in Accelerate Weathering Conditions
2019
In this work, naturally occurring compounds, such as Vitamin E (VE) and Ferulic Acid (FA), at high concentrations, have been considered as pro-degradant agents for Low Density Polyethylene (PE). However, all obtained results using the naturally occurring molecules as pro-oxidant agents for PE have been compared with the results achieved using a classical pro-oxidant agent, such as calcium stearate (Ca stearate) and with neat PE. The preliminary characterization, through rheological, mechanical and thermal analysis, of the PE-based systems highlights that the used naturally occurring molecules are able to exert a slight plasticizing action on PE and subsequently the PE rigidity and crystalli…
Competition between chain scission and branching formation in the processing of high-density polyethylene: effect of processing parameters and of sta…
2009
Two samples of high-density polyethylene with different molecular weight were processed in a batch mixer and the rheological and structural properties were investigated. In particular, the effect of different processing parameters and the eventual presence of different stabilizers were evaluated. Actually, two reactions may occur during processing: branching/crosslinking or chain scission. The results indicate that when the processing conditions promote a scarce mobility of the macromolecular chains (lower temperatures, lower mixing speed, and higher molecular weight), branching is more favored than chain scission. On increasing the mobility of the chain (higher temperature, higher mixing s…
Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests
2011
Polyethylene grafted with itaconic acid was subjected to weathering under laboratory accelerated conditions. The course of the photo-oxidative degradation process of that material was studied by FTIR spectroscopy both through quantitative measurements of changes in absorbance values at selected wave numbers and through measurements of surface area values for absorption bands which were separated by means of deconvolution. The use of both those procedures of quantitative determinations resulted in a general conclusion that the oxidation process was initiated from the very first moment of irradiation, and it produced ketones, acids, esters (intramolecular and of acetate type), peracids, peres…
Rheological Properties of Different Film Blowing Polyethylene Samples Under Shear and Elongational Flow
2005
Summary: The rheological behavior of polyethylenes ismainly dominated by the molecular weight, the molecularweight distribution and by the type, the amount and thedistribution of the chain branches. In this work a linearmetallocenecatalyzedpolyethylene(m-PE),abranchedme-tallocene catalyzed polyethylene (m-bPE), a conventionallinear low density polyethylene (LLDPE) and a low densitypolyethylene (LDPE) have been investigated in order tocompare their rheological behavior in shear and in elonga-tional flow. The four samples have similar melt flow indexand in particular a value typical of film blowing grade.The melt viscosity has been studied both in shear and inisothermal and non-isothermal elonga…