Search results for "dielectric propertie"
showing 10 items of 26 documents
Influence of cation order on the dielectric properties of (1 – x)Pb(Sc 0:5 Nb 0:5 )O 3 -xPb(Yb 0:5 Nb 0:5 )O 3 ceramics
2020
Ceramic lead niobates and their solid solutions (1 - x)Pb(Sc0:5Nb0:5)O3 - xPb(Yb0:5Nb0:5)O3 were synthesized by solid state reactions from oxides. The structure of investigated samples was characterized by X-ray diffraction (XRD). Dielectric studies of the ceramics were performed by means of broadband dielectric spectroscopy at the temperature ranging from 600 K to 140 K. For all ceramic samples a diffuse phase transition as well as relaxor ferroelectric behavior were observed. © 2020 Barbara Garbarz-Glos et al., published by Sciendo 2020. This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The Ba2LnFeNb4O15 “tetragonal tungsten bronze”: Towards RT composite multiferroics
2009
Several Niobium oxides of formula Ba2LnFeNb4O15 (Ln = La, Pr, Nd, Sm, Eu, Gd) with the Tetragonal Tungsten Bronze (TTB) structure have been synthesised by conventional solid-state methods. The Neodymium, Samarium and Europium compounds are ferroelectric with Curie temperature ranging from 320 to 440K. The Praseodymium and Gadolinium compounds behave as relaxors below 170 and 300 K respectively. The Praseodymium, Neodymium, Samarium, Europium and Gadolinium compounds exhibit magnetic hysteresis loops at room temperature originating from traces of a barium ferrite secondary phase. The presence of both ferroelectric and magnetic hysteresis loops at room temperature allows considering these mat…
Optimization of anodizing process of tantalum for Ta2O5-based capacitors
2020
Anodic oxides were grown to 50 V on Ta in several organic ions containing anodizing baths. Their properties were compared with anodic Ta oxide film grown to the same formation voltage in 0.1 M NaOH. Anodizing process carried out in sodium citrate led to the growth of the anodic oxide with the best blocking properties whilst, when Ta is anodized in sodium adipate, a significant part of the circulated charge is wasted in side reactions, such as oxygen evolution. Photoelectrochemical measurements showed the presence of optical transitions at energy lower than the band gap for the anodic films grown in citrate and tartrate electrolytes, attributed to localized electronic states located close to…
Dielectric Properties of Al-Nb Amorphous Mixed Oxides
2013
Submitted by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:53:22Z No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Approved for entry into archive by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:53:42Z (GMT) No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Approved for entry into archive by Paula Candeias (paula.candeias@lneg.pt) on 2014-02-25T11:54:01Z (GMT) No. of bitstreams: 1 ECSJournalSolidStateScienceTechnology_N205.pdf: 205716 bytes, checksum: 7b6ac8703b59f9bc280a9cb4082ee0f2 (MD5) Made available i…
Enhanced photorefractive properties of Bi-doped Sn2P2S6
2008
International audience; Enhanced photorefractive properties of tin hypothiodiphosphate (Sn2P2S6) crystals as a result of Bi doping are presented. These new crystals were obtained by the vapor-transport technique using stoichiometric Sn2P2S6 composition with an additional amount of Bi up to 0.5 mol. % in the initial compound. The bandgap edges of the obtained crystals are located at ~750 nm and shift toward the red wavelengths with increasing Bi concentration. Sn2P2S6:Bi crystals are found to exhibit larger two-beam coupling gain coefficients (up to 17 cm−1 at a wavelength of 854 nm) as compared to (i) pure Sn2P2S6 (2.5 cm−1 at 854 nm), (ii) Sn2P2S6 crystals modified by the growth conditions…
Effects of CuO doping on structure, microstructure and dielectric properties of BaTiO3–PbTiO3 solid solution
2019
Ba0.7Pb0.3TiO3 and Ba0.7Pb0.3TiO3+yCuO (y = 0.1 wt%, 0.5 wt%, 1 wt% and 3 wt%) samples were prepared by a solid state reaction method. High purity raw materials were used. Structural properties of the sintered pellets were studied by X-ray diffractometer X’Pert PRO (PANalytical). A single phase of perovskite structure with tetragonal phase was identified at room temperature. The surface morphology of the obtained specimens was characterized by the scanning electron microscopy (Hitachi S4700). The investigations has shown that the synthesized ceramic materials are characterized by the high density, homogeneity of microstructure and low porosity. Dielectric spectroscopy was used to study the …
Dynamic properties of solvent confined in silica gels studied by broadband dielectric spectroscopy
2007
Abstract We report the results of a broadband (10−2–107 Hz) dielectric spectroscopy study on a solvent system (glycerol–water solution) confined in a porous silica matrix. The dielectric relaxation of the system is studied as a function of both temperature (120–280 K) and solvent composition (0–36 glycerol molar percentage), at constant matrix composition. Our data show that glycerol–water systems confined inside silica gel are characterized by a very complex dynamics quite different from that observed in solution, thus indicating that confinement may deeply modify solvent dynamics. Indeed in addition to the relaxation processes similar to those occurring in bulk samples, new dielectric rel…
Dielectric properties and ac conductivities of Bi1−xSmxFeO3 ceramics
2019
Dielectric permittivity, dielectric losses and ac-conductivity of polycrystalline Bi1−xSmxFeO3 (x = 0; 0.05; 0.1; 0.15; 0.2) are measured in the frequency range 1 kHz–10 MHz and in the temperature range 25–600 °C. Anomalies have been observed at the 200 °C, 300 °C and at the Néel temperature. It has been demonstrated that doping with Sm has enhanced the dielectric properties and increased conduction in the frequency region 1 MHz) and at a certain temperature Tm, depending on the composition Bi1−xSmxFeO3, the conductivity reaches a maximum. The results are discussed with reference to the model of correlated barrier hopping.
BST ceramics: Effect of attrition milling on dielectric properties
2004
Abstract The effect of grain size on the dielectric properties of Ba0.6Sr0.4TiO3 (BST) ceramics is investigated. Attrition milling is chosen to obtain nanometre particle size from micrometre particle size powders. Fine grained ceramics are obtained by hot uniaxial pressing (HUP). Additionally, the present study is focused on the effect of the nature of milling balls on loss tangent and permittivity. For that, three kinds of balls are tested: calcia, yttria or ceria stabilised zirconia balls. The properties of these samples are evaluated in the range of MHz. The balls induce an involuntary doping of powders which modifies the dielectric properties, especially the Curie temperature and loss t…
Dielectric properties and partial discharge endurance of polypropylene-silica nanocomposite
2010
This paper presents the results of the dielectric properties and partial discharge endurance measurements conducted on polypropylene (PP)-silica nanocomposite. The material compounds were analyzed with micro-Raman spectroscopy, X-ray tomography and transmission electron microscopy (TEM). ac and dc breakdown strength of the materials was measured. Dielectric response, capacitance and loss factor of the film samples were measured as a function of temperature and frequency. Partial discharge (PD) endurance of the reference PP and PP Silica nanocomposite was studied as a function of ac voltage. Material surfaces were analyzed after PD stress with optical microscopy. All dielectric measurements …