Search results for "discharge"

Changes of Structure and Physical-Mechanical Properties in Alloy Steels Thermochemically Treated by Plasma Nitriding

2021

Plasma nitriding is a method of surface modification using a glow discharge technology to introduce nitrogen into the surface of a metal, which subsequently diffuses into the material. The main advantages of plasma nitriding over conventional nitriding processes are: reduced cycle time, controlled growth of the surface layer, elimination of white layer, reduced distortion, no need of finishing, pore-free surfaces and mechanical masks instead of copper plating. The process is especially suitable for complex parts that are intensively solicited by wear, fatigue, contact pressure, shocks, possibly also to corrosion. It is applied in order to bring the metallic products in a state favourable fr…

Nanosecond laser surface modification of AISI 304L stainless steel: Influence the beam overlap on pitting corrosion resistance

2014

Abstract Surface modifications of AISI 304L stainless steel by laser surface melting (LSM) were investigated using a nanosecond pulsed laser-fibre doped by ytterbium at different overlaps. The objective was to study the change in the corrosion properties induced by the treatment of the outer-surface of the stainless steel without modification of the bulk material. Different analytical techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and glow discharge optical emission spectrometry (GDOES) were used to characterize the laser-melted surface. The corrosion resistance was evaluated in a chloride solution at room temperature by electrochemical tests. The results sh…

Optical interfaces in GD-OES system for vacuum far ultraviolet detection

2003

A Glow Discharge Optical Emission Spectrometry device has been designed for glove box adaptation in CEA Valduc to analyze carbon, hydrogen, nitrogen and oxygen at low concentration in nuclear materials. Vacuum ultraviolet region of the spectrum (between 120 and 160 nm) was chosen for light elements analysis with the aim to avoid optical interferences with matrix emission lines (20000 lines in the visible region for plutonium element). For this purpose, two different systems of collection have been developed: a first based on two focusing lenses and a second having an optical interface based on mirrors. In the present paper, the whole set-up integrated in a glove box is described. Optical li…

An integrated care pathway for cancer patients with diabetes: A proposal from the Italian experience

2020

Diabetes and cancer frequently coexist in the same subject, often with relevant clinical effects on the management and prognosis of the comorbid patient. The existing guidelines, however, do not appropriately address many clinical issues in this setting. Although collaboration between diabetologists and oncologists should play an important role in achieving appropriate levels of care, close coordination or agreement between these specialists is seldom offered. There is an urgent need for greater interdisciplinary integration between all specialists involved in this setting, for a shared approach ensuring that organisational silos are overcome. To this end, the Italian Associations of Medica…

How to tackle the stringent sulfate removal requirements in mine water treatment-A review of potential methods.

2018

Abstract Sulfate (SO₄²⁻) is a ubiquitous anion in natural waters. It is not considered toxic, but it may be detrimental to freshwater species at elevated concentrations. Mining activities are one significant source of anthropogenic sulfate into natural waters, mainly due to the exposure of sulfide mineral ores to weathering. There are several strategies for mitigating sulfate release, starting from preventing sulfate formation in the first place and ending at several end-of-pipe treatment options. Currently, the most widely used sulfate-removal process is precipitation as gypsum (CaSO₄·2H₂O). However, the lowest reachable concentration is theoretically 1500 mg L⁻¹ SO₄²⁻ due to gypsum’s solu…

Sentieri: mortality, cancer incidence and hospital discharges. Summary

2014

Phenolic and Antioxidant Analysis of Olive Leaves Extracts (Olea europaea L.) Obtained by High Voltage Electrical Discharges (HVED)

2019

Background: The aim of this study was to evaluate high voltage electrical discharges (HVED) as a green technology, in order to establish the effectiveness of phenolic extraction from olive leaves against conventional extraction (CE). HVED parameters included different green solvents (water, ethanol), treatment times (3 and 9 min), gases (nitrogen, argon), and voltages (15, 20, 25 kV). Methods: Phenolic compounds were characterized by ultra-performance liquid chromatography-tandem mass spectrometer (UPLC-MS/MS), while antioxidant potency (total phenolic content and antioxidant capacity) were monitored spectrophotometrically. Data for Near infrared spectroscopy (NIR) spectroscopy, colorimetry…

Atmospheric pressure plasma polymerisation of metalloporphyrins containing mesoporous membranes for gas sensing applications

2013

Abstract Metalloporphyrins are embedded in an organosilicon matrix by an easily up-scalable atmospheric pressure dielectric barrier discharge method. The integrity of the metalloporphyrins, followed by UV–visible spectroscopy, is successfully preserved and their aggregation prevented. The single molecule properties, rather than the bulk ones, are thus enhanced. Exposure to triethylamine, which reaches the metalloporphyrins through the pores of the organosilicon membrane, led to a shift in the absorption spectrum and confirms the gas sensing potential of such coatings.

High-Speed Machines: Typologies, Standards, and Operation under PWM Supply

2018

This paper presents an overview of the most recent state of the art in the field of high-speed electric machines fed through high-frequency converters. This type of systems is rapidly wide spreading in aeronautical and automotive applications, as well as microturbines. Each typology has its own advantages and downsides, which are analytically presented in this paper. Some types of high-speed electric machines require high-frequency voltage supply, highly stressing the dielectric materials of the winding insulation system. For this reason, in high-speed electric drives, premature failure may occur and a reduction of the total system reliability has been observed in the past years. Such issue…

Large-Eddy Simulation e tecnica LS-PIV: lo studio della turbolenza superficiale

2021

Gli avanzamenti tecnologici degli ultimi decenni hanno fatto registrare la rapida diffusione di tecnologie innovative con cui condurre un monitoraggio ambientale più efficiente ed efficace. Nel campo del monitoraggio fluviale sono sempre più utilizzate le tecniche basate sull’elaborazione di immagini, fornendo una valida alternativa alle metodologie tradizionalmente adottate. Le tecniche ottiche restituiscono infatti misure non intrusive, assicurando migliori condizioni di sicurezza per gli operatori. I metodi ottici più utilizzati sono la Large-Scale Particle Image Velocimetry (LS-PIV) [1] e la Large-Scale Particle Tracking Velocimetry (LS-PTV) [2]. Le tecniche LS-PIV e LS-PTV si basano su…