Search results for "eddy current"
showing 10 items of 27 documents
GA-based Off-Line Parameter Estimation of the Induction Motor Model Including Magnetic Saturation and Iron Losses
2020
This paper, starting from recent papers in the scientific literature dealing with Rotating Induction Motor (RIM) dynamic modelling, as a first step, improves its space-vector dynamic model, including both the magnetic saturation and iron losses; The main original aspects of the proposed model are the following: 1) the magnetic saturation of the iron core has been described on the basis of both current versus flux and flux versus current functions, 3) it includes the iron losses, separating them in hysteresis and eddy current ones, 4) it includes the effect of the load on the magnetic saturation. Afterwards, it proposes an off-line technique for the estimation of electrical parameters of thi…
Practical Application of Eddy Currents Generated by Wind
2011
When a conductive material is subjected to time-varying magnetic fluxes, eddy (Foucault) currents are generated in it and magnetic field of opposite polarity as the applied one arises. Due to the internal resistance of the conductive material, the eddy currents will be dissipated into heat (Joule heating). Conventional domestic water heaters utilize gas burners or electric resistance heating elements to heat the water in the tank and substantial part of the energy to use for it is wasted. In this paper the origin of electromagnetic induction heat generated by wind turbine in special heat exchange camera connected to water boiler is discussed and material evaluation performed using mathemati…
Eddy current imaging with an atomic radio-frequency magnetometer
2016
We use a radio-frequency $^{85}$Rb alkali-vapor cell magnetometer based on a paraffin-coated cell with long spin-coherence time and a small, low-inductance driving coil to create highly resolved conductivity maps of different objects. We resolve sub-mm features in conductive objects, we characterize the frequency response of our technique, and by operating at frequencies up to 250 kHz we are able to discriminate between differently conductive materials based on the induced response. The method is suited to cover a wide range of driving frequencies and can potentially be used for detecting non-metallic objects with low DC conductivity.
Nonlinear scaled models in 3D calculation of transformer magnetic circuits
2006
PurposeTo make easier and faster the designing of transformers using scale models.Design/methodology/approachThe scale modeling in designing of transformers is included. Both computer and physical models of high leakage reactance (HLR) and 3‐phase (TP3C) transformers have been considered. The 3D field computations have been executed for the scaled models, and the results were recalculated to the full‐scaled ones.FindingsIt is possible to calculate the scale coefficients for nonlinear models of transformers using finite element method (FEM) software. Obtained coefficients are useful in the designing process. Measurements confirm correctness of the scaling laws.Research limitations/implicatio…
Air gap fringing flux reduction in a high frequency inductor for a solar inverter
2013
In a gapped inductor, air gap fringing flux induces eddy currents in conductors in the vicinity of the air gap producing unwanted power loss and heat in the coil. This paper presents a detailed analysis to evaluate the performance changes of a high frequency inductor used in a solar inverter by new arrangement scheme of the air gap locations. The effect of air gap positioning in the core and the ac-resistance and leakage inductance of the high frequency inductor used in a solar inverter is investigated by using the 2-D finite element analysis. The simulation results show that a significant improvement can be achieved with limited changes in the air gap locations.
Improving the Efficiency of NFC Systems Through Optimizing the Sintered Ferrite Sheet Thickness Selection
2020
The reduction of embedded portable devices involves a magnetic field interference problem when it integrates near field communication (NFC) due to the presence of conductive surfaces, such as ground planes, batteries, or metallic enclosures. Flexible sintered ferrite sheets (FSFS) represent an interesting shielding solution to prevent electromagnetic interferences problems related to NFC, thanks to their ability to control the magnetic flux. The characterization of FSFS effectiveness is analyzed as a function of the sheet thickness in this contribution. This is performed with the aim of determining which is the optimum thickness value to retune an NFC antenna to its original operation frequ…
Eddy-Current Imaging with Nitrogen-Vacancy Centers in Diamond
2018
We demonstrate microwave-free eddy-current imaging using nitrogen-vacancy centers in diamond. By detecting the eddy-current induced magnetic field of conductive samples, we can distinguish between different materials and shapes and identify structural defects. Our technique allows for the discrimination of different materials according to their conductivity. The sensitivity of the measurements is calculated as 8$\times 10 ^{5}$\,S/m\,$\sqrt[]{\textrm{Hz}}$ at 3.5\,MHz, for a cylindrical sample with radius $r_0$\,=\,1\,mm and height $h$\,=\,0.1\,mm (volume $\sim$\,0.3\,mm$^3$), at a distance of 0.5\,mm. In comparison with existing technologies, the diamond-based device exhibits a superior ba…
Rapid nanocrystallization of soft-magnetic amorphous alloys using microwave induction heating
2009
The crystallization of Fe73Nb3Cu1Si16B7 alloy during microwave heating was investigated in situ using synchrotron radiation powder diffraction. The phase transformation comprises a primary nanocrystallization stage and a final microcrystallization step. We provide evidence for a strong enhancement of the transformation kinetics. Microwave heating occurs as a result of both ohmic and magnetic losses induced by eddy currents, which defines a volumetric microwave induction heating process. Nanocrystallization is completed within 5 s, while full crystallization is achieved in less than 10 s.
Design approach for high efficiency NFC systems with magnetic shielding materials
2020
The performance of a Near Field Communication (NFC) antenna may be diminished when it is placed close to any conductive surface such as a metallic case or a battery. This degradation is caused due to the stray magnetic field created by the eddy currents induced on the surface, which is opposite to the intended field generated by the NFC antenna. One of the first solutions that come to mind to designers when facing this problem is the use of high permeability magnetic shielding based on sintered ferrite sheets. This is a good approach but something that is not generally taken into account is that these materials introduce an additional inductance to the NFC antenna. If the permeability of th…
Transmission Attenuation Power Ratio Analysis of Flexible Electromagnetic Absorber Sheets Combined with a Metal Layer.
2018
Electromagnetic noise absorber sheets have become a solution for solving complex electromagnetic interference (EMI) problems due to their high magnetic losses. This contribution is focused on characterizing a novel structure that is based on an absorber film with a metal layer attached on its top side. Two different absorber compositions were combined with Al and Cu metal layers in order to study the improvement on the performance of these structures, depending on the complex permeability, absorber film thickness, and type of metal. The transmission attenuation power ratio of the absorber films is analyzed and compared to the performance of absorber and metal structures. The measurement pro…