Search results for "efficient"
showing 10 items of 1603 documents
Heat transfer and flow resistance for stacked wire gauzes: Experiments and modelling
2012
Abstract The study deals with the flow resistance and heat transport properties of woven and knitted wire gauzes stacked in a tubular apparatus. The experimental programme included flow resistance and heat transfer experiments performed for air flow ( Re = 2–300) using three woven gauzes and one knitted gauze. During the heat transfer experiments, the gauzes were heated by electric current flowing directly through them. The models describing the flow resistance and the heat transfer were put forward. Both the models base on the concept of the laminar flow developing in a short capillary channel (i.e. the gauze mesh). The model describing the flow resistance does not contain the experimenta…
A Constructal Law optimization of a boiler inspired by Life Cycle thinking
2018
Abstract The aim of the paper is to explore how design optimization contributes to a technology's ecological evolution. The article develops this concept through an application of Constructal Law, used to account for the “evolution” of technologies design (configuration, shape, structure, pattern, rhythm), and Life Cycle Assessment (LCA), used for quantifying the environmental impacts of the design choices. The combination of both methods assesses how technology evolution affects the environment during its life, extending the concept of evolution of design. The study is applied to a case study of a real biomass boiler. The study analyses basic case and a series of alternative scenarios opti…
Investigation of the Cooling of Hot Walls by Liquid Water Sprays
1999
An experimental study was conducted for the heat transfer from hot walls to liquid water sprays. Four full cone, swirl spray nozzles were used at different upstream pressures, giving mass fluxes impinging on the wall, G, from 8 to 80 kg m(-2) s(-1), mean droplet velocities, U, from 13 to 28 m s(-1) and mean droplet diameters, D, from 0.4 to 2.2 mm. A target consisting of two slabs of beryllium-copper alloy, each 4 x 5 cm in size and 1.1 mm thick, was electrically heated to about 300 degrees C and then rapidly and symmetrically cooled by water sprays issuing from two identical nozzles. The midplane temperature was measured by a fast response, thin-foil thermocouple and the experimental data …
Local Effects of Longitudinal Heat Conduction in Plate Heat Exchangers
2007
Abstract In a plate heat exchanger, heat transfer from the hot to the cold fluid is a multi-dimensional conjugate problem, in which longitudinal heat conduction (LHC) along the dividing walls often plays some role and can not be neglected. Large-scale , or end-to-end, LHC is always detrimental to the exchanger’s effectiveness. On the contrary, if significant non-uniformities exist in the distribution of either convective heat transfer coefficient, small-scale , or local, LHC may actually enhance the exchanger’s performance by improving the thermal coupling between high heat transfer spots located on the opposite sides of the dividing wall.
The Nukiyama Curve in Water Spray Cooling: its Derivation from Temperature-Time Histories and its Dependence on the Quantities that Characterize Drop…
2007
Abstract Heat transfer from hot aluminium walls to cold water sprays was investigated. The method used was the transient two-side symmetric cooling of a planar aluminium target, previously heated to temperatures of up to 750 K, by twin sprays issuing from full-cone swirl spray nozzles of various gauge. The target’s mid-plane temperature was recorded during the cooling transient by thin-foil K thermocouples and a high-frequency data acquisition system. In order to determine the wall temperature Tw, the wall heat flux q w ″ and the q w ″ - T w heat transfer (Nukiyama) curve, two different approaches were used: the first was based on the solution of an inverse heat conduction problem, the seco…
A study of turbulent heat transfer in curved pipes by numerical simulation
2013
Abstract Turbulent heat transfer in curved pipes was studied by numerical simulation. Two curvatures δ (pipe radius a/curvature radius c) were considered, 0.1 and 0.3; results were also obtained for a straight pipe (δ = 0) for comparison purposes. A tract of pipe 5 diameters in length was chosen as the computational domain and was discretized by finite volume multiblock-structured grids of ∼5.3 × 106 hexahedral cells. Fully developed conditions were assumed; the friction velocity Reynolds number was 500, corresponding to bulk Reynolds numbers between 12 630 and ∼17 350 according to the curvature, while the Prandtl number was 0.86 (representative of saturated liquid water at 58 bar). Simulat…
Investigation of flow and heat transfer in corrugated passages—I. Experimental results
1996
Abstract An experimental and numerical study of flow and heat transfer was conducted for a crossed-corrugated geometry, representative of compact heat exchangers including air preheaters for fossil-fuelled power plant. In this paper, we describe the method of applying thermochromic liquid crystals and true-colour image processing to give local Nusselt number distribution over the surface, and average Nu, both of quantitative reliability; a careful uncertainty analysis is also presented. Typical experimental results for heat transfer and pressure drop are presented and discussed for various geometries and Reynolds numbers, and are compared with literature data. Numerical predictions are disc…
Study on heat transfer coefficients during cooling of PET bottles for food beverages
2015
The heat transfer properties of different cooling systems dealing with Poly-Ethylene-Terephthalate (PET) bottles were investigated. The heat transfer coefficient (Ug) was measured in various fluid dynamic conditions. Cooling media were either air or water. It was shown that heat transfer coefficients are strongly affected by fluid dynamics conditions, and range from 10 W/m2 K to nearly 400 W/m2 K. PET bottle thickness effect on Ug was shown to become relevant under faster fluid dynamics regimes.
Physics of agarose fluid gels: Rheological properties and microstructure
2021
Agarose, a strongly gelling polysaccharide, is a common ingredient used to optimize the viscoelastic properties of a multitude of food products. Through aggregation of double helices via hydrogen bonds while cooling under quiescent conditions it forms firm and brittle gels. However, this behavior can be altered by manipulating the processing conditions viz shear. For example, gelation under shear leads to microgel particles with large surface area, which in turn leads to completely different rheological properties and texture. Such fluid gels are shown to play an important role in texture modification of foods and beverages for dysphagia patients. In this study, different concentration of a…
Simultaneous Flow over and under a Gate
2000
This paper reports the results of an investigation carried out to establish the stage-discharge relationship for a flow simultaneously discharging over and under a sluice or a broad-crested gate. The stage-discharge relationship is deduced by a theoretical analysis, based on the application of the Π-theorem of the dimensional analysis and the incomplete self-similarity theory, coupled with an experimental investigation carried out by using a laboratory flume.