Search results for "electrical drive"
showing 10 items of 20 documents
Efficiency Maximization of Permanent Magnet Synchronous Generators Coupled to Wind Turbines
2007
In this paper a control algorithm for the efficiency improvement of permanent magnet synchronous generators (PMSG), the relative simulations and their results are presented. The proposed algorithm reduces the losses of the generator without affecting its performances. In details, after a description of a dynamic model of the PMSG, which has been modified in order to take into account the iron losses, the basic methodologies to obtain the loss minimization are presented and discussed. Many simulations of a specific PMSG employing the proposed algorithm were carried out and are presented. The results of these simulations show that enhancement of the efficiency up to 3% and more can be reached…
Test cycles for the characterization of electrical drives devoted to wheelchair applications
2003
Today electrical wheelchairs are giving valuable increase of the quality of life of disabled people in developed countries. Despite the increasing diffusion of such an aid tool, specific standards for the characterization of their electric drives are not so developed as those available for urban electric vehicles. This paper presents a proposal for the test characterization of a wheelchair drive by means of test cycles with fixed speed trajectories. To this aim, the method, which is well known in the field of automobiles, has been purposely adapted and the obtained simulation results are satisfactory.
A new high accuracy software based resolver-to-digital converter
2004
Tracking resolver-to-digital conversion (R/D converter or simply RDC) has emerged as one of the most robust method for obtaining high resolution position and angular speed information from resolvers. In this paper a low cost software based RDC is presented. The main features are: high accuracy, simple set up, high reliability and stability and good performances. Some experimental results, showing the capabilities of the proposed system, are presented and discussed. An output signal comparison between the proposed RDC and a commercial encoder is also presented.
Automatic EMI filter design for power electronic converters oriented to high power density
2018
In this paper, a complete computer aided procedure based on the power density concept and aimed at the automatic design of EMI filters for power electronic converters is presented. It is rule-based, and it uses suitable databases built-up by considering information on passive components available from commercial datasheets. The power density constraint is taken into consideration by imposing the minimization of the filter volume and/or weight; nevertheless, the system in which the automatically designed filter is included satisfies the electromagnetic compatibility standards limits. Experimental validations of the proposed procedure are presented for two real case studies, for which the per…
Innovative Computational Approach to Harmonic Mitigation for Seven-level Cascaded H-Bridge Inverters
2020
Low frequency modulation strategies are a good solution to increase the energy conversion efficiency in high power applications. The paper is devoted to presents an innovative way to low order harmonics mitigation for seven-level Cascaded H-Bridge Inverters. In particular, this approach is based on the mitigation of selected harmonics without solve non-linear equations for an extended range of the fundamental amplitude. In fact, in real-Time operation to evaluate the control angles the polynomial equations have been identified. Through circuit simulation analysis in MatLab/PLECS environment, the effectiveness of the harmonic mitigation method has been tested and compared with theoretical re…
An accurate measurement procedure of power losses variations in electrical drives
2020
This paper presents a general procedure for the accurate measurement of power losses variations in electrical drives. More specifically, the paper addresses the issue related to the efficiency comparison of electrical drive controlled with different control algorithms. This procedure is applied to a permanent magnet synchronous motor drive, assessing its power losses by means of two different measurement systems, each one characterized by different accuracy and cost. The comparison between these two systems is carried out for different working conditions in terms of load, speed and magnetization in order to demonstrate that the power losses variations can be accurately measured even with no…
Efficiency Improvement of Inverter-Fed Permanent Magnet Synchronous Motors
2003
In this paper a control algorithm for the efficiency improvement of inverter-fed permanent magnet synchronous motors (PMSMs) is presented. The proposed algorithm allows reducing the losses of the drive without reduction of its dynamic performances. In details, after recalling a dynamic model of the PMSM, which has been purposely modified and that takes into account the iron losses, the basic equations and the constraints to obtain the loss minimization are presented and discussed. Some simulations of a specific PMSM drive employing the proposed algorithm are performed. The results of these simulations show that the dynamic performances are maintained, and enhancement of the efficiency up to…
Design and Validation of a FPGA-Based HIL Simulator for Minimum Losses Control of a PMSM
2021
This work examines the FPGA programmable logic platforms applied to minimum losses control of a Permanent Magnet Synchronous Motor (PMSM), which represents a flexible solution for the implementation of an advanced digital control algorithm, given their intrinsic parallel structure and the capability to be directly reprogrammable in the field. In particular, design and validation of a FPGA-based Hardware-In-the-Loop (HIL) simulator is proposed, by investigating about data format, quantization and discretization effects and other issues arising during the experimental validation of a controller prototype, in order to reduce the embedded software development cycle and test control systems. The…
Improving the speed estimation by load torque estimation in induction motor drives: an MRAS and NUIO approach
2021
This paper proposes the application of the NUIO inside a FOC induction motor drive for the simultaneous estimation of the load torque and the rotor speed. The idea is to estimate at first the speed with the current model in parallel with a reference model developed on the basis of the voltage model of the induction machine. Then, the estimated speed is given as input to a nonlinear unknown input observer (NUIO) to estimate the load torque. This estimation is then used to correct the previous estimation of the speed. Simulation and experimental results confirm the goodness of the method for an extended range of speed and different load torque, and they confirm the reduction of error in trans…
Experimental Implementation of an Enhanced Field Oriented Control Strategy for Induction Motors Using a Low-Cost ATSAM3X8E Microcontroller
2020
This paper presents a low-cost Micro Controller Unit (MCU) implementation of an enhanced Field Oriented Control (FOC) technique that takes into account the non-linearity of the ferromagnetic material. The algorithm is applied to a three-phase 5.5 kW Induction Motor (IM) and experimentally carried out by means of an ATMEL ATSAM3X8E microcontroller. The effectiveness of the enhanced control strategy is verified by comparing the dynamic performances of the electric drive with those obtained by means of a traditional FOC technique. For this purpose, an experimental test bench is set up for the implementation of the enhanced FOC technique. Finally, the technical and economic features of the simp…