Search results for "electrochemical"

Electrochemical conversion of CO2 to HCOOH at tin cathode in a pressurized undivided filter-press cell

2018

Abstract The electrochemical reduction of carbon dioxide to formic acid was performed for the first time in a pressurized filter-press cell with a continuous recirculation of the electrolytic solution (0.9 L) at a tin cathode. It was shown that the performances of the system are comparable or slightly better than that of a batch system with a smaller volume (0.05 L). The selection of proper values of both current density and CO2 pressure allowed to achieve quite high values of faradaic efficiencies. Long-time electrolyses have shown that the system is stable and that it can allow to generate quite high concentrations of HCOOH (about 0.4 M).

Development of an Electrochemical Process for the Simultaneous Treatment of Wastewater and the Conversion of Carbon Dioxide to Higher Value Products

2016

Many researchers have shown that selected anodic processes allow effective treatment of a very large amount of wastewater contaminated by pollutants resistant to biological processes. In the meantime, various authors have also shown that carbon dioxide can be converted into higher value products, such as formic acid or synthesis gas, by cathodic reduction at suitable cathodes. These two processes present interesting economic potential that, however, still needs to be improved for further development at an industrial level. Herein, these two kinds of process are combined in the same cell to improve their economic feasibility. In particular, the anodic treatment of wastewater at a boron-doped…

Front Cover: (Photo)electrocatalytic Versus Heterogeneous Photocatalytic Carbon Dioxide Reduction (ChemPhotoChem 9/2021)

2021

Electrochemically induced free solvent transfer in thin poly(3,4-ethylenedioxythiophene) films

2015

International audience; In dynamic intrinsically conducting films, counterions transfer and conformational movements stimulated by the electrochemical reactions affect the free water molecules transfer. Poly(3,4-ethylenedioxythiophene) or PEDOT is included in this category. Here, p-doping of PEDOT immersed in LiClO4 aqueous solution was explored by ac-electrogravimetry. Electrochemical impedance spectroscopy combined with mass impedance spectroscopy proves useful for species identification and kinetics. For PEDOT, new equations have been developed to analyze the ac -electrogravimetry response. Quantitatively, faster free water transfer and slower coupled View the MathML sourceClO4−/free wat…

Influence of the anion on diffusivity and mobility of ionic liquids composite polybenzimidazol membranes

2020

[EN] The study of proton conductivity processes has received increasing attention in the past decades due to their potential applications in fields such as electrochemical devices and fuel cells. Despite the high number of composite membranes which have been described for this purpose, fundamental studies of the conduction phenomena in polymeric membranes are scarce. In this article, we study on the effect of the anion on ionic conductivity of ionic liquid composite polybenzimidazole (PBI) membranes. These membranes, which contain 1-butyl-3-methylimidazolium (BMIM) with different counterions ([Cl]-, [NCS]-, [NTf2]- and [BF4]-) were analyzed by electrochemical impedance spectroscopy (EIS) in…

Characterizing archaeological bronze corrosion products intersecting electrochemical impedance measurements with voltammetry of immobilized particles

2017

Application of electrochemical impedance measurements to microparticulate deposits of copper corrosion products attached to graphite electrodes in contact with 0.10 M aqueous HClO4 electrolyte is described. The impedance measurements were sensitive to the applied potential and the amount of solid sample and were modeled taking into account the contribution of the uncovered base electrode. Several pairs of circuit elements provide monotonic variations which are able to characterize different corrosion compounds regardless the amount of microparticulate solid on the electrode. Application to a set of archaeological samples from the archaeological Roman site of Gadara (Jordan, 4th century AD) …

Characterization and Electrochemical Properties of Oxygenated Amorphous Carbon (a-C) Films

2016

Amorphous carbon (a-C) films with varying oxygen content were deposited by closed-field unbalanced magnetron sputtering with the aim to understand the effect of oxygen on the structural and physical properties of the films and subsequently correlate these changes with electrochemical properties. The a-C films were characterized by transmission electron microscopy, helium-ion microscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and time-of-flight elastic recoil detection analysis. The electrochemical properties were studied by electrochemical impedance spectroscopy and cyclic voltammetry with several redox systems (Ru(NH3)62+/3+, Fe(CN)64−/3−, dopamine an…

Electrochemical oxidation of organics at metal oxide electrodes: The incineration of oxalic acid at IrO2-Ta2O5 (DSA-O2) anode

2008

Abstract The electrochemical incineration of oxalic acid (OA) at Ti/IrO2–Ta2O5 (DSA-O2) anode was investigated to find the influence of the operative parameters on the performances of the process. Polarization curves and chronoamperometric measurements indicate the probable occurrence of a direct electrochemical oxidation of OA at the surface of the DSA anode. In incineration electrolyses, the performances of the process in terms of OA conversion and current efficiency dramatically depend on the adopted operative conditions. Interestingly, very high OA removal and current efficiency were obtained when the process was performed at relatively high temperatures (50 °C) or in the presence of Na…

Effects of anion size on the electrochemical behavior of H2SO4-structured poly(o-toluidine) films. An ac-electrogravimetry study in acid solutions

2014

International audience; ac -Electrogravimetry has allowed an easy separation of kinetic information to be evaluated for all the transferred species in three different H2SO4-structured poly(o-toluidine) or POT films, View the MathML sourcePOT-NO3−, View the MathML sourcePOT-ClO4− and POT-Cl− films when they are polarized between the pernigraniline (oxidized) and leucoemeraldine (reduced) forms. It is clear that larger anions slow down the electrochemical transitions of POT films, but the effects of anion transfer on hydrated protons and free solvent transfers are affected. For the same polymeric structure of a POT film, the kinetics of all specie transfers have been evaluated considering the…

Application of electrochemical impedance for characterising arrays of Bi2S3 nanowires

2015

Abstract Electrochemical Impedance Spectroscopy (EIS) was used to characterise the electrical properties of bismuth sulphide (Bi2S3) nanowires (NWs) templated within anodic aluminium oxide (AAO) membranes. A specially engineered cell, with a nominal electrolyte volume of 0.1–0.2 ml, was used to hold and measure the electrochemical impedance of the fragile NW/AAO samples. An equivalent circuit model was developed to determine the filling density of nanowires within the porous templates. The EIS method can be utilised to probe the nanowire filling density in porous membranes over large sample areas, which is often unobtainable using electron microscopy and conductive atomic force microscopy t…