Search results for "electron microscopy"
showing 10 items of 706 documents
Memory effects in MOS capacitors with silicon quantum dots
2001
To form crystalline Si dots embedded in SiO2, we have deposited thin films of silicon-rich oxide (SRO) by plasma-enhanced chemical vapor deposition of SiH4 and O2. Then the materials have been annealed in N2 ambient at temperatures between 950°C and 1100°C. Under such processing, the supersaturation of Si in the amorphous SRO film produces the formation of crystalline Si dots embedded in SiO2. The narrow dot size distributions, analyzed by transmission electron microscopy, are characterized by average grain radii and standard deviations down to about 1 nm. The memory functions of such structures has been investigated in MOS capacitors with a SRO film sandwiched between two thin SiO2 layers …
Incremental lines in root cementum of human teeth: an approach to their ultrastructural nature by microscopy.
1998
In ground sections of human teeth, root cementum shows under the light microscope as alternating, almost concentric, dark and light rings. In paleontology and forensic medicine, the number of these incremental lines or annulations is used to derive the age-at-death of the individual. To find the ultrastructural features underlying these cemental annulations, we used bright-field light microscopy (LM), confocal laser scanning microscopy (CLSM), transmission electron microscopy (TEM), and electron-dispersive x-radiation (EDX) in a scanning electron microscope (SEM). Annulations visible in ground sections of about 100-μm thickness were no longer visible in semi-thin sections (thickness, 1-2 μ…
Chemically Selective Imaging of Individual Bonds through Scanning Electron Energy-Loss Spectroscopy: Disulfide Bridges Linking Gold Nanoclusters
2020
As proof-of-principle of chemically selective, spatially resolved imaging of individual bonds, we carry out electron energy-loss spectroscopy in a scanning transmission electron microscopy instrument on atomically precise, thiolate-coated gold nanoclusters linked with 5,5'-bis(mercaptomethyl)-2,2'-bipyridine dithiol ligands. The images allow the identification of bridging disulfide bonds (R-S-S-R) between clusters, and X-ray photoelectron spectra support the finding.
Deposition and characterization of cold sprayed nanocrystalline NiTi
2011
International audience; Binary 50Ni–50Ti mixture was prepared by mechanical alloying from elemental powders. After 48 h of milling, the nanocrystalline B2-NiTi powder was produced. Then, this as-milled powder was deposited by cold spraying in order to produce a target which can be used to create thin films by magnetron sputtering technique. The objective is to improve the electrical characterizations of the NiTi/SiO2/Si M.O.S structures. Themorphology evolution of the powder particles, the phase identification and the alloying evolution process as function of milling time were studied using scanning electron microscopy, X-ray diffraction and transmission electron microscopy. In addition, th…
Morphology and structure of electrospun CoFe2O4/multi-wall carbon nanotubes composite nanofibers
2010
CoFe2O4/multiwall carbon nanotubes (MWCNTs) composite nanofibers were produced by electrospinning a dispersion of MWCNTs in a solution of polyvinylpyrrolidone, iron(III) nitrate nonahydrate, cobalt (II) acetate tetrahydrate, absolute ethanol and H2O. Microstructure was examined by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM). Thermal behaviour was studied by thermogravimetry and differential thermal analysis (TG-DTA) and phase analysis of calcined fibers was performed by X-ray diffraction (XRD). Upon thermal treatment at 450 °C defect-free, randomly oriented composite fibers having a mean diameter of 60 ± 10 nm were obtained. The results s…
Synthesis of bulk FeAl nanostructured materials by HVOF spray forming and Spark Plasma Sintering
2006
Abstract This paper examines the efficiency of two consolidation processing techniques: High Velocity Oxy-Fuel (HVOF) spray forming and Spark Plasma Sintering (SPS) to obtain bulk nanostructured materials from an Y 2 O 3 reinforced Fe–40Al (at.%) milled powder. The microstructures of the sintered end-products were characterized by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) in order to gain new insights in their microstructure formation mechanisms. HVOF spray forming is more effective to retain fine nanograins, in particular within retained unmelted powder particles. The drawbacks of this technique are that it inevitably leads to a high fraction of porosity…
Nanostructured Alumina from Freeze-Dried Precursors
2010
Nanocrystalline alumina has been obtained on the 100 g scale by thermal decomposition of precursors resulting from the freeze-drying of aqueous solutions of different aluminum-containing products, namely aluminum acetate and aluminum L-lactate. Samples prepared at different temperatures (from 873 to 1573 K in steps of 100 K) were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and surface area measurements. In the acetate case, the transformation sequence involves the formation of θ-Al 2 O 3 as an intermediate phase between γ-Al 2 O 3 and α-Al 2 O 3 , whereas this θ phase is not observed in the lactate case. TEM…
Growth, Structure, and Stability of KxWO3 Nanorods on Mica Substrate
2012
International audience; KxWO3 nanorods, interesting as gas sensors, were elaborated on mica muscovite substrate and characterized by atomic force microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, and mainly transmission electron microscopy. A combination of structural analyses allowed determining the morphology of these rods, and selected area electron diffraction experiments pointed out the simultaneous presence of the exotic hexagonal and stable monoclinic phases. Moreover, the presence of potassium inside the nanorods, coming from the mica substrate, was revealed. By combining all the observations, a growth model is proposed, consisting of the stacking of two di…
Spherical silica agglomerates possessing hierarchical porosity prepared by spray drying of MCM-41 and MCM-48 nanospheres
2003
Hierarchically ordered porous materials possessing both meso- and macropores can be obtained by agglomeration of spherical primary particles of mesoporous MCM-41 and MCM-48 materials using the spray drying technique. A highly interconnected bimodal pore network is obtained due to the intra- and inter-particle pore systems within the micron-sized spherical agglomerates. Further packing of the agglomerates will result in a three-modal hierarchical pore system, where the first level of porosity originates from the ordered mesopores inside the primary particles, the second level is a result of the particle internal porosity, and the third level is due to the voids between the agglomerates. The …
Metal nanodumbbells for nanomanipulations and tribological experiments
2015
Nanomanipulation experiments were carried out on nanodumbbells (NDs) to study their kinetic behavior and tribological properties. Ag, Au and Cu NDs were produced by laser-induced melting of corresponding nanowires (NWs). NDs were characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Manipulation experiments were performed first with atomic force microscope (AFM) at ambient conditions, and then inside SEM at high vacuum conditions. Different regimes of motion were observed. In-plane and out-of-substrate-plane rotation were identified as the most preferred motion types of NDs.