Search results for "electron spectroscopy"
showing 10 items of 525 documents
Investigation of structure, stability, phase composition and magnetic ordering in ultrathin iron/nickel films
1995
By thermal and chemical treatment of Langmuir-Blodgett (LB) films, oxidic and metallic Fe and Ni layers can be prepared. The films are characterised, where differences e.g. in the lateral homogeneity are found. The metallic Fe containing samples show a higher corrosion stability as compared with films prepared by other coating techniques. Mixed Fe/Ni oxidic and metallic layers, respectively, are prepared, where the Ni concentration in the oxidic films can be determined as a function of the ratio of initially transferred numbers of LB layers. The phase composition of the metallic Fe changes systematically with the Ni concentration.
Noble metal nanoparticles in organic matrix
2020
Abstract The purpose of this work is the synthesis and study of the properties of nanocomposite structures created by noble metal (silver) nanoparticles (NP's), an exciting class of materials with unique properties differ from both bulk and atomic behavior, which are self-organize in a thin organic film of copper phthalocyanine (CuPc). The structure and morphology of this material, depending on the amount of deposited silver, was studied in ultrahigh vacuum using transmission electron microscopy (TEM) and photoelectron spectroscopy (PES). Metallic atoms deposited on the surface of an organic substrate diffuse into the substrate, forming NPs with a narrow size distribution, which correlates …
Charge transfer effects on the chemical reactivity of PdxCu1−xnanoalloys
2015
This work reports on the synthesis and characterization of PdxCu1-x (x = 0.7, 0.5 and 0.3) nanoalloys obtained via an eco-friendly chemical reduction method based on ascorbic acid and trisodium citrate. The average size of the quasi-spherical nanoparticles (NPs) obtained by this method was about 4 nm, as observed by TEM. The colloids containing different NPs were then supported on carbon in order to produce powder samples (PdxCu1-x/C) whose electronic and structural properties were probed by different techniques. XRD analysis indicated the formation of crystalline PdCu alloys with a nanoscaled crystallite size. Core-level XPS results provided a fingerprint of a charge transfer process betwe…
Organophosphorus pesticides (chlorfenvinphos, phosmet and fenamiphos) photoelectrodegradation by using WO3 nanostructures as photoanode
2021
[EN] The photoelectrocatalytic (PEC) degradation of recalcitrant and toxic organophosphorus pesticides, fenamiphos, chlorfenvinphos and phosmet, has been performed by using an innovative WO3 nanostructure as photoanode. The nanostructure has been synthesized by anodization in acidic media in the presence of a very small amount (0.05 M) of H2O2, and its composition as well as its photoelectrochemical properties have been characterized using X-ray Photoelectron Spectroscopy and X-ray diffraction as composition technique and photoelectrochemical impedance spectroscopy as photoelectrochemical analysis. After 24 h of experiment, a degradation of 95% of chlorfenvinphos, 99.9% of phosmet and 100% …
One-step growth of isolated CdO nanoparticles on r-sapphire substrates by using the spray pyrolysis methodology
2014
In spite of the remarkable properties of CdO, there are only a few reports on CdO nanostructures, especially on isolated NPs. In this paper, we analyze the growth of isolated CdO nanoparticles (NPs) on 0.5° miscut r-sapphire substrates by using the spray pyrolysis methodology in its classical configuration. A systematic study has been performed to optimize the growth parameters such as precursor concentration, growth time, spray rate and growth temperature to obtain CdO NPs (size: 6–10 nm to 35–100 nm depending on the growth conditions). The study shows the control over the size and density of the CdO nanoparticles that can be achieved by adjusting the growth parameters. The CdO nanoparticl…
Bimetallic PdAg nanoparticle arrays from monolayer films of diblock copolymer micelles
2015
MICROSCOPIE+ATARI+EEH:GMA:TBG:NSP:MAO; International audience; The self-assembly technique provides a highly efficient route to generate well-ordered structures on a nanometer scale. In this paper, well-ordered arrays of PdAg alloy nanoparticles on flat substrates with narrow distributions of particle size (6-7 nm) and interparticle spacing (about 60 nm) were synthesized by the block copolymer micelle approach. A home-made PS-b-P4VP diblock copolymer was prepared to obtain a micellar structure in toluene. Pd and Ag salts were then successfully loaded in the micellar core of the PS-b-P4VP copolymer. A self-assembled monolayer of the loaded micelles was obtained by dipping the flat substrate …
Effect of Reaction Parameters on Composition and Morphology of Titanate Nanomaterials
2009
International audience; In the present article, we report the synthesis of titanate nanotubes and nanoribbons with controlled morphology, structure, and chemical composition depending on the main parameters of the synthesis. Hydrothermal processing time, grain size of the precursor, type of agitation, and acid treatment were investigated, and the principal controversies mentioned in the literature such as nanotube crystallographic structure, their chemical composition, and acid treatment impact are discussed. These controversies may be due to the heterogeneities present in all the samples and are rarely considered in the literature. These nanostructures were characterized by Raman spectrosc…
An experimental comparison of the K- and L-Auger electron spectra generated in the decays of 140Nd and 111In
2005
The low-energy electron spectra generated in the decay of 140Nd have been measured using a combined electrostatic spectrometer adjusted to the 4, 7, and 35 eV instrumental resolution. In order to estimate the therapeutic potential of low-energy electrons associated with the decay of 140Nd, similar experiments have been performed with 111In. Relative Auger electron intensity ratios per decay are: 111In(K-Auger)/140Nd(K-Auger)=1.47(12), 111In(L-Auger) /140Nd(L-Auger)=1.1(4), and 111In(L-Auger [2.8-7 keV])/140Nd(L-Auger [2.8-7 keV])=0.24(11). The obtained K-Auger group intensity ratios have been compared with results of calculations. The good agreement found for the experimental and estimated …
Coupling of electrochemical, electrogravimetric and surface analysis techniques to study dithiocarbamate/bronze interactions in chloride media
2018
International audience; Interaction between ammonium pyrrolidinedithiocarbamate (PDTC) and bronze in 30 g L-1 NaCl was investigated at several concentrations between 0.1 and 10 mM by means of various electrochemical and spectroscopic techniques. Electrochemical measurements revealed a fast adsorption process of PDTC on Cu and Pb and the formation of a thick insulating and protective film with a high surface coverage. At high concentrations, PDTC prevents oxides formation. Surface analyses confirm PDTC adsorption on bronze mainly via interaction between sulphur atoms and Cu sites to form Cu I-PDTC complex.
Layer formation on silicon steel by processing in H2/H2O at elevated temperatures
1992
Silicon steel (Fe-3wt%Si), as used for transformers and generators, has been annealed in wet hydrogen at elevated temperatures. The composition, sequence, and thicknesses of the layers found by conversion electron Mossbauer spectroscopy (CEMS) and Auger electron spectroscopy (AES) depth profiling for a 10 minutes anneal in different atmospheres are reported. In the range from 500°C to 720°C we observed carbide formation, indicating that the decarburization is hindered. Above 800°C, the layers consist of fayalite or of fayalite and iron oxides, depending on the oxygen potentialaO. At 843°C, the onset of iron oxide formation was found ataO=0.33.