Search results for "electronics"
showing 10 items of 4340 documents
Design, Synthesis, and Use of Y-Shaped ATRP/NMP Surface Tethered Initiator.
2015
Heterogeneous polymer brushes on surfaces can be easily formed from a binary initiator on a silicon oxide substrate where two different types of polymers can be grown side-by-side. Herein, we designed a new Y-shaped binary initiator using straightforward chemistry for “grafting from” polymer brushes. This initiator synthesis takes advantage of the Passerini reaction, a multicomponent reaction combining two initiator sites and one surface linking site. This Y-shaped binary initiator can be synthesized in three steps with a higher yield than other similar initiators reported in the literature, and can be performed on a multigram scale. We were able to attach the initiator to a silicon oxide s…
Side-chain conjugated polymers for use in the active layers of hybrid semiconducting polymer/quantum dot light emitting diodes
2016
Three monomers, M1–M3, with modified carbazole cores and styrene functionality were prepared for use in the active layers of hybrid polymer/quantum dot light emitting diodes. Utilizing reversible addition fragmentation chain transfer polymerization, side-chain conjugated polymers, P1–P3, with narrow polydispersities and disulfide end groups were obtained. The thermal, optical, and electrochemical properties of the polymers varied depending on the substituents of the carbazole cores. Through the disulfide end groups the polymers were chemically blended with quantum dots to obtain QD/polymer hybrids, which were further used as active layers in light emitting diodes. The fabricated devices ret…
Switching of Polymer Brushes
1999
Polymer coatings of brushlike monolayers composed of two different polymers, polystyrene and poly(2-vinylpyridine), are grafted by radical polymerization on the surface of silicon wafers. Thickness, grafting density, molecular weight of grafted chains, and the composition of the coatings were regulated by grafting time, monomer concentration, and additional initiator in solution. A typical dry film thickness is between 10 and 100 nm, and the molecular weights of the components range from 100 to 300 kg/mol. The fabricated coatings turn out to be sensitive to the composition of the environment. For instance after exposition to toluene the layer becomes hydrophobic and the top of the layer is …
Magneto-Transport Results in SAM Based MTJs
2015
This chapter is dedicated to the description of the magneto-transport results obtained in LSMO/SAM/Co magnetic tunnel nanojunctions fabricated by nanoindentation lithography technique. We started by focusing on the study of LSMO/C12P/Co MTJs. This because C12P is a medium size alkyl chain: long enough to avoid short-circuits in the junction but short enough to give a device resistance in the order of few tens of MO and thus easier to measure. Next, we started to tune the molecule thickness from C10P to C18P (from 10 carbon atoms in the alkyl chain to 18). This allowed on one hand to validate our system by comparing the exponential increase of the junction resistance to the one reported in t…
Fully Vacuum-Processed Wide Band Gap Mixed-Halide Perovskite Solar Cells
2017
Methylammonium lead mixed-halide perovskites MAPb(BrxI1–x)3 are promising materials for the preparation of tandem devices. When exposed to light, MAPb(BrxI1–x)3 segregates in iodide- and bromide-rich phases, limiting the achievable photovoltage and hence the attainable device efficiency. To date only solution-processed mixed-halide perovskites have been demonstrated. We present fully vacuum-deposited mixed-halide perovskite thin films with band gap of 1.72 and 1.87 eV, prepared by controlling the deposition rates of the different halide precursors. When used in thin-film devices, these materials lead to power conversion efficiencies of 15.9 and 10.5%, respectively, which are among the highe…
Combined thermal evaporated and solution processed organic light emitting diodes
2011
Abstract Highly efficient, partly solution processed phosphorescent red, green and white organic light emitting diodes with small molecular weight host materials are prepared from commercially available starting compounds. Starting from an evaporated reference device, layers are stepwise replaced by solution processed layers. Replacing the evaporated hole transport layer by a solution processed polymer interlayer does not affect the performance and allows spincoating of the emissive layer after annealing of the polymer. Devices with, next to the spincoated hole injection and transport layer, a solution processed emission layer show similar characteristics and efficiencies as the reference d…
A new cross-linkable 9,10-diphenylanthracene derivative as a wide bandgap host for solution-processed organic light-emitting diodes
2018
Efficient organic light-emitting diodes (OLEDs) can be obtained using multilayered architectures where the processes of charge injection, transport and recombination are separated and optimized in each layer. Processing these structures from solution requires strategies to avoid redissolution or damage of the previously deposited layers. Several reports have demonstrated the development of cross-linkable hole transport materials, while less literature describes the synthesis and applications of such wide bandgap host materials for multilayered OLEDs. In this work we introduce a cross-linkable derivative of 9-(4-(10-phenylanthracene-9-yl)phenyl)-9H-carbazole incorporating styrene moieties (S…
Ionic iridium complex and conjugated polymer used to solution-process a bilayer white light-emitting diode.
2013
Bilayer white light-emitting devices are prepared from solution, using an ionic orange phosphorescent organometallic complex and a neutral fluorescent conjugated polymer. Because of the very different polarity of the two components, they dissolve in orthogonal solvents, allowing for the direct deposition of the blue emitter on top of the orange emitter without the need of cross-linking or special coating methodology. Fine tuning of the layer thickness of both light-emitting layers allows for the color tuning of different types of white light.
Effect of conductivity of hole injection layer on the performance of a blue light emitting solution processable OLED
2005
The performance of blue emitting OLED devices, using a polyspiro as blue light emitting polymer, were studied as a function of the conductivity of a novel hybrid hole injection material. The hole injection material is based on a polyarylamine using a molecular magnet as oxidant. The charge density and the luminance of the devices changed considerably with increasing conductivity of the hole injection layer. The change in device performance can be attributed to a change from a hole limited device to a balanced charge carrier device and eventually to an electron limited device. The performance of the optimized device configuration is significantly improved with respect to a device making use …
3D defect engineering in polymer opals
2006
The possibility to create defined structures inside a synthetic opal is a key step towards applications in optics, where control of the propagation of light inside a photonic crystal is necessary. Here we report different methods for realizing defined embedded defects in opaline structures. Monodisperse colloids are synthesized by surfactant free emulsion polymerization of the acid labile monomer t-butyl-methacrylate (tBMA). The PtBMA colloids can be filled with sensitizer and photo acid generator and it is possible to crystallize them into photosensitive polymer opals. One method for the introduction of defects is a multilayer build-up of photo-labile (filled with photo acid generator) and…