Search results for "energy conversion efficiency"
showing 10 items of 102 documents
Synthesis and photovoltaic performance of the porphyrin based sensitizers with 2H-[1,2,3]triazolo[4,5-c]pyridine and benzotriazole as auxiliary accep…
2017
Abstract Two novel zinc porphyrin dyes containing either benzotriazole or 2 H -[1,2,3]triazolo[4,5- c ]pyridine as auxiliary acceptors, respectively, were synthesized for dye-sensitized solar cells. These two auxiliary acceptors were firstly applied into porphyrin based dyes. The photophysical and electrochemical properties of the dyes were investigated. These two dyes show the whole visible light absorption when they are adsorbed on the TiO 2 film, which means that they are promising sensitizers for dye-sensitized solar cells. The absorption intensity of the triazolopyridine containing dye is higher than that of the benzotriazole containing dye, resulting in a better light harvesting. Thus…
Dynamic preparation of TiO2 films for fabrication of dye-sensitized solar cells
2006
Preparation of nanocrystalline porous titanium dioxide (TiO2) films with roll-to-roll compatible methods was studied. Gravure printing was used for spreading TiO2 paste and paper calendering for pressing TiO2 nanoparticle films. Influence of different preparation methods on performance of fabricated dye-sensitized solar cells (DSSCs) was investigated. The attained light into electricity conversion efficiency was compared with DSSCs fabricated on conductive plastic substrates by doctor-blading spreading with subsequent static pressing. The latter method achieved a light conversion efficiency as high as 5.1%. The efficiency of the cells with a gravure printed TiO2 film was found to be rather …
Perovskite CH3NH3PbI3–XClx Solar Cells. Experimental Study of Initial Degradation Kinetics and Fill Factor Spectral Dependence
2021
The main drawback of the methylammonium lead halide perovskite solar cells is their degradation in ambient atmosphere. To investigate ambient-air-induced cell degradation, spec-tral dependencies of open-circuit voltage (VOC), fill factor (FF) and the power conversion effi-ciency (PCE) have been acquired (for the first time reported in literature). Our custom-made measurement system allowed us to perform measurements of the above-mentioned entities in situ directly in vacuum during and after thermal deposition of the elec-trode. We also studied how these parameters in vacuum changed after cell exposure to ambient air for 85 min (50 nm top electrode) and for 180 min (100 nm top Ag electrode).…
Electro-optical characterization of ruthenium-based dye sensitized solar cells: A study of light soaking, ageing and temperature effects
2017
Abstract In this work, we report on the electro-optical characterization of Dye Sensitized Solar Cells (DSSCs) which use ruthenium complexes as sensitizers. In particular, several kinds of measurements have been performed to study the electrical performances and the efficiency levels of the cells at different operating conditions. In detail, the measurements have been conducted at varying temperatures and hours of light soaking. Our results show that the short circuit current density J SC , the open circuit voltage V OC and the conversion efficiency η increase with the hours of light soaking, while they decrease with temperature. A thorough investigation on the light soaking process at the …
Organic Dye Bearing Asymmetric Double Donor-π-Acceptor Chains for Dye-Sensitized Solar Cells
2011
A novel efficient metal free sensitizer containing asymmetric double donor-π-acceptor chains (DC) was synthesized for dye-sensitized solar cells (DSSCs). Comparing to 3.80%, 4.40% and 4.64% for the DSSCs based on the dyes with single chain (SC1, SC2) and cosensitizers (SC1 + SC2), the overall conversion efficiency reaches 6.06% for DC-sensitized solar cells as a result of its longer electron lifetime and higher incident monochromatic photon-to-current conversion efficiency.
Azatruxene‐Based, Dumbbell‐Shaped, Donor–π‐Bridge–Donor Hole‐Transporting Materials for Perovskite Solar Cells
2020
Three novel donor-π-bridge-donor (D-π-D) hole-transporting materials (HTMs) featuring triazatruxene electron-donating units bridged by different 3,4-ethylenedioxythiophene (EDOT) π-conjugated linkers have been synthesized, characterized, and implemented in mesoporous perovskite solar cells (PSCs). The optoelectronic properties of the new dumbbell-shaped derivatives (DTTXs) are highly influenced by the chemical structure of the EDOT-based linker. Red-shifted absorption and emission and a stronger donor ability were observed in passing from DTTX-1 to DTTX-2 due to the extended π-conjugation. DTTX-3 featured an intramolecular charge transfer between the external triazatruxene units and the azo…
Synthesis and characterization of zinc carboxy–porphyrin complexes for dye sensitized solar cells
2018
Two zinc porphyrins, 2 and 8, have been synthesized. Porphyrin 8 displays better electronic communication between the dye and the TiO2 electrode. Photophysical measurements and electrochemistry experiments suggest that both porphyrins are very promising sensitizers for dye-sensitized solar cells (DSSCs). It was found that their molecular orbital energy levels favor electron injection and dye regeneration in DSSCs. Solar cells sensitized by 2 and 8 were fabricated, and it was found that they show power conversion efficiencies (PCEs) of 5.27% and 7.13%, respectively. Photovoltaic measurements (J–V curves) together with the incident photon-to-electron conversion efficiency spectra of the two c…
Online optimization of a multi-conversion-level DC home microgrid for system efficiency enhancement
2017
In this paper, an on-line management system for the optimal efficiency operation of a multi-bus DC home distribution system is proposed. The operation of the system is discussed with reference to a distribution system with two conversion stages and three voltage levels. In each of the conversion stages, three paralleled DC/DC converters are implemented. A Genetic Algorithm performs the on-line optimization of the DC network’s global efficiency, generating the optimal current sharing ratios of the concurrent power converters. The overall DC/DC conversion system including the optimization section is modelled using MATLAB/Simulink. Thanks to the implemented online algorithm, considering …
On the Efficacy of PCM to Shave Peak Temperature of Crystalline Photovoltaic Panels: An FDM Model and Field Validation
2013
The exploitation of renewable energy sources and specifically photovoltaic (PV) devices have been showing significant growth; however, for a more effective development of this technology it is essential to have higher energy conversion performances. PV producers often declare a higher efficiency respect to real conditions and this deviation is mainly due to the difference between nominal and real temperature conditions of the PV. In order to improve the solar cell energy conversion efficiency many authors have proposed a methodology to keep the temperature of a PV system lower: a modified crystalline PV system built with a normal PV panel coupled with a Phase Change Material (PCM) heat stor…
Finite difference thermal model of a latent heat storage system coupled with a photovoltaic device: Description and experimental validation
2014
Abstract The use of photovoltaic (PV) systems has been showing a significant growth trend but for a more effective development of this technology it is essential to have higher energy conversion performances. Producers of PV often declare an higher efficiency respect to real conditions and this deviation is mainly due to the difference between nominal and real temperature conditions of the PV. To improve the solar cell energy conversion efficiency many authors have proposed a methodology to keep lower the temperature of a PV system: a modified PV system built with a normal PV panel coupled with a Phase Change Material (PCM) heat storage device. In this paper is described a thermal model ana…