Search results for "engineering.material"
showing 10 items of 2352 documents
Physical and Chemical Principles of Obtaining Thermally Resistant Containers for Treatment of High Purity Niobium and Tantalum Compounds
2011
Mathematical modelling of the distribution of strain in layered quartz ceramics with protective coating of niobium (tantalum) pentoxide from two sides is reported. It is found that fragmentation of the basic layer (decreasing the area of the continuous boarder between layers) and smoothing of sharp edges of the base fragments should reduce the strains on the boundary between the substrate and coating and, correspondingly, enhance the thermal resistance of the samples. Treatment of the niobium pentoxide coating by concentrated light induces a network of fractal micro- and nano-size fractures that compensates the difference of thermal expansion between the layers.
Mechanical Behaviour of a Green Sandwich Made of Flax Reinforced Polymer Facings and Cork Core
2015
Abstract This work investigates the flexural behavior of a composite sandwich made of flax fibers reinforced skin facings and an agglomerated cork core, to be employed as an eco-friendly solution for the making of structural components of small sailing boats. An experimental mechanical characterization of the strength and stiffness flexural behavior of the proposed sandwich is carried out, providing a comparison of performances from three implemented assembling techniques: hand-lay-up, vacuum bagging and resin infusion. Sandwich beams have been tested under three point bending (TPB) at various span lengths. A procedure is also proposed and implemented to consider the potential influence of …
Development of two-color resonance ionization scheme for Th using an automated wide-range tunable Ti:sapphire laser system
2018
Two-color resonance ionization schemes of Th were investigated by an automated wide-range tunable, grating-assisted Ti:Sa laser system with intracavity SHG option. A two-color ionization scheme via autoionizing state (1st step: 372.049 nm and 2nd step: 401.031 nm) was developed and its relative efficiency was lower by factor of three compared to a known three color scheme. peerReviewed
Novel silver-based nanoclay as an antimicrobial in polylactic acid food packaging coatings.
2010
This paper presents a comprehensive performance study of polylactic acid (PLA) biocomposites, obtained by solvent casting, containing a novel silver-based antimicrobial layered silicate additive for use in active food packaging applications. The silver-based nanoclay showed strong antimicrobial activity against Gram-negative Salmonella spp. Despite the fact that no exfoliation of the silver-based nanoclay in PLA was observed, as suggested by transmission electron microscopy (TEM) and wide angle X-ray scattering (WAXS) experiments, the additive dispersed nicely throughout the PLA matrix to a nanoscale, yielding nanobiocomposites. The films were highly transparent with enhanced water barrier …
Enzymatic Synthesis and Surface Deposition of Tin Dioxide using Silicatein-α
2011
Nanostructured tin dioxide was synthesized by making use of the catalytic activity of silicatein-α. TEM, HRTEM, and XRD revealed the formation of cassiterite SnO2. Surface bound silicatein retains its biocatalytic activity. This was demonstrated by immobilizing silicatein on glass surfaces using a histidine-tag chelating anchor. The subsequent deposition of SnO2 on glass was monitored by quartz crystal microbalance (QCM) measurements and scanning electron microscopy (SEM). This new aspect of silicatein activity toward the formation of metal oxides other than SiO2, TiO2, and BaTiO3 opens up new vistas in composite material synthesis.
Friction and wear of lubricated M3 Class 2 sintered high speed steel with and without TiC and MnS additives
2005
Abstract M3/2 sintered high speed steel and composite materials processed by initial admixing of 5 wt.% TiC (to decrease wear) and 5 wt.% MnS (to minimise friction) powders, singly and in combination, were assessed in pin-on-disc tribometers specially constructed to simulate use in the automotive valve train. Pins were of the sintered materials and the mating tribological material discs of T1 high speed steel. For comparison with existing conventional materials, identical tests were performed with discs and pins of two types of spheroidal cast iron. Testing at ∼110 °C, employing a few drops of fresh Shell Helix Standard SAE: 15W-40, API: SJ/CF oil, in daily segments of 5000 m of sliding dis…
Laser Ultrasonic Testing for Estimation of Adhesion of Al2O3Plasma Sprayed Coatings
2001
Abstract The aim of the present study was to investigate the possibility of using a laser ultrasonic technique for the estimation of the adhesion of ceramic coatings, deposited onto metallic substrates by thermal spraying techniques. For this purpose, a pulsed Nd : YAG laser (λ = 1064 nm, 14 ns) was used to irradiate Al2O3 coatings, of different thickness (30–350 µm), deposited onto stainless steel substrates by atmospheric plasma spraying. The laser generated ultrasonic waves were in situ recorded at the epicentre using a laser heterodyne interferometer. The acoustic waveforms were correlated with the interaction between the pulsed laser radiation and the coated metal, taking into account …
Temperature control during Spark Plasma Sintering and application to up-scaling and complex shaping
2013
International audience; The determination and the homogeneity of the sample temperature during consolidation of powders by Spark Plasma Sintering (SPS) are addressed. Densifications were carried out in three different facilities differing by their constructors and their size. A structural transformation activated in a TiAl alloy was used as a marker of the sample temperature and finite element modeling were performed to evaluate the temperature at each point of the set-up. A good agreement between experimental and simulated data is exhibited. Alloys with identical microstructures were sintered and the homogeneity of the microstructure was better in the largest machines or when the sample wa…
Graphene and graphene oxide on Ir(111) are transparent to wetting but not to icing
2021
Anti-icing coatings reduce the freezing onset temperature for water by changing the chemical and physical environment at the water-substrate interface to prevent ice nucleation and growth. Graphene oxide has several attributes that make it attractive as an anti-icing coating and it has been theoretically predicted that graphene oxide has a lower freezing onset temperature than pristine graphene. Here, we test this hypothesis using carefully prepared, well-characterized graphene oxide substrates. We compare the water contact angle for graphene and graphene oxide coatings, both prepared on iridium(111) surfaces. The results show both materials to be transparent to wetting, but indicate a lowe…
Vertical misfit of laser-sintered and vacuum-cast implant-supported crown copings luted with definitive and temporary luting agents
2012
Objectives. This study aimed to evaluate the vertical discrepancy of implant-supported crown structures constructed with vacuum-casting and Direct Metal Laser Sintering (DMLS) technologies, and luted with different cement types. Study Design. Crown copings were fabricated using: (1) direct metal laser sintered Co-Cr (LS); (2) vacuum-cast Co-Cr (CC); and (3) vacuum-cast Ti (CT). Frameworks were luted onto machined implant abutments under constant seating pressure. Each alloy group was randomly divided into 5 subgroups (n = 10 each) according to the cement system utilized: Subgroup 1 (KC) used resin-modified glass-ionomer Ketac Cem Plus; Subgroup 2 (PF) used Panavia F 2.0 dual-cure resin ceme…