Search results for "engineering.material"
showing 10 items of 2352 documents
Structure and performance properties of environmentally-friendly biocomposites based on poly(ɛ-caprolactone) modified with copper slag and shale dril…
2018
The potential application of two types of industrial wastes, drill cuttings (DC) and copper slag (CS), as silica-rich modifiers of poly(ɛ-caprolactone) (PCL) was investigated. Chemical structure and physical properties of DC and CS fillers were characterized using X-ray diffractometer, X-ray fluorescence spectroscopy, particle size and density measurements. PCL/DC and PCL/CS composites with a variable content of filler (5 to 50 parts by weight) were prepared by melt compounding in an internal mixer. It was observed that lower particle size of DC filler enhanced processing of biocomposites comparing to CS filler. Smaller particles of DC filler and thus the higher specific surface area, enabl…
Nanocrystalline ZnCO3—A novel sorbent for low-temperature removal of H2S
2013
Abstract The reactivity of a nanocrystalline ZnCO 3 toward H 2 S (0.2 vol% in N 2 /H 2 mixture) at 140–180 °C was characterized by thermal gravimetric analysis and by breakthrough curves measurements. We have found that under used conditions transformation of ZnCO 3 into ZnS is complete and the rate determining step of the sulfidation is the surface reaction. Such behavior is in strike contrast with that of ZnO whose sulfidation is severely limited by diffusion. The higher reactivity of ZnCO 3 in comparison with ZnO is attributed to the different microstructure of ZnS layer formed in these materials after a partial sulfidation. As in ZnO–ZnS transformation the molar volume increases (from 1…
Ecocompatible Halloysite/Cucurbit[8]uril Hybrid as Efficient Nanosponge for Pollutants Removal
2016
Hybrid materials based on halloysite nanotubes (HNT) and cucurbit[8]uril (CB[8]) were prepared with the aim to obtain efficient nanosponges towards hydrocarbons both in liquid and vapor phases. The loading on both HNT surfaces and the hybrid morphology were evidenced by FTIR spectroscopy, thermogravimetric analysis and scanning electron microscopy. In order to highlight the interactions in the hybrid 13C {1H} CP-MAS NMR experiments were performed. The aqueous colloidal stability of HNT/CB[8] was highlighted through ζ potential and dynamic light scattering measurements. The HNT/CB[8] composite was employed as nanosponge to capture aromatic oils in aqueous phase as evidenced by fluorescence e…
One step grafting of monomethoxy poly(ethylenglycol) during synthesis of maghemite nanoparticles in aqueous medium
2008
Abstract Grafting of silanated monomethoxy poly(ethylene glycol) (m-PEG) onto maghemite nanoparticles surface in aqueous medium through one step procedure was investigated. The major characteristic of this work is that the grafting of m-PEG was produced during the synthesis of maghemite nanoparticles. The maghemite nanoparticles were characterized by photon correlation spectroscopy (PCS), zeta potential measurement, X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The spinel structure of maghemite nanoparticles was verified and successful grafting of m-PEG was evid…
Pharmaceutical properties of supramolecular assembly of co-loaded cardanol/triazole-halloysite systems
2015
Halloysite nanotubes were explored as drug carrier for cardanol, which is considered as a promising natural anticancer active species. To this aim, besides the pristine nanoclay, a chemical modification of the nanocarrier was performed by attaching triazolium salts with different hydrophobicity at the outer surface of the hollow nanotubes. The interaction between cardanol and nanotubes was highlighted in solution by HPLC. This method proved the loading of the drug into the nanotubes. The solid dried complexes formed by pristine and modified halloysite with the cardanol were characterized by IR spectroscopy, thermogravimetric analysis as well as water contact angle to evidence the structure,…
Lifetime predictions of non-ionic and ionic biopolymers: kinetic studies by non-isothermal thermogravimetric analysis
2021
AbstractIn this paper, films based on sustainable polymers with variable charge have been investigated by non-isothermal thermogravimetry in order to predict their lifetime, which is a key parameter for their potential use in numerous technological and biomedical applications. Specifically, chitosan has been selected as positively charged biopolymer, while alginate has been chosen as negatively charged biopolymer. Among non-ionic polymers, methylcellulose has been investigated. Thermogravimetric measurements at variable heating rates (5, 10, 15 and 20 °C min−1) have been performed for all the polymers to study their degradation kinetics by using isoconversional procedures combined with ‘Mas…
Alkoxide-intercalated NiFe-layered double hydroxides magnetic nanosheets as efficient water oxidation electrocatalysts
2016
Alkoxide-intercalated NiFe-layered double hydroxides were synthesized via the nonaqueous methanolic route. These nanoplatelets exhibit high crystalline quality as demonstrated by atomic resolution scanning transmission electron microscopy combined with electron energy-loss spectroscopy. Moreover, the presence of the alkoxide moieties has been unambiguously demonstrated by means of thermogravimetric analysis coupled to a mass spectrometer. These NiFe-LDHs can be exfoliated in water or organic solvents and processed into homogeneous ultra-thin films (< 3nm thick) with the assistance of O2-plasma. The study of their behaviour as water oxidation electrocatalysts has shown an outstanding perf…
Radiation curing of diacrylate glycerolate of bisphenol-A in the presence of an organically modified montmorillonite for the production of flame-resi…
2006
Polymerization of an acrylate derivative of bisphenol-A by ionizing radiation in the presence of an organically modified montmorillonite was carried out in order to produce a flame-retardant composite. The measurement of the thermal effect during irradiation indicates that radiation curing of pure resin and resin-clay mixtures occurred in both cases. Moreover, differential scanning calorimetry and dynamic mechanical thermal analysis showed that a curing completion can be obtained by thermal curing after irradiation with a significant increase of the glass transition temperature. The morphology was investigated by X-ray diffraction and transmission electron microscopy. These have indicated t…
Precursor Polymers for the Carbon Coating of Au@ZnO Multipods for Application as Active Material in Lithium-Ion Batteries
2014
The synthesis of statistical and block copolymers based on polyacrylonitrile, as a source for carbonaceous materials, and thiol-containing repeating units as inorganic nanoparticle anchoring groups is reported. These polymers are used to coat Au@ZnO multipod heteroparticles with polymer brushes. IR spectroscopy and transmission electron microscopy prove the successful binding of the polymer onto the inorganic nanostructures. Thermogravimetric analysis is applied to compare the binding ability of the block and statistical copolymers. Subsequently, the polymer coating is transformed into a carbonaceous (partially graphitic) coating by pyrolysis. The obtained carbon coating is characterized by…
Nanocomposites based on esterified colophony and halloysite clay nanotubes as consolidants for waterlogged archaeological woods
2017
We have designed an innovative protocol for the consolidation of waterlogged archaeological woods by using acetone mixtures of halloysite clay nanotubes and a chemically modified colophony (Rosin). Firstly, we have investigated the thermal properties of HNTs/Rosin nanocomposites, which have been prepared by means of the casting method from acetone. The HNTs content have been systematically changed in order to study the influence of the inorganic filler on the thermal stability and glass transition process of Rosin. We have observed that the thermal properties of the hybrids are affected by the specific HNTs/Rosin interactions. Then, acetone dispersions of HNTs/Rosin composites at variable f…