Search results for "engineering.material"
showing 10 items of 2352 documents
Organic chlorine compounds in lake sediments. II Organically bound chlorine
1990
Abstract Organically bound chlorine together with inorganic chloride was measured from dated bottom sediment layers of 18 lakes in Central Finland and compared to organic matter contents. Pulp mills were found to be the source of significant increase of the accumulation of all of these materials in the 20th century.
Rheological Behaviour, Mechanical Properties and Processability of Biodegradable Polymer Systems for Film Blowing
2017
Films for agricultural or packaging applications are typically made of low density polyethylene (LDPE). They are produced through the film blowing process, which requires the use of polymers with suitable rheological properties. Furthermore, the short shelf-life which is often related to many packed products leads to huge amounts of plastic-based wastes. This suggests the use of biodegradable and/or compostable polymers in replacement for traditional ones. To this regard, only few data exist on the rheological properties of biodegradable polymers undergoing film blowing processing. In this work, a detailed investigation on the rheological, mechanical and processability behaviour of some bio…
Rheological Behavior Under Shear and Non-Isothermal Elongational Flow of Biodegradable Polymers for Foam Extrusion
2013
The production of many items, in particular for food packaging applications, is based on foam extrusion and thermoforming. These operations require the use of polymers which can grant some specific rheological properties, both under shear and elongational flow. In this work, the behavior of some biodegradable polymers [Mater-Bi® and poly(lactic acid)] under shear and non-isothermal elongational flow was investigated and compared with a traditional, non-biodegradable polymer, in order to assess their suitability for industrial-scale foam extrusion and thermoforming. The rheological characterization evidenced the differences between the different biodegradable polymers and the reference polys…
Interactions Between Blood Proteins and Nanoparticles Investigated Using Molecular Dynamics Simulations
2019
In the development of new therapeutic agents based on nanoparticles it is of fundamental importance understanding how these substances interact with the underlying biological milieu. Our research is focussed on simulating in silico these interactions using accurate atomistic models, and gather from these information general pictures and simplified models of the underlying phenomena. Here we report results about the interactions of blood proteins with promising hydrophilic polymers used for the coating of therapeutic nanoparticles, about the salt dependent behavior of one of these polymers (poly-(ethylene glycol)) and about the interactions of blood proteins with silica, one of the most used…
Maghemite polymer nanocomposites with modulated magnetic properties
2007
A method is presented for the production of maghemite polymer nanocomposites with modulated magnetic properties. Magnetic nanocomposites prepared using this method show regular variation in the magnetic blocking temperature from 2 K to 300 K, and variation in the saturation magnetization from 0 to 50 emu g � 1 (Fe2O3). The method is based on the in situ formation of maghemite nanoparticles in nitrogen-base polymer matrixes. The particle size can be varied regularly from 1.5 nm to 16 nm by changing the ratio of iron loading in the polymer and/or the Fe(II)/Fe(III) ratios. The particles are isolated and uniformly distributed within the matrix. The mate
Adsorption of chlorinated volatile organic compounds on hydrophobic faujasite: correlation between the thermodynamic and kinetic properties and the p…
1998
This work deals with a thermodynamic and kinetic study of the adsorption of single volatile organic compounds (VOCs) (dichloromethane (DCM), 1,2-dichloroethane (DCA), trichloroethene (TCE) and tetrachloroethene (PCE)) on a dealuminated faujasite Y by simultaneous measurements of the adsorbed amounts, adsorption heats and diffusivities. The type V isotherms and the weak values of derivative enthalpies allowed us to predict that the competitive adsorption of their mixture would be similar to a distillation. This prediction was verified experimentally: the breakthrough curves of VOC mixtures showed that the adsorbate with the higher boiling point displaced the adsorbate with the lower boiling …
Progress in Understanding of the Interactions between Functionalized Polyolefins and Organo-Layered Double Hydroxides
2013
The dispersion of organo-layered double hydroxides (O-LDH) in functionalized polyolefins (POs) is investigated. Two different polyethylene matrices (maleic anhydride (MAH) and diethyl maleate functionalized) are tested and a hydrogenated fatty acid modified LDH is used. The attention is focused on evidencing the interaction between the functional groups of the polymer and the O-LDH through FT-IR. Moreover, a combination of solvent fractionation, morphological, and rheological characterizations enables to gain a deeper insight into the structure of these composites. In particular, the formation of bridging bonds between the particles and MAH functionalized macromolecules is assumed, possibly…
The surface modification of polymers to modulate endothelial cell growth
1996
The effect of nitrogen ion implantation or ion-assisted film deposition on the growth of human endothelial cells in vitro on a substrate has been studied. It was shown that the largest change occurs when TiO2 films were reactively sputtered onto the substrates, while the most passive surface was reactively sputtered SiO2. SEM pictures of the cells adhering to the various treated surfaces show that the cells were healthy. Future studies on the effect of alloy films and their oxides and nitrides are proposed.
Open Cell Al-Si Foams by a Sintering and Dissolution Process
2014
Open cell foams from AlSi12 alloy were successfully fabricated by the Sintering and Dissolution Process, using NaCl as space holder (60 %). The size of the aluminum alloy powder is less than 45 μm, while the space holder powder size is 315-500 μm, 630-800 μm and 800-1250 μm respectively. The appropriate quantities of alloy powder and salt were mixed and cold pressed at 250 MPa. The sintering process was done at 500 °C and 545 °C, in vacuum (10-5 torr) for 10, 20 and 30 minutes respectively. The space holder was eliminated by holding the sintered samples in running hot water (70 °C). After the salt was dissolved, the samples were dried and the mass loss was analyzed. Keywords: Aluminum foam…
Unravelling the chemical design of spin-crossover nanoparticles based on iron(ii)–triazole coordination polymers: towards a control of the spin trans…
2015
A systematic study of the key synthetic parameters that control the growth of spin-crossover (SCO) nanoparticles (NPs) using the reverse micelle technique has been undertaken in the system [Fe(Htrz)2(trz)](BF4)·H2O, (Htrz = 1,2,4-triazole). This has permitted us to modulate the physical properties of the NPs in a controlled and reproducible manner. In particular, a control over the size of the NPs (in the range 4 to 16 nm) has been achieved by varying the water to surfactant molar ratio. The consequences of this size variation on the cooperativity of the spin transition are discussed. Finally, this approach has been extended to the chemical alloy [Fe(Htrz)2.95(NH2trz)0.05](ClO4)2 in order t…