Search results for "engineering.material"
showing 10 items of 2352 documents
Biopolymer based nanocomposites reinforced with graphene nanoplatelets
2016
In this work, biopolymer based nanocomposites filled with graphene nanoplatelets (GnP) were prepared by melt compounding in a batch mixer. The polymer used as matrix was a commercial biodegradable polymer-blend of PLA and a copolyester (BioFlex®). The prepared materials were characterized by scanning electron microscopy (SEM), rheological and mechanical measurements. Moreover, the effect of the GnP amount on the investigated properties was evaluated. The results indicated that the incorporation of GnP increased the stiffness of the biopolymeric matrix.
Films of Halloysite Nanotubes Sandwiched between Two Layers of Biopolymer: From the Morphology to the Dielectric, Thermal, Transparency, and Wettabil…
2011
This study focused on the preparation and characterization of films based on biopolymers (hydroxypropylcellulose and low methoxyl pectin) and halloysite nanotubes (HNTs). The morphology is strongly dependent on the polymer nature. In particular, we observed a sandwich-like structure composed of two hydroxypropylcellulose layers incorporating the HNTs and a homogeneous distribution of the nanotubes into the low methoxyl pectin matrix. The different mesoscopic properties were invoked to explain the dielectric, thermal, and wettability properties of the corresponding films. Nanocomposites obtained by combining materials from renewable resources and HNTs is a challenging task in view of designi…
Effect of the Biopolymer Charge and the Nanoclay Morphology on Nanocomposite Materials
2016
This work represents a contribution to the design, preparation, and characterization of nanocomposite materials based on biocompatible components. The effects of composition, filler geometry, and polymer charge were highlighted, and their role on the final properties of the nanocomposites was revealed. We combined some biopolymers (methylcellulose, alginate, chitosan) with two nanoclays (kaolinite sheets and halloysite nanotubes) to prepare nanocomposites by means of the casting method from water. The thermal stability, the surface wettability, and the mechanical properties of the obtained films were studied. SEM micrographs highlighted the surface morphology of the biocomposite materials. …
Halloysite nanotubes as polyolefin fillers
2015
Artykuł stanowi przegląd najnowszej literatury dotyczącej nanokompozytów poliolefinowych napełnianych nanorurkami haloizytowymi (HNT). Omówiono wpływ dodatku HNT na osnowę poliolefinową, ze szczególnym uwzględnieniem morfologii oraz właściwości mechanicznych nanokompozytów poliolefina/HNT. Modyfikowane HNT wykazywały wysoki stopień rozproszenia w osnowie poliolefinowej, dzięki czemu powodowały poprawę właściwości mechanicznych poliolefinowych nanokompozytów napełnianych nanorurkami haloizytowymi. Połączenie korzystnych właściwości poliolefin, ekonomicznych metod ich przetwórstwa oraz unikatowych w³aoeciwooeci HNT pozwoli na szersze rozpowszechnienie nanokompozytów wytworzonych z ich udziałe…
Capillary Rise in Nanotubes Coated with Polymer Brushes
2009
The spontaneous rise of a fluid in a brush-coated nanocapillary is studied by molecular dynamics simulation of a coarse-grained model. The cases of changing wettability of both the capillary walls and the brush were examined. We also investigated the impact of polymer chain length on the transport of fluid along the nanotube. We found that capillary filling takes place in both lyophilic and lyophobic tubes, provided that the polymer brush coating is wetted by the fluid. In all the cases studied, capillary rise proceeds by a time-square law, but the mechanisms behind them (Lucas-Washburn or diffusive propagation) differ, depending on the chain length N. For a wettable wall, the speed of flui…
Functionalized halloysite multivalent glycocluster as a new drug delivery system.
2020
A new design for halloysite nanotube materials was obtained by grafting chemically modified cyclodextrin units onto the nanotube surface. In particular, grafted cyclodextrins were decorated with thiosaccharide pendants, in order to mimic the well-known binding of sugars to proteins and the glyco-cluster effect occurring during cellular recognition events. The obtained materials were characterized by using a combination of varied techniques (FT-IR spectroscopy, thermogravimetric analysis, scanning electron microscopy, dynamic light scattering, turbidimetry), and their potential drug-delivery abilities were tested by studying their interactions with the common naturally occurring anticancer a…
Deposition of very thin uniform indium sulfide layers over metallic nano-rods by the Spray-Ion Layer Gas Reaction method
2013
Abstract Very thin and uniform layers of indium sulfide were deposited on nickel nano-rods using the sequential and cyclical Spray-ILGAR® (Ion Layer Gas Reaction) technique. Substrates were fabricated by electrodeposition of Ni within the pores of polycarbonate membranes and subsequent chemical dissolution of the template. With respect to the depositions on flat substrates, experimental conditions were modified and optimized for the present geometry. Our results show that nano-rods up to a length of 10 μm were covered uniformly along their full length and with an almost constant film growth rate, thus allowing a good control of the coating thickness; the effect of the deposition temperature…
Contribution of Protein Flexibility to the Foaming Properties of Casein
1990
The effect of biopolymer flexibility on the foaming properties of casein was investigated. Flexibility was altered by: (1) chemical modification (covalent binding of a monosaccharide on the lysyl residues) or (2) pH change. Electron Spin Resonance was used to measure the reorientational frequency of casein residues labeled with nitroxide radicals. High levels of glycosylation induced increased protein flexibility and improved the foaming capacity. Good agreement was observed between higher values of flexibility and improved surface properties near the isoelectric point.
Barrier, structural and mechanical properties of bovine gelatin-chitosan blend films related to biopolymer interactions
2014
BACKGROUND The increased use of synthetic packaging films has led to a high ecological problem due to their total non-biodegradability. Thus, there is a vital need to develop renewable and environmentally friendly bio-based polymeric materials. Films and coatings made from polysaccharide polymers, particularly chitosans and gelatins have good gas barrier properties and are envisaged more and more for applications in the biomedical and food fields, as well as for packaging. In this study a casting method was used to develop an edible plasticised film from chitosan and gelatin. Aiming to develop a blend film with enhanced properties, the effects of mixing chitosan (CS) and gelatin (G) in diff…
Study by FT-IR spectroscopy of ageing of adhesives used in restoration of archaeological glass objects
1999
Abstract A study by FT-IR spectroscopy which aims to compare the stability of five polymers, Araldit XW396/XW 397, Vitralit 7256, Loctite 350, Desmodur N 75/Viacryl SM 564/65 and Krafft silicone commonly used in the restoration of archaeological glass objects when subjected to thermal ageing, UV light ageing and cyclic ageing in SO 2 pollutant chamber has been carried out. Two series of test specimens were prepared in order to reproduce the two methods of application of polymers commonly used in restoration treatments as adhesive and consolidant or coating of glass fragments. Modifications in the chain or side chain structure of polymers, alterations of carbonyl groups in Araldit and isocya…