Search results for "engineering.material"
showing 10 items of 2352 documents
On the compatibilization of PET/HDPE blends through a new class of copolyesters
2000
Polyethyleneterephthalate (PET) and polyethylene are incompatible polymers and their blends show, in general, poor properties. Compatibilization is then a necessary step to obtain blends with good mechanical and barrier properties. In this work different compatibilizing agents were used, i.e. a maleic anhydride elastomer and some new products containing graft-copolymers having polyester segments grafted onto polyethylene backbone chains. Both the functionalized elastomer and the new products drastically improve the morphology and the ductility of the blend. In the case of the modified elastomer the compatibilizing action has been attributed to the formation of H-bonds whereas the copolymers…
Characterization and Processability of Blends of Polylactide Acid with a New Biodegradable Medium-Chain-Length Polyhydroxyalkanoate
2015
In this work the processability and the mechanical performance of polylactide acid (PLA) based blends with a sample of a new biodegradable medium-chain-length poly (hydroxyalkanoate) (PHA) were investigated. The two polymers are incompatible with scarce adhesion and with the dispersed PHA particles size increasing with the PHA content. Rheological tests in shear flow indicate that adding PHA improves the processability of the matrix by increasing the content of this second component in the blend, as observed also for the torque curves, due to the very low viscosity of this new sample of PHA. The processability is only slightly worsened in non-isothermal elongational flow as the melt strengt…
Basis for the Preparative Fractionation of a Statistical Copolymer (SAN) with Respect to Either Chain Length or Chemical Composition
2003
The possibilities to fractionate copolymers with respect to their chemical composition on a preparative scale by means of the establishment of liquid/liquid phase equilibria were studied for random copolymers of styrene and acrylonitrile (SAN). Experiments with solutions of SAN in toluene have shown that fractionation does in this quasi-binary system, where demixing results from marginal solvent quality, take place with respect to the chain length of the polymer only. On the other hand, if phase separation is induced by a second, chemically different polymer, one can find conditions under which fractionation with respect to composition becomes dominant. This opportunity is documented for th…
PEO/CHCl3. Crystallinity of the Polymer and Vapor Pressure of the Solvent. Equilibrium and Nonequilibrium Phenomena
2003
Vapor pressures were measured for the system CHCl3/PEO 1000 (PEO stands for poly(ethylene oxide) and 1000 for Mw in kg/mol) at 25 °C as a function of the weight fraction w of the polymer by means of a combination of headspace sampling and gas chromatography. The establishment of thermodynamic equilibria was assisted by employing thin polymer films. The degrees of crystallinity α of the pure PEO and of the solid polymer contained in the mixtures were determined via DSC. An analogous degree of polymer insolubility β was calculated from the vapor pressures measured in this composition range. The experiments demonstrate that both quantities and their concentration dependence are markedly affect…
Preferential evaporation of precipitants from polymer solutions in mixed solvents
2000
Partial vapor pressures were measured for the volatiles of solutions of polysulfone or polyethersulfone in mixtures of N,N-dimethylformamide (DMF, solvent) and water or acetone (precipitants) by means of headspace gas chromatography. The results demonstrate that the enrichment of water in the gas phase increases exponentially with rising polymer concentration, in contrast to that of acetone which remains constant. The reinforced expulsion of water resulting from the presence of polymers is theoretically conceivable and should be useful in the field of separation techniques.
Recycling of the "light fraction" from municipal post-consumer plastics: Effect of adding wood fibers
1999
At present the recycling of plastic materials is mostly done using homogeneous polymers. Therefore a separation from a municipal collection of plastic objects is necessary before recycling operations. The easiest way of separation is by flotation in water, i.e. the separation of the different plastics based on the different densities with respect to water. This means that all the plastic materials are separated in a “light fraction” mostly of polypropylene and polyethylene and in a “heavy fraction” mainly of poly(vinyl chloride) (PVC) and poly(ethylene terephthalate). The recycling of the light fraction should, in principle, be easy because of the relative similarity of the chemical structu…
Improving the properties of polypropylene–wood flour composites by utilization of maleated adhesion promoters
2007
Polymer composites filled with natural organic fillers have gained a significant interest during the last few years, because of several advantages they can offer compared with properties of inorganic-mineral fillers. However, these composites (based, in most cases, on polyolefins) often show a reduction in some mechanical properties. This is mainly due to the problems regarding dispersion of the polar filler particles in the non-polar polymer matrix and their interfacial adhesion with polymer chains. In this work, polypropylene-wood flour composites were prepared and the effect of the addition of a maleated polypropylene was investigated. The two materials were compounded by an industrial c…
Anisotropic Stick-slip friction of highly oriented thin films of poly(tetrafluoroethylene) at the molecular level
1996
Lateral force microscopy (LFM) studies of poly(tetrafluoroethylene) (PTFE) films with molecular resolution are reported. Thin PTFE layers with a high degree of orientation were obtained by pressing and sliding a block of polymer on a clean, heated muscovite mica substrate. LFM nanographs obtained on these films by scanning at directions between ca. 40 and 90° with respect to the film orientation direction, i.e. with respect to the direction of the polymer chains, showed a “stick-slip” type frictional motion of the LFM probe tip at the molecular level. The friction force observed at constant load decreased with decreasing scan angles. Chain-chain packing distances obtained by LFM and contact…
Technological development and functional properties of an apple snack rich in flavonoid from mandarin juice
2012
Abstract The development of functional foods has evolved considerably over the years. The technological ability to produce a food with enhanced physiologically active compounds has grown significantly. The aim of this work was to study the incorporation of the beneficial compounds from mandarin low pulp juice into an apple snack using vacuum impregnation technology and to test if the final product exhibited the functional properties and components of both raw materials. Forty grams of the final product made using mandarin juice homogenized at 15 MPa could provide the same quantity of hesperidin as 250 mL of fresh mandarin juice. We also performed a chromatographic determination of the compo…
Sulfide ore facies, fluid inclusion and sulfur isotope characteristics of the Tappehsorkh Zn-Pb ( ± Ag-Ba) deposit, South Esfahan, Iran
2020
International audience; The stratiform, stratabound Tappehsorkh Zn-Pb (± Ag-Ba) deposit, located in the southeastern part of the Malayer-Esfahan Metallogenic Belt of Iran, formed during Lower Cretaceous back-arc extension. Sulfide mi-neralization occurs within dolostone, black siltstone, and crystal lithic tuff and andesite associated with the Gushfil-Baghabrisham synsedimentary normal fault. Three sulfide ore facies (massive, bedded, and stockwork) occur in the deposit. Sulfide minerals are sphalerite, galena, tetrahedrite and pyrite with minor chalcopyrite and bornite, and gangue minerals are barite, dolomite and quartz. Sulfide mineralization textures are massive, replacement , vein-vein…