Search results for "engineering.material"
showing 10 items of 2352 documents
Microbial production and recovery of hybrid biopolymers from wastes for industrial applications- a review
2021
Abstract Agro-industrial wastes to be a global concern since agriculture and industrial processes are growing exponentially with the fast increase of the world population. Biopolymers are complex molecules produced by living organisms, but also found in many wastes or derived from wastes. The main drawbacks for the use of polymers are the high costs of the polymer purification processes from waste and the scale-up in the case of biopolymer production by microorganisms. However, the use of biopolymers at industrial scale for the development of products with high added value, such as food or biomedical products, not only can compensate the primary costs of biopolymer production, but also impr…
Sulphate Removal from Water by Carbon Residue from Biomass Gasification: Effect of Chemical Modification Methods on Sulphate Removal Efficiency
2016
Sulphate removal from mine water is a problem because traditional chemical precipitation does not remove all sulphates. In addition, it creates lime sediment as a secondary waste. Therefore, an inexpensive and environmental-friendly sulphate removal method is needed in addition to precipitation. In this study, carbon residues from a wood gasification process were repurposed as precursors to a suitable sorbent for SO42- ion removal. The raw material was modified using ZnCl2, BaCl2, CaCl2, FeCl3, or FeCl2. Carbon residues modified with FeCl3 were selected for further consideration because the removal efficiency toward sulphate was the highest. Batch sorption experiments were performed to eval…
Vertical Distribution and Speciation of Trace Metals in Weathering Flotation Residues of a Zinc/Lead Sulfide Mine
2007
Sulfide-bearing mine tailings are a serious environmental problem around the world. In this study, the vertical distribution and speciation of Zn and Pb in the fine-grained flotation residues of a former sulfide ore mine in Germany were investigated to assess the inorganic weathering processes that effect the environmental risk arising from this site. Total metal contents were determined by X-ray fluorescence spectroscopy (XRF). Mobilizable fractions of Zn, Pb, Fe, and Mn were quantified by sequential chemical extractions (SCE). Furthermore, the speciation of Zn was analyzed by Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) to identify the residual Zn species. The v…
Chlorinated cymenes in effluents of two Finnish pulp mills in 1990–1993
1995
Abstract Seven chlorocymenes (CYMS) and 2,3,6-trichloro-p-cymenene (236CYMD) were determined in effluents of biological purification plants of two Finnish pulp mills during the years 1990–1993. Both pulp mills changed their bleaching process and consequently, a steep decreasing trend in emitted amounts of the studied compounds was noticed.
The closure of water circuits by internal thermophilic (55 and 70�C) anaerobic treatment in the thermomechanical pulping process
1997
The suitability of an internal thermophilic anaerobic treatment system for closing the water circuits in thermomechanical pulp (TMP) production was studied. The dissolution of wood organics in the water circuit was simulated by hot disintegration of TMP pulp, while the water system closure was simulated by repeated hot disintegration of TMP pulp with recirculated water. The upflow anaerobic sludge blanket (UASB) reactors were started at 55 and 70°C with mesophilic inoculum, and stable performances were established within 60 days at both temperatures. Closing the water circuits without internal treatment rapidly resulted in increased chemical oxygen demand (COD) in the recirculated water. In…
Pilot-scale comparison of thermophilic aerobic suspended carrier biofilm process and activated sludge process in pulp and paper mill effluent treatme…
2004
Thermophilic aerobic treatment of settled pulp and paper mill effluent was studied under mill premises with two comparative pilot processes; suspended carrier biofilm process (SCBP) and activated sludge process (ASP). Full-scale mesophilic activated sludge process was a reference treatment. During the runs (61 days) hydraulic retention times (HRTs) were kept 13 ± 5 h and 16 ± 6 h for SCBP and ASP, respectively. Corresponding volumetric loadings rates (VLR) were 2.7 ± 0.9 and 2.2 ± 1.0 kg CODfilt m-3d-1. Temperatures varied between 46 to 60°C in both processes. Mesophilic ASP was operated with HRT of 36 h, corresponding VLR of 0.7 kg CODfilt m-3d-1. Both SCBP and ASP achieved CODfilt (GF/A f…
Removal of DEHP in composting and aeration of sewage sludge.
2003
The potential of composting and aeration to remove bis(2-ethylhexyl) phthalate (DEHP) from municipal sewage sludge was studied with two dewatered sludges: raw sludge and anaerobically digested sludge. Composting removed 58% of the DEHP content of the raw sludge and 34% of that of the anaerobically digested sludge during 85 days stabilisation in compost bins. A similar removal for the anaerobically digested sludge was achieved in a rotary drum in 28 days. Less than 1% of DEHP was removed with the compost leachate. Although DEHP removal was greater from raw sludge compost than anaerobically digested sludge compost, the total and volatile solids removals were on the same level in the two compo…
Chlorinated phenolic compounds in coniferous needles. Effects of metal and paper industry and incineration
1997
Abstract Pine needles were analyzed for their contents of chlorinated phenolic compounds. Altogether about 30 samples from surroundings of a metal scrap plant, a pulp and paper mill, a hazardous waste incinerator and reference samples outside of the immediate influence of these were analyzed by GC/ECD and GC/MS. Most phenolic compounds in the needles were found to be bound to the plant material and were not extractable as such by organic solvents. The concentrations of some bound chlorinated phenolic compounds were on level of 1–300 ng/g in dried needle. For many compounds the concentrations were remarkably higher in the three years old needles compared to the concentrations in the one and …
PCDDs, PCDFs, PCDTs, PCBs and some other organochlorine compounds in pine needles exposed to pulp and paper mill emissions and effects of waste combu…
1997
Concentrations of semivolatile chlorinated organic compounds α-HCH, lindane, HCB, DDT, DDE, DDD, chlordanes and PCBs, and low-volatility compounds PCDDs, PCDFs and PCDTs in pine needles in a recipient area of the emissions from a pulp and paper mill where also waste combustion was done were measured. Mostly, the concentrations were found to be near the background levels. Elevated concentrations of HCB, some PCB congeners and some HxCDF isomers in samples from two sampling points were observed. Some other possible point sources of these compounds are situated in the vicinity of the pulp and paper mill.. Also the community of Pietarsaari is one possible source of the slightly elevated concent…
Acute toxicity of experimental fertilizers made of blood meal, spent coffee ground and biomass ash
2017
Abstract The study presents the results of research on the acute toxicity of a fertilizer formulas made of spent coffee ground (SCG) with addition of ash from low-temperature combustion of biomass or ash with an admixture of magnesium sulphate and blood meal. The experimental fertilizer formulas included also rape oil used as a plasticizer for controlling the nutrients release from the fertiliser. Mustard (Sinapis alba L.), oats (Avena sativa sp. L.), cucumber (Cucumis sativus L.) and cress (Lepidium sativum L.) were used as test plants species in the experiment. The toxicity tests were performed using a standard procedure of 72 h with the use of Phytotoxkit microbiotest and fertilizer appl…