Search results for "environmental engineering"
showing 10 items of 2674 documents
Removal of bis (2-ethylhexyl) phthalate from reject water in a nitrogen-removing sequencing batch reactor.
2003
Reject water from sewage sludge processing may contain high concentrations of nutrients and organic pollutants and cause internal pollution load at a sewage treatment plant (STP) if circulated to the headworks of an STP. In the present study removal of nitrogen and bis (2-ethylhexyl) phthalate (DEHP) from reject water was studied in two sequencing batch reactors (SBRs) with different aerobic/anoxic periods during a 6-h total cycle period. Ammonia-nitrogen (NH(4)-N) was almost totally removed in both reactors, apparently by nitrification throughout the run, while denitrification declined with decreasing SCOD in the influent resulting in an increase in the effluent nitrate-nitrogen (NO(3)-N) …
Occurrence and removal of organic pollutants in sewages and landfill leachates
2002
Sewages of different composition and the effluents of four sewage treatment plants (STPs), plus sewage sludges were analysed for semivolatile organic priority pollutants. Furthermore, 11 landfill leachates were analysed to evaluate their contribution to sewage pollutants when co-treated. Bis(2-ethylhexyl) phthalate (DEHP) was the pollutant occurring at highest concentrations (up to 122 microg/l) and it was present in all sewages and leachates; concentrations of other phthalates were usually below 17 microg/l. Some polycyclic aromatic hydrocarbons (PAH) (<1 microg/l) and 2,6-dinitrotoluene (< or =5.9 microg/l) were also present in many of the sewages and leachates. Phthalates were present in…
Removal of bis(2-ethylhexyl) phthalate at a sewage treatment plant
2003
Bis(2-ethylhexyl) phthalate (DEHP) concentrations were measured at different stages in a full-scale sewage treatment plant (STP) and mass balances were calculated. The DEHP load to treatment process coming from the sewer system and the internal load comprising returned supernatants and filtrate from sludge treatment and excess secondary sludge were at the same level. The DEHP removal efficiency from the water phase at the STP was on average 94% of sewage DEHP, the main removal process being sorption to primary and secondary sludges. On average 29% of DEHP was calculated to be removed in the biological nitrifying-denitrifying activated sludge process, which was much less than expected from l…
Optimal matching between optical rectennas and harvester circuits
2017
This paper deals with optimal coupling issues between rectennas and harvesting circuits. An optical rectenna consists of a nanoantenna usually coupled with an ultra-high speed rectifier. These devices aim to receive and convert solar and thermal radiation in a DC voltage, while a harvester circuit provides the energy to be stored. The rectenna impedance is influenced both by its structure and by the rectifying diode, the harvester circuit impedance has to be matched to optimize the power transfer. The purpose of this contribution is to discuss the best impedance conditions by taking into account the constraints that are due to the individual devices the conversion system consist of. Finally…
Coupled Electric and Hydraulic Control of a PRS Turbine in a Real Transport Water Network
2019
Although many devices have recently been proposed for pressure regulation and energy harvesting in water distribution and transport networks, very few applications are still documented in the scientific literature. A new in-line Banki turbine with positive outflow pressure and a mobile regulating flap, named Power Recovery System (PRS), was installed and tested in a real water transport network for the regulation of pressure and flow rate. The PRS turbine was directly connected to a 55 kW asynchronous generator with variable rotational velocity, and coupled to an inverter. The start-up tests showed how automatic adjustment of the flap position and the runner velocity variation are able to c…
Microbial fuel cell with Ni-Co cathode
2016
The possibility of trwastewater treatment using the Ni-Co alloys as catalysts for cathode of mickrobial fuel cells is presented in this paper. Using the Ni-Co catalyst allows to increase the power of prototype microbal fuel sell. Use of Ni-Co catalyst will increase the efficiency of the production of electricity. Thid solution will allow to contribute to the development of high efficiency green energy sources.
User behavior in Smart and Sustainable Offices (SSO)
2017
Smart and Sustainable Offices (SSO) require synergies between technologies and users behaviors. The sociotechnical approach considers users’ motives, attitudes, cognitions and behaviors when designing work environments. This note will describe those phenomena in office environments. It will also present a set of tools to assess those phenomena and will provide guidelines to improve them.
Assessment of the Sabellaria alveolata reefs’ structural features along the Southern coast of Sicily (Strait of Sicily, Mediterranean Sea)
2022
The honeycomb worm Sabellaria alveolata is a gregarious tube-dwelling polychaete that builds remarkable biogenic reefs in marine coastal waters. Sabellaria alveolata reefs are considered valuable marine habitats requiring protection measures for their conservation, as they play a key role in the functioning of coastal ecosystems. Sabellarid reefs are extensively developed along the Atlantic coasts of Europe and reported for the Mediterranean Sea and the Italian coasts, where large reefs have been recorded in several localities. Fragmentary information is available on their health status, Sabellaria reefs thus being listed as “Data Deficient” in the Red List of Marine Habitats. To fill this …
Feasibility of Waste Engine Oil Electrooxidation with Ni-Co and Cu-B Catalysts
2022
To implement a circular economy policy, methods of using waste products as a starting point for other technologies are constantly researched. One of the waste products that should be disposed of after use is waste engine oil (WEO). Despite the permanent introduction of the electrification of cars, the number of combustion vehicles (and, thus, the production of WEO) is constantly increasing. For these reasons, the reuse of WEOs is extremely important; e.g., to use these oils for energy purposes. One of the potential uses of this type of oil is as fuel for fuel cells (for direct electricity production). To lower the production costs of electrodes for fuel cells, catalysts that do not contain …
Preparation and Analysis of Ni–Co Catalyst Use for Electricity Production and COD Reduction in Microbial Fuel Cells
2019
Microbial fuel cells (MFCs) are devices than can contribute to the development of new technologies using renewable energy sources or waste products for energy production. Moreover, MFCs can realize wastewater pre-treatment, e.g., reduction of the chemical oxygen demand (COD). This research covered preparation and analysis of a catalyst and measurements of changes in the concentration of COD in the MFC with a Ni&ndash