Search results for "extension"

showing 10 items of 534 documents

Bivergent extension in orogenic belts: The Menderes massif (southwestern Turkey): Comment and Reply

1996

geographygeography.geographical_feature_categoryExtension (metaphysics)GeochemistryGeologyMassifSeismologyGeologyGeology
researchProduct

Miocene NNE-directed extensional unroofing in the Menderes Massif, southwestern Turkey

1995

Structural investigations in the central part of the Menderes Massif (Odemis-Kiraz submassif) reveal the presence of a large-scale, low-angle extensional shear zone with a top-to-the-N-NE shear sense. Regional ductile deformation was accompanied by the intrusion of two syntectonic granodiorites that have been dated with the Ar-40/Ar-39 method. One hornblende isochron age of 19.5 +/- 1.4 Ma and two biotite plateau ages of 13.1 +/- 0.2 and 12.2 +/- 0.4 Ma, respectively, constrain that extension was already active in the early Miocene. Successive tectonic denudation of the Odemis-Kiraz submassif resulted in the formation of a N-dipping detachment fault, in which ductile fabrics were severely r…

geographygeography.geographical_feature_categoryExtensional faultGeochemistryGeologyMassifCataclastic rockFault (geology)Detachment faultGrabenShear (geology)Shear zoneGeomorphologyGeologyJournal of the Geological Society
researchProduct

Geophysical investigation of Pleistocene volcanism and tectonics offshore Capo Vaticano (Calabria, southeastern Tyrrhenian Sea)

2015

Abstract Magma upwelling forming volcanic plumbing systems in back arc settings is typically controlled by extensional tectonic structures of the upper crust. Here we investigate this process in the area between the volcanic arc of the Aeolian Islands and the Calabrian arc (SE Tyrrhenian Sea) by integrating morpho-bathymetry and reflection seismic data with the outcomes of “Inverse 3D magnetic modeling” of previously gathered aeromagnetic data. Morpho-bathymetric data highlight the presence of a seamount ∼10 km offshore Capo Vaticano Promontory (eastern Calabria). This feature, named Capo Vaticano seamount is composed of a series of NE-trending ridges, the greatest of which (R1) is ∼12 km l…

geographygeography.geographical_feature_categoryExtensional faultSettore GEO/02 - Geologia Stratigrafica E SedimentologicaVolcanic arcSettore GEO/03 - Geologia StrutturaleSeamountTectonicsAeolian Volcanic ArcGeophysicsSubmarine volcanoCalabrian ArcTectonics submarine volcano aeromagnetic anomaly Calabrian Arc Aeolian Volcanic Arc.TectonicsGeophysicsVolcanoRidgeAeromagnetic anomalyMagnetic anomalySubmarine volcanoGeologyEarth-Surface Processes
researchProduct

Tectonothermal Evolution of the Broadly Rifted Zone, Ethiopian Rift

2019

The Broadly Rifted Zone (BRZ) of southern Ethiopia is a long-lived and structurally complex segment of the East African Rift System. However, due to poor surface exposure of early synrift strata and a dearth of subsurface data, the evolution of the BRZ remains poorly understood. We present new apatite (U-Th-Sm)/He and augmented apatite fission track low-temperature thermochronology data from the Beto and Galana basin boundary fault systems to constrain the tectonothermal evolution of the western and eastern BRZ, respectively. Time-temperature reconstructions suggest that East African Rift System-related extension began concurrently across the BRZ in the early Miocene (20–17 Ma), at least 6 …

geographygeography.geographical_feature_categoryRift010504 meteorology & atmospheric sciencesFault (geology)010502 geochemistry & geophysicsFission track dating01 natural sciencesThermochronologyPaleontologyGeophysicsBasement (geology)Geochemistry and PetrologyLithosphereEast African RiftSuture (geology)apatite fission-track; low-temperature thermochronology; normal-fault growth; east-african; radiation-damage; continental extension; helium diffusion; Nubia-Somalia; (U-Th)/He thermochronometry; transantarctic mountainsGeology0105 earth and related environmental sciencesTectonics
researchProduct

Rift nucleation, rift propagation and the creation of basement micro-plates within active rifts

2008

Abstract In this contribution we study the dynamics of rift nucleation and the interaction of propagating rift segments. We use the East African Rift System (EARS) as a case study with special emphasis on the Albertine rift system situated within the western branch of the EARS with the 5000 m high Rwenzori horst, a basement block that was captured by two rift segments. Fieldwork in the Rwenzori mountains shows that the range is not only affected by range parallel faults but that major fault sets cut across the Rwenzoris. In order to understand these complex fault patterns and the dynamics of the process that leads to the capturing of basement blocks within the extending rift system we devel…

geographygeography.geographical_feature_categoryRiftExtensional faultFault (geology)GeophysicsLithosphereEast African RiftHalf-grabenClockwiseHorstGeologySeismologyEarth-Surface ProcessesTectonophysics
researchProduct

Corticospinal and intracortical excitability is modulated in the knee extensors after acute strength training

2022

The corticospinal responses to high-intensity and low-intensity strength-training of the upper limb are modulated in an intensity-dependent manner. Whether an intensity-dependent threshold occurs following acute strength training of the knee extensors (KE) remains unclear. We assessed the corticospinal responses following high-intensity (85% of maximal strength) or low-intensity (30% of maximal strength) KE strength-training with measures taken during an isometric KE task at baseline, post-5, 30 and 60-min. Twenty-eight volunteers (23 ± 3 years) were randomized to high-intensity (n = 11), low-intensity (n = 10) or to a control group (n = 7). Corticospinal responses were evoked with transcra…

intracortical inhibitionaivokuorihermo-lihastoimintaexercisemaximal strengthknee extensioncorticospinal excitabilityvoimaharjoitteluneuroplastisuusharjoitusvastelihasvoima
researchProduct

RAPID PROTOTYPING FOR THE EXTENSION OF THE ACCESSIBILITY TO CULTURAL HERITAGE FOR BLIND PEOPLE

2019

Abstract. The extension of accessibility of CH to disabled people is a current topic of great importance. Today, there exist a lot of ongoing projects aimed at the extension of accessibility using the most recent and low cost technologies to improve accessibility to CH. One of the technologies, today available that can help to improve accessibility to CH, is certainly rapid prototyping. The main goal of the research here illustrated is the application of rapid prototyping for the extension of accessibility of Cultural Heritage (CH) to blind and visually impaired people. This document reports an experiment that compared the effectiveness of different 3D models for the introduction of blind a…

lcsh:Applied optics. PhotonicsRapid prototyping010504 meteorology & atmospheric sciencesMultimedialcsh:TComputer science010401 analytical chemistrylcsh:TA1501-1820Disabled peopleSample (statistics)computer.software_genreLegibilitylcsh:Technology01 natural sciences0104 chemical sciencesCultural heritageExtension (metaphysics)lcsh:TA1-2040lcsh:Engineering (General). Civil engineering (General)computer0105 earth and related environmental sciencesThe International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
researchProduct

EXPERIMENTAL INVESTIGATION OF DILUTE SOLID-LIQUID SUSPENSION IN AN UNBAFFLED STIRRED VESSELS BY A NOVEL PULSED LASER BASED IMAGE ANALYSIS TECHNIQUE

2009

The availability of experimental information on solid distribution inside stirred tanks is a topic of great importance in several industrial applications. The measurement of solid particle distribution in turbulent multiphase flow is not simple and the development of suitable measurement techniques is still in progress. In this work a novel non-intrusive technique for measuring particle concentration fields in solid-liquid systems is employed. The technique makes use of a laser sheet, a high sensitivity digital camera for image acquisition and a Matlab procedure for post-processing the acquired images. Experimental data are here obtained for the case of an unbaffled stirred tank. Stable tor…

lcsh:Computer engineering. Computer hardwareSettore ING-IND/25 - Impianti Chimicilcsh:TP155-156lcsh:TK7885-7895lcsh:Chemical engineeringThe availability of experimental information on solid distribution inside stirred tanks is a topic of great importance in several industrial applications. The measurement of solid particle distribution in turbulent multiphase flow is not simple and the development of suitable measurement techniques is still in progress. In this work a novel non-intrusive technique for measuring particle concentration fields in solid-liquid systems is employed. The technique makes use of a laser sheet a high sensitivity digital camera for image acquisition and a Matlab procedure for post-processing the acquired images. Experimental data are here obtained for the case of an unbaffled stirred tank. Stable toroidal attractors for particles are observed under given circumstances. Their existence consistency and extension depends on particle type fluid properties tank geometry and impeller velocity.Chemical Engineering Transactions
researchProduct

Associations between muscle strength, spirometric pulmonary function and mobility in healthy older adults

2014

Background: Pathological obstruction in lungs leads to severe decreases in muscle strength and mobility in patients suffering from chronic obstructive pulmonary disease. The purpose of this study was to investigate the interdependency between muscle strength, spirometric pulmonary functions and mobility outcomes in healthy older men and women, where skeletal muscle and pulmonary function decline without interference of overt disease. Methods: 135 69 to 81‐yr‐old participants were recruited into the cross‐sectional study, which was performed as a part of European study MyoAge. Full, partial and no mediation models were constructed to assess the interdependency between muscle strength (handgr…

lower extremity muscle powertimed up and go testhandgrip strengthsix-minute walk testspirometriaspirometric pulmonary functionknee extension torque
researchProduct

Determination of the Optimal Saddle Height for Leisure Cycling (P188)

2008

Several studies have been done on road racing cycling and triathlon to determine the optimal saddle height (LINF) in terms of efficiency. However, cycling is becoming nowadays not only a popular sport but also a mass mean of transport were comfort takes priority over efficiency. The aim of this study is to determine an optimal saddle height (LINF) to improve comfort in leisure cycling. Five male subjects (height mean=172.2 cm, std=1.34 cm; crotch height mean=81.25cm, std=0.88cm) tested 9 prototypes of the company ORBEA with 3 levels of LINF. The test consisted in one hour cycling in lab conditions and four different techniques were used to evaluate the LINF: 3-D movement analysis was used t…

medicine.anatomical_structurePeak pressureStatisticsCrotchmedicineBiomechanicsAnalysis of varianceKnee extensionCyclingIntermediate levelSaddleMathematics
researchProduct