Search results for "filter"

Optoelectronic morphological image processor.

2009

A morphological optoelectronic image processor based on the threshold decomposition concept is described and demonstrated. Binary slices of a gray-scale input image are optically convolved with a binary structuring element of arbitrary size and shape in a noncoherent convolver. The slices are displayed on a liquid-crystal spatial light modulator of 320 × 264 pixels. The kernels are implemented as modifications of the system impulse response. The processor’s convolution patterns are recorded with a CCD camera and fed into a PC by a frame grabber. Subsequent elementary morphological operations are looped. Examples of processing an input image of 256 × 256 pixels and 16 gray levels with kernel…

Axial apodization in 4Pi-confocal microscopy by annular binary filters

2002

We present a novel technique for considerably decreasing the sidelobe height of the axial point-spread function of one-photon 4Pi-confocal microscopes. By means of a numerical example, in which the ratio between the excitation and the fluorescence wavelengths was set to epsilon = lambdaexc/lambdadet = 0.8, we show that simply inserting a pair of properly designed two-ring binary masks in the illumination set allows the height of the axial sidelobes to be reduced from 20% to 5% of the height of the central peak. This allows one to receive the full benefit of the strong narrowness of the central lobe provided by the 4Pi-confocal technique.

2021

Abstract We propose a signal deconvolution procedure for imaging spectrometer data, where a measured point spread function (PSF) is deconvolved itself before being used for deconvolution of the signal. We evaluate the effectiveness of our procedure for improvement of the spatio-spectral signal, as well as our target application, i.e. estimation of sun-induced fluorescence (SIF). Imaging spectrometers are well established instruments for remote sensing. When used for scientific purposes these instruments are usually calibrated on a regular basis. In our case the point spread function of the optics is measured in an elaborate procedure with a tunable monochromator point light source. PSFs are…

Quantitative DNA Analyses for Airborne Birch Pollen

2015

Birch trees produce large amounts of highly allergenic pollen grains that are distributed by wind and impact human health by causing seasonal hay fever, pollen-related asthma, and other allergic diseases. Traditionally, pollen forecasts are based on conventional microscopic counting techniques that are labor-intensive and limited in the reliable identification of species. Molecular biological techniques provide an alternative approach that is less labor-intensive and enables identification of any species by its genetic fingerprint. A particularly promising method is quantitative Real-Time polymerase chain reaction (qPCR), which can be used to determine the number of DNA copies and thus poll…

Mathematical modeling of the biofiltration of ethyl acetate and toluene and their mixture

2009

Abstract A dynamic model for ethyl acetate and toluene removal by biofiltration is presented. Haldane-type kinetic expressions that include the oxygen limitation, the inhibition effect due to high concentration of substrate, and the cross-inhibition between substrates have been considered. A decrease in the biomass density with the bed height was proposed to represent the performance of peat biofilters over a broad range of operating conditions. Experimental yield coefficients have been derived from the experimental CO 2 production data. The unknown kinetic parameters of the model along with the coefficient for axial biomass density distribution were calibrated using experimental data from …

Evaluation of a combined activated carbon prefilter and biotrickling filter system treating variable ethanol and ethyl acetate gaseous emissions

2009

The removal of a 1:1 by weight mixture of ethanol and ethyl acetate was studied in a gas phase biotrickling filter running under conditions that simulated industrial emissions from the flexographic sector, i.e. discontinuous loading (twelve hours per day and five days per week) and oscillating concentration of the inlet stream. Three sets of experimental conditions were tested in which empty-bed residence time varied from 60 to 25s (inlet loads from 50 to 90g Cm -3 h -1 ). The biotrickling filter reached a maximum elimination capacity of 48.5g Cm -3 h -1 (removal efficiency = 68.9%) for an empty-bed residence time of 40 s. A decrease in the residence time from 40 to 25 s adversely affected …

Energy intensity modeling for wastewater treatment technologies.

2018

Wastewater treatment plants (WWTPs) are energy intensive facilities; therefore increased pressure has been placed on managers and policy makers to reduce the facilities' energy use. Several studies were conducted to compare the energy intensity (EI) of WWTPs, which showed large dispersion in EI among the facilities. In the present study, the degree EI influenced WWTPs was tested using a set of technical variables by modeling the EI of a 305 WWTP sample grouped into five secondary treatment technologies. Results indicated the following two major findings: i) WWTPs using conventional activated sludge, extended aeration, trickling biofilters, and biodisks exhibited significant economies of sca…

Removal of ethyl acetate, n-hexane and toluene from waste air in a membrane bioreactor under continuous and intermittent feeding conditions

2012

BACKGROUND: European Union environmental policy has focused on abatement of volatile organic compounds (VOCs) from industrial emissions, and new European VOC emission limits have been established. This study analyzes the performance of a composite membrane bioreactor treating air stream contaminated with ethyl acetate, n-hexane and toluene under continuous and intermittent feeding conditions. RESULTS: The system was operated under continuous feeding conditions: removal efficiencies (REs) higher than 99% were obtained for inlet loads up to 200 g m−3 h−1 and empty bed residence times (EBRTs) as short as 15 s for ethyl acetate. A maximum elimination capacity of 75 g m−3 h−1 (RE ∼66%) at an EBR…

Energy intensity of treating drinking water: Understanding the influence of factors

2017

Abstract To provide safe drinking water to urban populations, raw water must be treated in drinking water treatment plants, which are energy-intensive facilities. Previous studies have assessed energy intensity (EI: unit of energy required per unit of treated water) of conventional drinking water treatment plants, but they ignored variations related to water treatment trains. By modeling 179 facilities of four water treatment trains, we explored factors potentially affecting energy intensity, such as removal efficiencies of pollutants and treatment capacities of drinking water treatment plants. We also investigated the economies of scale in energy intensity of drinking water treatment plant…

Biofiltration of ethyl acetate under continuous and intermittent loading

2007

A laboratory-scale peat biofilter was used for ethyl acetate removal from an air stream over a period lasting 1 yr. In a first stage, the biofilter was operated under continuous mode: a maximum elimination capacity of 400 g m−3 h−1 was obtained, and ethyl acetate was efficiently degraded with empty bed residence time (EBRT) as short as 22 s. The estimated yield coefficient, determined from the carbon dioxide production, resulted in 0.42 g dry biomass produced per gram of ethyl acetate consumed. The living and the dead cell concentrations were also monitored. The dead cell percentages varied between 18 and 85%, progressive increases in the dead cell percentages were achieved as EBRT decrease…