Search results for "fluidized be"

showing 10 items of 35 documents

Characterization and pilot scale fluidized bed gasification of herbaceous biomass: A case study on alfalfa pellets

2015

Abstract Pilot-scale bubbling fluidized bed gasification tests of alfalfa pellets were performed at two different operational periods ranged on the basis of the two given equivalence ratio (ER) (the ratio between actual air and the stoichiometric air) namely as 0.25 and 0.30. During the test, the solid feeding rate was kept constant at 4.7 kg/h while the air input was varied and thus the ER. Increasing air from 4.16 to 4.99 N m3/h contributed to the evolution pattern of several parameters such as the rise in gas lower heating value (LHV) and gas yield, the average maximum of which were 4.2 MJ/N m3 and 1.5 N m3/kg respectively. Gas composition was mainly boosted by the concentration of CO, a…

Renewable Energy Sustainability and the EnvironmentAirflowPelletsEnvironmental engineeringEnergy Engineering and Power TechnologyTarBiomassPulp and paper industryFuel TechnologyNuclear Energy and EngineeringFluidized bedEnvironmental scienceHeat of combustionCharGas compositionEnergy Conversion and Management
researchProduct

ON THE BUBBLING DYNAMICS OF BINARY MIXTURES OF PARTICLES IN 2D GAS-SOLID FLUIDIZED BEDS

2011

The bubbling behaviour of fluidized beds has been thoroughly investigated in the last decades by means of several techniques, e.g. X-ray, Inductance, Resistance and Impedance based techniques, PIV. In recent years, Digital Image Analysis Techniques have shown their potential for accurate and cost effectively measurements. Most of the work related to bubble behaviour analysis deals with monodispersed particles, while almost all industrial equipment operates with mixtures of particles. Although considerable work has been done in the past with focus on the analysis of the mixing-segregation behaviour and predictions of fluid dynamics regime transitions, a lack of knowledge exists in the analys…

Settore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciBINARY MIXTURESBUBBLES FLUIDIZATION MIXTUREBubbling fluidized bedbubbling dynamics
researchProduct

Digital Image Analysis Technique for mixing pattern measurements in bi-dispersed 2D gas fluidized beds

2011

This work concerns a new experimental technique based on Digital Image Analysis aimed at the measurement of the mixing behaviour of the granular phase in a 2D fluidized bed. In particular, the preliminary results obtained about the mixing pattern of a bi-disperse 2D gas fluidized bed are reported. Two different kind of particles were fluidized having the same density but different size. The technique is based on suitable colour-field decomposition of the fluidized bed, in which particles of different colours are employed. The technique here proposed can effectively measure the concentration field in the whole bed during operation, thus obtaining data that can be reliably used for CFD simula…

Settore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciDIAT MIXING FLUIDIZED BED
researchProduct

Fluidized Bed Combustion and Gasification of Fossil and Renewable Slurry Fuels

2021

This article provides a comprehensive review of the state of the art and more recent developments of the thermochemical treatments of slurry fuels in fluidized beds (FB). The review focuses on FB combustion and gasification of slurry fuels based on coal, biomass, sludge, and wastes from industry, agriculture, and the civil sector. The investigations at research and industrial levels over the last decades are presented and discussed, highlighting the adopted technological solutions, the results in terms of feasibility and efficiency, and the perspectives of future development. The different behavior between bubbling and circulating beds was addressed, in particular the optimal choice dependi…

TechnologyControl and OptimizationEnergy Engineering and Power TechnologyBiomassgasificationCombustionfluidized bedCoalFluidized bed combustionElectrical and Electronic EngineeringEngineering (miscellaneous)coalbiomassWaste managementRenewable Energy Sustainability and the Environmentbusiness.industryTfluidized bed; slurry fuel; combustion; gasificationRenewable energyFluidized bedSlurryEnvironmental scienceslurrybusinessslurry fuelEnergy (miscellaneous)Renewable resourcecombustion
researchProduct

Trace element behavior in the fluidized bed gasification of solid recovered fuels

2013

Gasification of biomass and recycled fuels is of particular interest for the efficient production of power and heat. Trace elements present as impurities in the product gas should be removed very efficiently. The objective of this work has been to develop and test thermodynamic models for the reactions of trace elements with chlorine and sulfur in the gasification processes of recycled fuels. In particular, the chemical reactions of trace elements with main thermochemical conversion products, main ash components, and bed and sorbent material are implemented into the model. The possibilities of gas cleaning devices in condensing and removing the trace element compounds are studied by establi…

Trace elementsMunicipal solid wasteWaste managementChemistryThermodynamic equilibriumGeneral Chemical EngineeringOrganic ChemistryTrace elementEnergy Engineering and Power TechnologyBiomassgasificationmodeling/dk/atira/pure/sustainabledevelopmentgoals/responsible_consumption_and_productionthermodynamic equilibriumFuel TechnologyImpurityFluidized bedEnvironmental chemistrysolid wasteSDG 12 - Responsible Consumption and ProductionProduct gasta215Fuel
researchProduct

Image Processing and Measurement of the Bubble Properties in a Bubbling Fluidized Bed Reactor

2022

The efficiency of a fluidized bed reactor depends on the bed fluid dynamic behavior, which is significantly influenced by the bubble properties. This work investigates the bubble properties of a bubbling fluidized bed reactor using computational particle fluid dynamic (CPFD) simulations and electrical capacitance tomography (ECT) measurements. The two-dimensional images (along the reactor horizontal and vertical planes) of the fluidized bed are obtained from the CPFD simulations at different operating conditions. The CPFD model was developed in a commercial CPFD software Barracuda Virtual Reactor 20.0.1. The bubble behavior and bed fluidization behavior are characterized form the bubble pro…

VDP::Teknologi: 500Control and OptimizationRenewable Energy Sustainability and the EnvironmentEnergy Engineering and Power TechnologyBuilding and ConstructionElectrical and Electronic Engineeringfluidized bed; bubble diameter; bubble rise velocity; bubble frequency; computational particle fluid dynamic; image processingEngineering (miscellaneous)Energy (miscellaneous)
researchProduct

Simulation of a regeneration plant for spent pickling solutions via spray roasting

2015

Nowadays, pyrohydrolysis techniques are widely applied for regeneration of spent pickling liquors providing an excellent environmental and economical strategy to the problem of waste disposal/recovery, also thanks to the high acid recovery efficiencies (>99%) achieved. In fact, in these processes, iron chlorides are converted into iron oxides and hydrogen chloride at high temperature in spray roasting or fluidized bed reactors. Though the state-of-the-art technologies have been successfully applied only to large-scale plants, the development of small-scale units, able to perform a delocalized regeneration of spent solutions where these latter are actually produced, would be strongly needed …

Waste managementPyrohydrolysis plantWater flowOcean EngineeringHydrochloric acid02 engineering and technology021001 nanoscience & nanotechnologyPollutionProcess simulationchemistry.chemical_compoundProcess simulation; pyrohydrolysis plant; hydrochloric acid regeneration.020401 chemical engineeringchemistryFluidized bedHazardous wasteHydrochloric acid regenerationPicklingEnvironmental scienceHydrochloric acid regeneration0204 chemical engineering0210 nano-technologyWater Science and TechnologyRoastingWaste disposalDesalination and Water Treatment
researchProduct

NO formation tendency characterization for solid fuels in fluidized beds

2013

Abstract Usually the standard fuel analysis is not enough to allow for accurate NO emission predictions in large scale fluidized bed combustion. This paper presents NO formation tendency characterization results from novel laboratory measurements in a small-scale fluidized bed combustor. With the special two-stage oxidation method it is possible to eliminate the observed problems of unstable test conditions during rapid pyrolysis of high-volatile fuels in batch combustion. Experimental results of the conversion of fuel nitrogen to NO are presented for wide range of fuels, ranging from coal-type fuels to peat, biomasses and wastes. A NO formation tendency database is formed based on the resu…

Waste managementbusiness.industryGeneral Chemical EngineeringOrganic ChemistryEnergy Engineering and Power TechnologyCombustionSolid fuelFuel mass fractionnitrogen oxidesFuel Technologyfluidized bed combustionFluidized bedEnvironmental scienceCoalcharacterizationFluidized bed combustionCharbusinessta116Chemical looping combustionsolid fuelfuel nitrogenFuel
researchProduct

On the bubbling dynamics of binary mixtures of powders in 2D gas-solid fluidized beds

2012

Abstract The bubbling behavior of fluidized beds has been thoroughly investigated in the last decades by means of several techniques (e.g. X-ray, Inductance, Resistance and Impedance based techniques). In recent years, Digital Image Analysis Techniques have shown their potential for accurate and cost effective measurements. Most of the works related to the experimental analysis of bubble behavior in the field of gas-solid fluidization actually deal with monodispersed particles although almost all industrial equipments operate with mixtures of particles. Among the works available in literature dealing with mixtures of particles having different diameters and/or densities, most of them aim at…

Work (thermodynamics)Settore ING-IND/26 - Teoria Dello Sviluppo Dei Processi ChimiciMaterials scienceSteady stateFluidized bed Multiphase flow Bubbles Imaging Binary mixtureBUBBLESGeneral Chemical EngineeringBubbleMultiphase flowMixing (process engineering)Binary numberThermodynamicsBINARY MIXTURESMechanicsPhysics::Fluid DynamicsFluidized bedFluidizationMultiphase flowBubbling fluidized bed
researchProduct

Searching for a robust strategy for minimizing alkali chlorides in fluidized bed boilers during burning of high SRF-energy-share fuel

2015

Abstract To meet the increasing volume of waste to be treated via energy recovery, high SRF-energy-share fuel is being fired in conventional waste-to-energy facilities. In this work, corrosion related risk during firing of 70 e-% share (target fuel) is studied and compared against the base case fuel containing 50 e-% share. Cl and S concentration is highest in the target fuel as a direct result of increasing the proportion of SRF in the fuel mixture. Br, Zn and Pb showed the same trend. Meanwhile, the concentration of Na, K, Al and Si are highly dependent on the type of the SRF fired. The corrosion risk of the base and target fuels are analyzed using the composition of the fine aerosol frac…

alkali chloride mitigationEnergy recoveryFlue gascorrosionWaste-to-energyWaste managementGeneral Chemical EngineeringOrganic ChemistryEnergy Engineering and Power TechnologyAerosolCorrosionCorrosionWaste-to-energychemistry.chemical_compoundFuel Technologychemistrywaste-to-energyFluidized bedSRFAlkali chloride mitigationSulfateta215SuperheaterFuel
researchProduct