Search results for "fouling"
showing 10 items of 150 documents
Preparation of novel high permeability and antifouling polysulfone-vanillin membrane
2020
International audience; A novel high-performance nanofiltration membrane was fabricated by a simple and scalable route involving in situ cross-linking of hydrophilic, cheap, and environmentally friendly vanillin as antifouling agent with polysulfone (PSf) for salt rejection performance. Vanillin acts as a porogen, which induces a negative surface charge on the membrane surface due to the presence of polar functional groups like alcohol and aldehyde. The surface properties, including charge, morphology, and hydrophilicity, were investigated in detail using analytical instruments. The nanofiltration performance of the fabricated PSf-vanillin membranes was dependent on the percentage of vanill…
Carbon and nutrient biological removal in a University of Cape Town membrane bioreactor: Analysis of a pilot plant operated under two different C/N r…
2016
Abstract The effect of the carbon-to-nitrogen (C/N) ratio variation in a University of Cape Town Membrane bioreactor (UCT-MBR) was investigated. The experimental campaign was divided into two phases, each characterized by a different C/N ratio (namely, 10 and 5, Phase I and Phase II, respectively). The UCT-MBR pilot plant was analysed in terms of carbon and nutrients removal, biomass respiratory activity, activated sludge features and membrane fouling. The results highlighted that the nutrients removal was significantly affected by the decrease of the C/N ratio during the Phase II. The biological carbon removal was also affected by the low C/N value during the Phase II. Indeed, the average …
Sub-critical filtration conditions of commercial hollow-fibre membranes in a submerged anaerobic MBR (HF-SAnMBR) system: The effect of gas sparging i…
2012
A submerged anaerobic MBR demonstration plant with two commercial hollow-fibre ultrafiltration systems (PURON®, Koch Membrane Systems, PUR-PSH31) was operated using municipal wastewater at high levels of mixed liquor total solids (MLTS) (above 22gL -1). A modified flux-step method was applied to assess the critical flux (J C) at different gas sparging intensities. The results showed a linear dependency between J C and the specific gas demand per unit of membrane area (SGD m). J C ranged from 12 to 19LMH at SGD m values of between 0.17 and 0.5Nm 3h -1m -2, which are quite low in comparison to aerobic MBR. Long-term trials showed that the membranes operated steadily at fluxes close to the est…
Optimising an outdoor membrane photobioreactor for tertiary sewage treatment
2019
[EN] The operation of an outdoor membrane photobioreactor plant which treated the effluent of an anaerobic membrane bioreactor was optimised. Biomass retention times of 4.5, 6, and 9 days were tested. At a biomass retention time of 4.5 days, maximum nitrogen recovery rate:light irradiance ratios, photosynthetic efficiencies and carbon biofixations of 51.7¿±¿14.3¿mg¿N·mol¿1, 4.4¿±¿1.6% and 0.50¿±¿0.05¿kg CO2·m3influent, respectively, were attained. Minimum membrane fouling rates were achieved when operating at the shortest biomass retention time because of the lower solid concentration and the negligible amount of cyanobacteria and protozoa. Hydraulic retention times of 3.5, 2, and 1.5 days …
Factors that affect the permeability of commercial hollow-fibre membranes in a submerged anaerobic MBR (HF-SAnMBR) system
2013
A demonstration plant with two commercial HF ultrafiltration membrane modules (PURON (R), Koch Membrane Systems, PUR-PSH31) was operated with urban wastewater. The effect of the main operating variables on membrane performance at sub-critical and supracritical filtration conditions was tested. The physical operating variables that affected membrane performance most were gas sparging intensity and back-flush (BF) frequency. Indeed, low gas sparging intensities (around 0.23 Nm(3) h(-1) m(-2)) and low BF frequencies (30s back-flush for every 10 basic filtration relaxation cycles) were enough to enable membranes to be operated sub-critically even when levels of mixed liquor total solids were hi…
Production of microalgal external organic matter in a Chlorella-dominated culture: influence of temperature and stress factors
2020
[EN] Although microalgae are recognised to release external organic matter (EOM), little is known about this phenomenon in microalgae cultivation systems, especially on a large scale. A study on the effect of microalgae-stressing factors such as temperature, nutrient limitation and ammonium oxidising bacteria (AOB) competition in EOM production by microalgae was carried out. The results showed non-statistically significant differences in EOM production at constant temperatures of 25, 30 and 35 degrees C. However, when the temperature was raised from 25 to 35 degrees C for 4 h a day, polysaccharide production increased significantly, indicating microalgae stress. Nutrient limitation also see…
A filtration model applied to submerged anaerobic MBRs (SAnMBRs)
2013
The aim of this study was to develop a model able to correctly reproduce the filtration process of submerged anaerobic MBRs (SAnMBRs). The proposed model was calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes. Three suspended components were contemplated in the model: total solids concentration; dry mass of cake on the membrane surface; and dry mass of irreversible fouling on the membrane surface. The model addressed the following physical processes: the build-up and compression of the cake layer during filtration; cake layer removal using biogas sparging to scour the membrane; cake layer removal during back-flushing; and the consoli…
Advanced control system for optimal filtration in submerged anaerobic MBRs (SAnMBRs)
2013
The main aim of this study was to develop an advanced controller to optimise filtration in submerged anaerobic MBRs (SAnMBRs). The proposed controller was developed, calibrated and validated in a SAnMBR demonstration plant fitted with industrial-scale hollow-fibre membranes with variable influent flow and load. This 2-layer control system is designed for membranes operating sub-critically and features a lower layer (on/off and PID controllers) and an upper layer (knowledge-based controller). The upper layer consists of a MIMO (multiple-input-multiple-output) control structure that regulates the gas sparging for membrane scouring and the frequency of physical cleaning (ventilation and back f…
Improved antifouling properties and selective biofunctionalization of stainless steel by employing heterobifunctional silane-polyethylene glycol over…
2016
AbstractA straightforward solution-based method to modify the biofunctionality of stainless steel (SS) using heterobifunctional silane-polyethylene glycol (silane-PEG) overlayers is reported. Reduced nonspecific biofouling of both proteins and bacteria onto SS and further selective biofunctionalization of the modified surface were achieved. According to photoelectron spectroscopy analyses, the silane-PEGs formed less than 10 Å thick overlayers with close to 90% surface coverage and reproducible chemical compositions. Consequently, the surfaces also became more hydrophilic, and the observed non-specific biofouling of proteins was reduced by approximately 70%. In addition, the attachment of E…
Environmental impact of antifouling technologies: state of art and perspectives
2001
1. Marine fouling affects most man-made surfaces temporarily or permanently immersed in the sea, resulting in significant (or substantial) economic costs. Intense research is aimed at preventing or reducing fouling. 2. The most widespread solution to avoid fouling formation is to make surfaces unsuitable for settlers, coating them with antifouling (AF) paints containing toxic compounds. Most AF agents (e.g. tributyltin, (TBT)) have undesirable effects on non-target species, including commercially important organisms. 3. To date, the use of TBT in AF paints has been restricted (but not prohibited) in a number of countries and new biocides are in use. 4. The environmental problems posed to ma…