Search results for "fourier transform infrared spectroscopy"
showing 10 items of 394 documents
Investigation of Acetone Vapour Sensing Properties of a Ternary Composite of Doped Polyaniline, Reduced Graphene Oxide and Chitosan Using Surface Pla…
2020
This work reports the use of a ternary composite that integrates p-Toluene sulfonic acid doped polyaniline (PANI), chitosan, and reduced graphene oxide (RGO) as the active sensing layer of a surface plasmon resonance (SPR) sensor. The SPR sensor is intended for application in the non-invasive monitoring and screening of diabetes through the detection of low concentrations of acetone vapour of less than or equal to 5 ppm, which falls within the range of breath acetone concentration in diabetic patients. The ternary composite film was spin-coated on a 50-nm-thick gold layer at 6000 rpm for 30 s. The structure, morphology and chemical composition of the ternary composite samples were character…
E-beam irradiation and UV photocrosslinking of microemulsion-laden poly(N-vinyl-2-pyrrolidone) hydrogels for ‘‘in situ’’ encapsulation of volatile hy…
2011
Gelled microemulsions are the subject of considerable scientific and commercial interest. Many efforts are currently devoted to improving their toxicological profile and functioning as biocompatible diffusion barrier for the controlled delivery of hydrophobic compounds. In the present investigation, a non-ionic polymeric surfactant was chosen to generate an oil-in-water microemulsion of a model fragrance in the presence of poly(N-vinyl-2-pyrrolidone) (PVP). The microemulsion was then subjected to either electron-beam or UV-irradiation to induce free-radical crosslinking of PVP at low temperature and in the absence of crosslinking agents, catalysts and initiators. Irradiation conditions with…
Direct synthesis of fibrous high molecular weight polyethylene using vanadium catalysts supported on an SiO2ionic liquid system
2015
Polyethylene of fibrous morphology was obtained using Cp2VCl2 and VCl2(salenCl2) catalysts activated by AlEt2Cl and AlEtCl2 and heterogenized on a supported ionic liquid system prepared with SiO2 and 1-(3-triethoxysilyl)propyl-3-methylimidazolium chloroaluminate. The fibre length ranges from 15 to 60 µm, depending on the reaction conditions. The polyethylene is characterized by a high molecular weight ((1.1–2.4) × 106 g mol−1) and a narrow molecular weight distribution (1.4–2.5). It is a linear polymer, properly without branching. The DSC method reveals characteristic changes in melting temperature and crystallinity degree between the first and second scan heating cycles (141 °C and 136 °C,…
Chemical characterization and ultrastructure study of pulp fibers
2020
Abstract Understanding the ultrastructure and chemical characterization of pulp fibers is highly important in utilizing wood as a raw material in a wide scope of applications, such as forest biomass-based biorefineries and low-cost renewable materials. The observation of the ultrastructure is not possible without advanced microscopy and spectroscopy techniques. Therefore, this study focuses on exploring the ultrastructure of pulp fibers with helium ion microscopy (HIM) and scanning electron microscopy (SEM). For the analysis of chemical characterization in the pulp fibers, Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) were pe…
An Innovative Treatment Based on Sodium Citrate for Improving the Mechanical Performances of Flax Fiber Reinforced Composites
2021
The goal of this paper is to evaluate the effectiveness of a cost-effective and eco-friendly treatment based on the use of sodium citrate (Na3C6H5O7) on the mechanical properties of flax fiber reinforced composites. To this scope, flax fibers were soaked in mildly alkaline solutions of the sodium salt at different weight concentration (i.e., 5%, 10% and 20%) for 120 h at 25 °C. The modifications on fibers surface induced by the proposed treatment were evaluated through Fourier transform infrared analysis (FTIR), whereas scanning electron microscope (SEM) and helium pycnometer were used to obtain useful information about composites morphology. The effect of the concentration of the treating …
Accelerated laboratory weathering of polypropylene composites filled with synthetic silicon-based compounds
2019
Abstract Non-functionalized and n-alkyl functionalized polyhedral oligomeric silsesquioxanes (POSS), siloxane-silsesquioxane resins and the sol-gel silicas were for the first time examined as possible UV-stabilizers and/or antioxidants in polypropylene (PP). The obtained composites were subjected to the accelerated laboratory weathering tests. The influence of the weathering conditions on the structure and properties of the PP materials was evaluated on the basis of the results from Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) studies. It was found that weathering resistance of the PP materials was strongly de…
TG/DTA-FTIR as a method for analysis of tall oil based rigid polyurethane foam decomposition gaseous products in a low oxygen environment
2020
Abstract This study is an investigation of the suitability of the thermogravimetry and differential thermal analysis method coupled with Fourier Transform Infrared spectrometry (TG/DTA-FTIR) for a thermal degradation gaseous product analysis of a rigid polyurethane-polyisocyanurate (PU-PIR) foam synthesised from high functionality tall oil fatty acids (TOFA) based polyols. The FTIR spectra of the TG-generated gaseous thermal degradation products of three PU-PIR formulations with varied high functionality TO based polyol content (45, 75 and 95 pbw) and a different tier of isocyanate (NCO) indexes (110, 150, 200, 300 and 400) for each formulation were compared to the spectra of a formulation …
Effect of Polarity of Solvent on Silanization of Halloysite Nanoclay Using (3-Glycidyloxy propyl) Trimethoxy Silane
2021
Abstract: The grafting of silane groups on clay surfaces has been recently investigated in order to fabricate versatile compounds with new potential applications in materials science and ecological engineering. This work explored the influence of variety of solvents with variable polarity on the silanization of halloysite nanoclay (HNT) surface by (3-Glycidyloxy propyl) trimethoxy silane. To this purpose, the functionalization of HNT by 3-Glycidyloxypropyltrimethoxysilane (GOPTMS) has been conducted in Ethanol (polar protic solvent), Tetrahydrofuran (THF) and Acetonitrile (polar aprotic solvents), and Hexane, 1,4-Dioxane and Toluene (non polar solvents). The silane grafted materials were ch…
Influence of Polyvinyl Alcohol (PVA) on PVA-Poly-N-hydroxyethyl-aspartamide (PVA-PHEA) Microcrystalline Solid Dispersion Films
2020
AbstractThis study was conducted to formulate buccal films consisting of polyvinyl alcohol (PVA) and poly-N-hydroxyethyl-aspartamide (PHEA), to improve the dissolution of the drug through the oral mucosa. Ibuprofen sodium salt was used as a model drug, and the buccal film was expected to enhance its dissolution rate. Two different concentrations of PVA (5% w/v and 7.5% w/v) were used. Solvent casting was used to prepare films, where a solution consisting of drug and polymer was cast and allowed to dry. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM) were used to investigate the pr…
Calcium Sulfate Nanoparticles with Unusual Dispersibility in Organic Solvents for Transparent Film Processing
2018
Calcium sulfate is one of the most important construction materials. Today it is employed as high-performance compound in medical applications and cement mixtures. We report a synthesis for calcium sulfate nanoparticles with outstanding dispersibility properties in organic solvents without further functionalization. The nanoparticles (amorphous with small γ-anhydrite crystallites, 5–50 nm particle size) form long-term stable dispersions in acetone without any sign of precipitation. 1H NMR spectroscopic techniques and Fourier-transform infrared spectroscopy (FTIR) reveal absorbed 2-propanol on the particle surfaces that induce the unusual dispersibility. Adding water to the nanoparticle disp…