Search results for "fourier transform infrared spectroscopy"
showing 10 items of 394 documents
Multicommutation ATR-FTIR: determination of sodium alpha-olefin sulfonate in detergent formulations
2004
Abstract The mechanization of attenuated total reflectance measurements (ATR) in Fourier Transform Infrared spectrometry (FTIR) through the use of multicommutation has been evaluated in order to reduce the sample consumption and waste generation also avoiding risks of cells breaking. A new multicommutation ATR-FTIR procedure has been proposed for the determination of sodium alpha-olefin sulfonate (AOS) in liquid detergent formulations. The main advantages of this method are the low consumption of sample (96 ml per 100 determinations) and the analytical throughput (23 h −1 versus 15 h −1 for the manual mode). Results obtained for reference samples containing 7.52% to 9.52% (w/w) of AOS are i…
Stabilisation of LDPE cross-linked in the presence of peroxidesII. FTIR study of chemical changes taking place in the LDPE–dicumyl peroxide–Irganox 1…
2000
Abstract The chemical changes taking place in the systems: LDPE–Irganox 1081, LDPE–dicumyl peroxide and LDPE–Irganox 1081–dicumyl peroxide, after homogenisation (in a rolling mill at 130°C) and after homogenisation and cross-linking (at 180°C and 5.0 MPa for 20 min) were investigated by FTIR. It was found that the OH groups in Irganox 1081 were in a bound form, and were most probably linked to the sulphur co-ordination centre. Further, the presence of dicumyl peroxide without Irganox 1081 in LDPE resulted in the formation of hydroperoxide groups at a temperature of 130°C, which were replaced by free hydroxy and carbonyl groups of a ketonic type after cross-linking. Simultaneous addition of …
Microanalytical method for studying paintings by use of fluorescence spectroscopy combined with principal component analysis
2013
Abstract The study of several different naturally aged films of organic painting materials, is described. Materials studied include drying oils (walnut, poppy seed and linseed oil) resin-based paint varnishes (the triterpenoid dammar and the diterpenoids sandarac and turpentine) and protein-based binding media (egg yolk and casein). A not expensive methodology for a rapid identification of binding media and varnishes, that applies principal component analysis (PCA) to Excitation Emission (EE) fluorescence spectra, is proposed. PCA was performed on a data matrix where the rows represent studied materials and columns the variables; the variables include the fluorescence intensities associated…
Fourier Transform Infrared (FT-IR) Microspectroscopy of 20th Century Russian Oil Paintings: Problem of Dating
2015
Analysis of the IR spectra of samples from 230 Russian oil paintings of the 20th century is used to propose a procedure for the threshold estimation of the age of paintings based on measured parameters (intensity ratios of spectral bands). The bands of compounds that are formed upon interaction of pigment (zinc white) with oil are used for dating.
Characterisation of films and nanopaper obtained from cellulose synthesised by acetic acid bacteria
2016
Bacterial cellulose (BC) samples were obtained using two culture media (glucose and glucose+fructose) and two bacteria (Komagataeibacter rhaeticus and Komagataeibacter hansenii). Nanopaper was obtained from the BC through oxidation and both were studied to determine the impact of culture media and bacteria strain on nanofiber structure and mechanical properties. AFM and SEM were used to investigate fibre dimensions and network morphology; FTIR and XRD to determine cellulose purity and crystallinity; carboxyl content, degree of polymerisation and zeta potential were used to characterise nanofibers. Tensile testing showed that nanopaper has up to 24 times higher Young's modulus (7.39GPa) than…
Effect of Morphology and Size of Halloysite Nanotubes on Functional Pectin Bionanocomposites for Food Packaging Applications
2017
Pectin bionanocomposite films filled with various concentrations of two different types of halloysite nanotubes were prepared and characterized in this study as potential films for food packaging applications. The two types of halloysite nanotubes were long and thin (patch) (200-30 000 nm length) and short and stubby (Matauri Bay) (50-3000 nm length) with different morphological, physical, and dispersibility properties. Both matrix (pectin) and reinforcer (halloysite nanotubes) used in this study are considered as biocompatible, natural, and low-cost materials. Various characterization tests including Fourier transform infrared spectroscopy, field emission scanning electron microscopy, rele…
Phase Transition in Niobophosphate Glass-Ceramic
2011
Phase transition during crystallization of glass to glass-ceramic in system P2O5-CaO-Nb2O5-Na2O was studied. Several heating rates were compared – 1, 2, 5, 11 and 20°Cmin-1. DTA, XRD, FTIR and Raman analyses were performed. Niobophosphate glass-ceramic is found to form utterly different crystalline phases depending on maximal heating temperature, heating rate and time of maximal temperature maintenance. Crystallization temperatures of the same phases are strongly dependent on heating rate, while crystallinity of obtained phases is not. At lower temperatures poorly crystalline phosphates (Ca3(PO4)2, Ca10Na(PO4)7, Ca2P2O7) and niobates (NaNbO3 and Nb2O5) are identified. At higher temperatures…
Mechanism of water adsorption in the large pore form of the gallium-based MIL-53 metal-organic framework
2016
Abstract Water adsorption in the large pore ( lp_empty ) form of Ga-MIL-53 was studied by TGA, DSC and in situ XRD and FTIR at 298 K. The large pore form can be stabilized at room temperature after activation under vacuum at 553 K. The isotherm of water adsorption in this large pore form (pore dimensions: 1.67 × 1.33 nm) is very similar to that measured on the narrow pore ( np_empty ) form (pore dimensions: 1.97 × 0.76 nm). Such a similarity is rather unusual given that the pore sizes of these two phases are very different. In order to understand the origin of this effect in situ XRD and FTIR measurements were particularly helpful. It was found that the adsorption of even small amount of wa…
Study of the influencing effect of pigments on the photoageing of terpenoid resins used as pictorial media
2006
Abstract Terpenoid resins have been mainly used as components of pictorial varnishes and binding media from ancient times. In such latest instances, the resin is mixed with pigments affecting its physical and chemical properties. A new procedure based on gas chromatography–mass spectrometry (GC/MS) has been applied, in this work, in combination with Fourier transform infrared spectroscopy (FTIR), with the aim of determining the changes undergone by di- and triterpenoid resins employed as components of binding media. The GC/MS method is based on the derivatisation of these resins using trimethylsilylimidazol. Characterization of the main components of the di- and triterpenoid fractions and t…
Conformational preferences and synthesis of isomersZandEof oxazole-dehydrophenylalanine
2016
Dehydrophenylalanine, ΔPhe, is the most commonly studied α,β-dehydroamino acid. In nature, further modifications of the α,β-dehydroamino acids were found, for example, replacement of the C-terminal amide group by oxazole ring. The conformational properties of oxazole-dehydrophenylalanine residue (ΔPhe-Ozl), both isomers Z and E, were investigated. To determine all possible conformations, theoretical calculations were performed using Ac-(Z/E)-ΔPhe-Ozl(4-Me) model compounds at M06-2X/6-31++G(d,p) level of theory. Ac-(Z/E)-ΔPhe-Ozl-4-COOEt compounds were synthesized and the conformational preferences of each isomer, Z and E, were investigated using FTIR and NMR-NOE in solutions of increasing p…