Search results for "fourier transform infrared spectroscopy"
showing 10 items of 394 documents
Towards minimization of chlorinated solvents consume in Fourier transform infrared spectroscopy determination of Propamocarb in pesticide formulation…
2008
Abstract A method has been developed for Fourier transform infrared (FTIR) spectroscopy determination of Propamocarb in emulsifiable pesticide concentrate formulations. Five microliter sample was directly injected without any pretreatment in a CHCl 3 stream at 2 mL min −1 into a closed system and the FTIR spectra of sample and standard solutions were obtained using a nominal resolution of 4 cm −1 from 4000 to 900 cm −1 spectral region and accumulating 2 scans per spectrum. Propamocarb determination was based on the measurement of flow injection analysis (FIA) recording height established from FTIR peak area measurements from 1713 to 1703 cm −1 corrected using a baseline defined at 2000 cm −…
From a fixed bed Ag–alumina catalyst to a modified reactor design: how to enhance the crucial heterogeneous–homogeneous reactions in HC-SCR
2004
Abstract A highly active Ag/alumina catalyst for continuous reduction of NO to nitrogen with n-octane under lean conditions was prepared. It was observed in the reactor set-up experiments for optimization of the converter, that surface generated gas phase species are crucial for obtaining high conversion. EPR and matrix isolated FTIR studies at low temperature (10–18 K) were performed for identification of the radicals. Experimental data, observed at steady state conditions in the temperature range 300–550 °C, was used to produce an artificial neural network model of the catalytic converter with four catalyst beds.
Syntheses, spectroscopic and structural properties of phenoxysilyl compounds : X-ray structures, FT-IR and DFT calculations
2013
Abstract The reaction of silicon disulfide with alkylphenols yields tetraphenoxysilane, cyclodisilthiane and silanethiol. The outcome of the reaction depends on the presence of the steric hindrance in the ortho position on the reacting phenol. New products of the reaction of silicon disulfide with phenols are characterized by FT-IR, NMR, X-ray diffraction and DFT calculations. The intramolecular interactions in the compounds are mainly XH---π (X = C, S) whereas the intermolecular interactions are either very weak CH---π/CH---O contacts found in aryloxysilane or electrostatic dipole–dipole attraction in cyclodisilthiane and silanethiol. The S–H---π interactions in the obtained silanethiol ar…
Reactive Surface Coatings Based on Polysilsesquioxanes: Controlled Functionalization for Specific Protein Immobilization
2009
The key designing in reliable biosensors is the preparation of thin films in which biomolecular functions may be immobilized and addressed in a controlled and reproducible manner. This requires the controlled preparation of specific binding sites on planar surfaces. Poly(methylsilsesquioxane)-poly(pentafluorophenyl acrylates) (PMSSQ-PFPA) are promising materials to produce stable and adherent thin reactive coatings on various substrates. Those reactive surface coatings could be applied onto various materials, for example, gold, polycarbonate (PC), poly(tetrafluoroethylene) (PTFE), and glass. By dipping those substrates in a solution of a desired amine, specific binding sites for protein ads…
Self-assembled aggregates of amphiphilic perylene diimide-based semiconductor molecules: effect of morphology on conductivity.
2011
Abstract Two amphiphilic perylenetetracarboxylic diimide derivatives modified with different side chains at imide nitrogen, N- n -hexyl-N′-(2-hydroxyethyl)-1,7-di(4′-t-butyl)phenoxy-perylene-3,4:9,10-tetracarboxylic diimide ( PDI 1 ) and N,N′-di(2-hydroxyethyl)-1,7-di(4′-t-butyl)phenoxy-perylene-3,4:9,10-tetracarboxylic diimide ( PDI 2 ), were fabricated into organic nanostructures via solution-phase self-assembly. Their self-assembling properties in methanol and n -hexane have been comparatively studied by electronic absorption, fluorescence, and Fourier transform infrared spectroscopy (FT-IR). The morphologies and structures of the self-assemblies were examined by scanning electronic micr…
Diode laser spectroscopy of the nu(8) band of the SF(5)Cl molecule.
2003
Abstract Diode laser spectra of SF 5 Cl have been recorded in the ν 8 band region at a temperature of ca. 240 K, a pressure of 0.25 mbar and an instrumental bandwidth of ca. 0.001 cm −1 . Four regions have been studied: a first one in the P -branch (906.849–907.687 cm −1 ), a second one in the Q -branch (910.407–910.944 cm −1 ), and two other ones in the R -branch (913.957–914.556 and 917.853–918.705 cm −1 ). The whole ν 1 / ν 8 dyad of SF 5 35 Cl has been previously recorded in the group of Professor H. Burger in Wuppertal, thanks to a Fourier transform infrared spectrometer [J. Mol. Spectrosc. 208 (2001) 169]. These data have thus been combined with our diode laser ones in the aim of refi…
Halloysite nanotubes filled with salicylic acid and sodium diclofenac: effects of vacuum pumping on loading and release properties
2021
AbstractIn this work, we investigated the effects of the vacuum pumping on both the loading efficiencies and the release kinetics of halloysite nanotubes filled with drug molecules dissolved in ethanol. As model drugs, salicylic acid and sodium diclofenac were selected. For comparison, the loading of the drug molecules was conducted on platy kaolinite to explore the key role of the hollow tubular morphology on the filling mechanism of halloysite. The effects of the pressure conditions used in the loading protocol were interpreted and discussed on the basis of the thermodynamic results provided by Knudsen thermogravimetry, which demonstrated the ethanol confinement inside the halloysite cavi…
Reactivity of cellulose during hydrothermal carbonization of lignocellulosic biomass
2020
Abstract Hydrothermal carbonization (HTC) of pure cellulose (CE) and birchwood (BW) samples was carried out at temperatures between 160 and 280 °C, 0.5 h residence time and biomass-to-water ratio 1:5, to investigate the reactivity of cellulose in lignocellulosic biomass. Thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) showed that the CE samples remained unaltered at temperatures up to 220 °C, but were significantly decomposed at 230 °C producing a thermal recalcitrant aromatic and high energy-dense material. FTIR showed that dehydration and aromatization reactions occurred at temperature equal or higher than 230 °C for the CE samples while a similar incre…
Evaluation of wood-polyethylene composites biodegradability caused by filamentous fungi
2017
Abstract This study describes the impact of filamentous fungi on wood-polymer composites (WPCs) containing various types of fillers (coniferous, deciduous, cellulose) in the amount of 30 wt.% to 50 wt.%. The selection of fungal strain of filamentous fungi was performed prior to the study on the impact of the wood type on the progress of WPCs biodegradability. The changes associated with various water absorption of the examined WPCs, were observed using scanning electron microscopy (SEM). The impact of fungal mycelium, which had affected the changes in WPCs material, was examined using thermogravimetric analysis (TG). The results showed, that the growth of mycelium on WPCs, influenced mainly…
Rapid synthesis of tin (IV) oxide nanoparticles by microwave induced thermohydrolysis
2008
Abstract Tin oxide nanopowders, with an average size of 5 nm, were prepared by microwave flash synthesis. Flash synthesis was performed in aqueous solutions of tin tetrachloride and hydrochloric acid using a microwave autoclave (RAMO system) specially designed by the authors. Energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), Brunauer–Emmett–Teller (BET) surface area analysis, nitrogen adsorption isotherm analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM), were used to characterize these nanoparticles. Compared with conventional synthesis, nanopow…