Search results for "fracture mechanic"
showing 10 items of 108 documents
Crack dynamics and crack surfaces in elastic beam lattices
1998
The dynamics of propagating cracks is analyzed in elastic two-dimensional lattices of beams. At early times, inertia effects and static stress enhancement combine so that the crack-tip velocity is found to behave as t1/7. At late times a minimal crack-tip model reproduces the numerical simulation results. With no disorder and for fast loading, a “mirror-mist-mirror” crack-surface pattern emerges. Introduction of disorder leads, however, to the formation of the “mirror-mist-hackle”–type interface typical in many experimental situations. Peer reviewed
Simulation of propagation characteristics of ultrasonic guided waves in fractured long bone
2008
Using ultrasonic guided waves (GW) to assess fractures in long bones has gained considerable attention. This paper focuses on using an improved hybrid boundary element method (HBEM) to analyze and calculate reflection coefficients (RC) and transmission coefficients (TC) of low-order GWs for cracks with different depth-to-width ratios (d/w) in fractured long bones. The results showed that the primary received modes, which include the transmitted and reflected modes, are the same as the incident modes. For some values of d/w, the TC of different GW always had local maxima at adjacent frequencies. For some other cracks with different d/w, most of the TC curves had local maxima of which frequen…
Dynamic fragmentation of a two-dimensional brittle material with quenched disorder
1997
Fragmentation of a two-dimensional brittle material caused by a rapid impact has been analyzed. Computer simulations together with simple arguments are used to obtain a qualitative understanding of crack formation, which is then used to derive an exponential fragment size distribution valid in the large fragment size limit. In the limit of small fragments this distribution is solved numerically, and it is found to obey a scaling law with the exponent {minus}1.5. These results suggest that two different mechanisms are operative in the fragmentation process: branching of propagating cracks determines the small fragment size limit, and merging of the nucleated cracks determines the large size …
A boundary element model for piezoelectric dynamic strain sensing of cracked structures
2011
A piezoelectric sensor model is here presented for the Structural Health Monitoring (SHM) of damaged structures. A boundary element approach based on the Dual Reciprocity BEM is then used to model and analyze the transient response of a piezoelectric patch bonded on a cracked beam. The BE model is written for the piezoelectric problem employing generalized displacements. The multidomain boundary element technique is implemented to model non-homogeneous and cracked configuration, taking contact conditions into account. Analyses have been carried out for an isotropic beam with a piezoelectric strip attached on it and dynamical results for the undamaged structure have been compared with FE res…
Design and use of a Fatigue Test Machine in Plane Bending for Composite Specimens and Bonded Joints
2011
Polymeric and composites materials are increasingly used in industry as structural parts, so that specific information on their mechanical properties "at long term" (creep, relaxation, fatigue) are requested. The design and implementation of these components also requires that they are permanently connected together to perform certain functions. The use of adhesives in structural joints has increased over recent years thanks to the continuous development by companies which provide the market with adhesive having better and better mechanical properties. The main areas relate to the aerospace, aeronautical and automotive industries, where requirements are required for lightness and reliabilit…
Fracture Toughness of PIR Foams Produced from Renewable Resources
2012
Rigid low-density closed-cell polyisocyanurate (PIR) foams are used primarily as a thermal insulation material. Traditionally, they are manufactured from constituents produced by petrochemical industry. Introducing renewable materials in PIR formulation brings definite economical and environmental benefits. Fracture toughness of PIR foams obtained from renewable resources (with the polyol system comprising up to 80% of rapeseed oil esters) and petrochemical PIR foams has been characterized experimentally, by compact tension tests, for mode I crack propagation along the rise direction of the foams.
Internal spring distribution for quasi brittle fracture via Symmetric Boundary Element Method
2009
Abstract In this paper the symmetric boundary element formulation is applied to the fracture mechanics problems for quasi brittle materials . The basic aim of the present work is the development and implementation of two discrete cohesive zone models using Symmetric Galerkin multi-zone Boundary Elements Method . The non-linearity at the process zone of the crack will be simulated through a discrete distribution of nodal springs whose generalized (or weighted) stiffnesses are obtainable by the cohesive forces and relative displacements modelling. This goal is reached coherently with the constitutive relation σ − Δ u that describes the interaction between mechanical and kinematical quantities…
On the transient response of actively repaired damaged structures by the boundary element method
2010
The transient fracture mechanics behavior of damaged structures repaired through active piezoelectric patches is presented in this paper. The analyses have been performed through a boundary element code implemented in the framework of piezoelectricity to take account of the coupling between the elastic and the electric fields, which represents the peculiar feature of piezoelectric media. The multi-domain technique has been also involved to assemble the host structures and the active patches and to model the cracks. Moreover, the patches have been considered elastically bonded to the damaged structure by means of a zero thickness adhesive layer. This has been achieved through the implementat…
Modelling unilateral damage effect in strongly anisotropic materials by the introduction of the loading mode in damage mechanics
1999
Abstract Damage weakens the mechanical characteristics of materials. But this weakening can disappear if the cracks close again: this is called the unilateral effect of damage. We propose a model of this phenomenon using damage mechanics in the case of a diffuse network of identical microcracks. The microcracks state is defined with two internal state variables. These two variables are control parameters of the geometry of the microcracks. They also define the loading mode in damage mechanics as in fracture mechanics. In order to limit the anisotropy induced by the microcracks, hence by the loading, we suppose that the geometry of damage spreads into preferential directions. Therefore, this…
Fatigue crack growth in welds based on a V-notch model for the short crack propagation at the toe
2018
Abstract This work presents a new fatigue crack growth prediction model for non-load-carrying fillet welded steel joints. For this joint configuration the fatigue cracks will emanate from the weld toe region. Due to the presence of a V-notch in this region the crack initiation point becomes a point of singularity for the stress field. This may in many cases make it difficult to determine the Stress Intensity Factor Range (SIFR) for small cracks by conventional methods based on Linear Elastic Fracture Mechanics (LEFM). The present approach solves this problem by using the Energy Release Rate (ERR) to determine the SIFR in the small crack growth regime. The model is fitted to crack growth cur…