Search results for "frp"
showing 10 items of 92 documents
Robotic geometric and volumetric inspection of high value and large scale aircraft wings
2019
Increased demands in performance and production rates require a radical new approach to the design and manufacturing of aircraft wings. Performance of modern robotic manipulators has enabled research and development of fast automated non-destructive testing (NDT) systems for complex geometries. This paper presents recent outcomes of work aimed at removing the bottleneck due to data acquisition rates, to fully exploit the scanning speed of modern 6-DoF manipulators. The geometric assessment of the parts is carried out with a robotised dynamic laser scanner encoded through an absolute laser tracker. This method allows scanning speeds up to 330mm/s at 1mm pitch. State of the art ultrasonic ins…
Fast ultrasonic phased array inspection of complex geometries delivered through robotic manipulators and high speed data acquisition instrumentation
2016
Performance of modern robotic manipulators has enabled research and development of fast automated non-destructive testing (NDT) systems for complex geometries. This paper presents recent outcomes of work aimed at removing the bottleneck due to data acquisition rates, to fully exploit the scanning speed of modern 6-DoF manipulators. State of the art ultrasonic instrumentation has been integrated into a large robot cell to enable fast data acquisition, high scan resolutions and accurate positional encoding. A fibre optic connection between the ultrasonic instrument and the server computer enables data transfer rates up to 1.6GB/s. Multiple data collection methods are compared. Performance of …
A Mechanical Approach for Evaluating the Distribution of Confinement Pressure in FRP-Wrapped Rectangular Columns
2019
In recent decades, fiber reinforced polymer (FRP) wrapping has become a common technique to retrofit reinforced concrete (RC) columns. Numerous research works have sought to verify analytically and experimentally its effectiveness in terms of enhancement of axial load bearing capacity and ductility. These studies highlighted that in the case of sharp-cornered sections, the maximum allowable confinement pressure is limited by premature failure at corners and, consequently, stress in the FRP, as well as the distribution of the confinement pressure, is not uniform. The prediction of this phenomenon is not straightforward, and existing theoretical studies propose complex numerical simulations, …
Modelling of FRP and FRCM-Confined Masonry Columns: Critical Review for Design and Intervention Strategies
2022
This paper presents a critical review of the most established analytical models for the prediction of the compressive strength of FRP and FRCM-confined masonry columns. In particular, two types of fibres are analysed, i.e. glass and basalt. A wide dataset available in the literature is used for the application of the analytical models and for the development of parametric analyses useful for the critical comparison of FRP vs. FRCM confinement technique and glass vs. basalt fibres to be adopted as reinforcement of masonry substrate. The effects of stiffness and strength of the reinforcement, the number of reinforcing layers, the compressive strength of masonry and the cross-section shape are…
Flax, Basalt, E-Glass FRP and Their Hybrid FRP Strengthened Wood Beams: An Experimental Study
2019
In this study, the structural behavior of small-scale wood beams externally strengthened with various fiber strengthened polymer (FRP) composites (i.e., flax FRP (FFRP), basalt FRP (BFRP), E-glass FRP (&ldquo
Tensile behaviour of anti-symmetric CFRP composite
2011
Abstract This paper addresses the response of a 17-ply anti-symmetric carbon/epoxy composite subjected to uniaxial tensile loading. Hashin ply damage model is adopted to describe the damage behaviour of the plies, whereas damage initiation and progression of the interfaces are characterised by mixed-mode cohesive damage model. Force-displacement curves obtained numerically and experimentally show good agreement. Results show that all laminae and interfaces experience the damage except laminae with 0o fibre. In addition, damage is concentrated at the tab and central regions of the tensile specimen. Edge delamination is observed in all interfaces.
TENACITÀ ALLA FRATTURA INTERLAMINARE DI COMPOSITI CFRP SOTTOPOSTI A PROCESSI DI INVECCHIAMENTO IDROTERMICO
2011
In questo lavoro si è condotto uno studio degli effetti dell’invecchiamento idrotermico sulla tenacità alla frattura interlaminare in Modo I di laminati in composito CFRP con lay-up unidirezionale. I pannelli realizzati impiegano una resina epossidica DGEBA. Provini DCB sono stati ricavati in accordo con la norma ASTM D5528. Prove dinamico meccaniche DMTA sono state condotte per analizzare l’influenza dell’invecchiamento sulla temperatura di transizione vetrosa, e quindi sul grado di fragilità della matrice. Il lavoro descrive il set-up sperimentale per la determinazione delle Curve R, evidenziando l’influenza della morfologia del tessuto in carbonio. I valori di GIC di innesco e di propaga…
Experimental investigation on the compressive behavior of short-term preloaded carbon fiber reinforced polymer-confined concrete columns
2017
Strengthening of concrete columns with fiber reinforced polymer sheets provides a good improvement to the existing structural members in terms of load and strain capacity due to the properties of the composite jacket. A proper knowledge of the load–strain response of the composite members is necessary to design retrofitting intervention of existing structures; however, so far the available design methods do not allow to take into account the effect of the possible presence of service loads on the compressive behavior of the reinforced columns. An experimental investigation on the compressive behavior of preloaded circular concrete columns reinforced with carbon fiber reinforced polymer was …
Numerical and Experimental Analysis of the Frictional Effects on 4ENF Delamination Tests Performed on Unidirectional CFRP
2015
Abstract Progressive delamination in composite materials under static or fatigue loading condition are, in many structures, one of the predominant cause of failure. In the paper, an accurate study of quasi-static delamination growth under mode II loading condition is conducted. Several experimental tests are performed on composite laminates consisting of unidirectional carbon/epoxy layers. Four-point end-notched flexure (4ENF) test is employed in order to characterize the mode II interlaminar fracture toughness. The R-curve is obtained by means of optical and numerical determination of crack tip position. The energy release rate and the crack length are calculated through experimental deter…
Experimental investigation on the effectiveness of basalt-fibre strengthening systems for confining masonry elements
L’impiego di materiali compositi per il rinforzo di colonne in muratura è diventato una pratica ampiamente diffusa nel corso degli ultimi decenni. Questa tecnica, che consiste generalmente nell’applicazione di materiali polimerici fibrorinforzati (Fibre Reinforced Polymer-FRP), ha mostrato buone potenzialità, essendo in grado di garantire notevoli incrementi di resistenza e duttilità dell’elemento rinforzato, grazie ad un’azione di confinamento passivo. Tuttavia, l’impiego di compositi a matrice polimerica presenta alcuni limiti legati soprattutto alle prestazioni delle resine epossidiche, che a causa della loro natura sintetica danno luogo a problemi di compatibilità con il supporto murari…