Search results for "frp"
showing 10 items of 92 documents
Comparative experimental analysis on the compressive behaviour of masonry columns strengthened by FRP, BFRCM or steel wires
2017
Abstract In the last decade, several studies have investigated the application of Fibre Reinforced Polymer (FRP) wraps to masonry piers in order to provide a confinement effect and enhance compressive strength and ductility. Although this technique has proved to be quite effective, various drawbacks arise when organic resins are used to bind fibres. To solve these problems, different techniques have been developed to be used as alternative methods for enhancing the structural performances of weak masonry columns. Among these, the use of Basalt Fibre Reinforced Cementitious Matrix (BFRCM) wrapping, or the application of steel wires at mortar joints. This paper presents the results of an expe…
Compressive behavior of FRP externally wrapped R.C. column with buckling effects of longitudinal bars
2018
Abstract In this paper, a calculation model to simulate the compressive behavior of R.C. columns with square cross-sections externally wrapped with FRP, including buckling effects of the longitudinal bars and reduction of the confinement pressure induced by the buckled compressed bars, is presented and discussed. The model distinguishes the cases of corner and side bars, calculating the different critical lengths and the critical loads. The Teng et al. (2009) model was adopted to predict the compressive behavior of FRP-confined concrete, and the Dhakal and Maekawa (2002) model was taken into account to predict the compressive behavior of longitudinal bars. The critical length and critical s…
Flexural behaviour of glulam timber beams reinforced with FRP cords
2015
Abstract Glued laminated timber (glulam) is widely used as a construction material to make up lightweight and large span structures. The basic principle of this material consists in bonding together a number of layers of dimensioned timber with structural adhesives, in order to increase strength and stiffness of the member, and allowing to make up sustainable structures with great visual impact. Recent applications showed the effectiveness of fibre-reinforced polymer (FRP) composites in enhancing the structural performances of glulam beams, with particular reference on their flexural and shear strength. In fact FRP reinforcements could be used to strengthen existing structures or to reduce …
A strategy for the finite element modeling of FRP-confined concrete columns subjected to preload
2018
Abstract Compressive behavior of columns strengthened by means of an outer elastic confinement provided e.g. by fiber-reinforced polymer (FRP) jackets has become a main topic in the field of structural retrofitting. In details, the problem of the response assessment of strengthened columns is still under study. Many analytical formulations have been proposed to describe the compressive behavior of confined concrete under both monotonic and cyclic loads. However, the effect of a stress/strain level in the columns already present prior to apply the confinement has been generally neglected until now, also because of the lack of well defined strategies of modeling. In this frame, here, (1) a FE…
Analytical stress-strain law of FRP confined masonry in compression: Literature review and design provisions
2017
Abstract The use of Fibre Reinforced Polymer (FRP) wraps has become common in practical applications to retrofit existing columns with poor structural features. Wrapping the member with one or more FRP sheets makes it possible to induce confinement action and enhance strength and ductility. This application has been widely studied and adopted in reinforced concrete members for about twenty years, while its suitability to masonry columns and piers has been investigated during the last decade. The results of several studies were summarized in different design expressions for calculating effective confinement pressure, ultimate compressive stress and strain, and the overall trend of the stress…
Finite element analysis of the out-of-plane behavior of FRP strengthened masonry panels
2017
Abstract In the present study a numerical model is proposed for the response of out-of-plane loaded calcarenite masonry walls strengthened with vertical CFRP strips applied on the substrate by means of epoxy resin. A simplified structural scheme is considered consisting in a beam fixed at one end, subjected to constant axial load and out-of-plane lateral force monotonically increasing. Two different constraint conditions are taken into account: in the first one, the panel is assumed free to rotate at the top end while, in the second one, the rotation is restrained. Three-dimensional finite elements are used for the calcarenite parts and an equivalent constitutive law available in the litera…
Discontinuous FRP-Confinement of Masonry Columns
2020
Recent seismic events, all over the world, demonstrated that masonry constructions are prone to brittle collapses when shear or compression capacity is reached. It is clear that, in many real cases, masonry columns need to be strengthened for enhancing their load-carrying capacity and to develop a more ductile response. The Fiber Reinforced Polymers (FRPs) confinement of masonry columns is a well-known technique that may produce these advantages. Unfortunately, full-wrapping insulates the column from the environment; so interstitial humidity can easily occur and cause the acceleration of the masonry's decay. In order to prevent it, partial-confinement is commonly assessed instead of total-j…
Shear Capacity Model with Variable Orientation of Concrete Stress Field for RC Beams Strengthened by FRP with Different Inclinations
2021
A design-oriented analytical model able to evaluate the shear capacity of reinforced concrete (RC) beams strengthened with fiber-reinforced polymer (FRP) sheets or strips oriented in any direction is proposed. The formulation of the model is based on the variable-inclination stress-field approach, aiming to extend the provisions of current European standards to beams strengthened in shear using FRP. The main novelty of the model lies in taking into account the possible different inclination of steel stirrup and FRP reinforcement in determining the orientation of a compressed concrete stress field, and in shear strength evaluation, overcoming the approximation of the known models with variab…
Effects of Nylon 6,6 Nanofibrous Mats on Thermal Properties and Delamination Behavior of High Performance CFRP Laminates
2014
none 8 no Nylon 6,6 electrospun nanofibrous membranes interleaved in Carbon Fibre Reinforced Plastic (CFRP) laminates have been proposed as a means to provide a higher threshold value to delamination on structural sites where composites are more prone to develop such failure. A model, highly crosslinked thus inherently brittle, epoxy matrix was selected for its high Young’s modulus and glass transition temperature exceeding 250 °C. The influence of the Nylon 6,6 nanofibres on the curing behaviour of the matrix and on the thermal and dynamic mechanical properties of the cured resin was investigated. These properties were related to the features of the epoxy resin and of the resin impregnated…
Matrix and Filler Recycling of Carbon and Glass Fiber-Reinforced Polymer Composites: A Review
2021
Fiber-reinforced polymers (FRPs) are low-density, high-performance composite materials, which find important applications in the automotive, aerospace, and energy industry, to only cite a few. With the increasing concerns about sustainability and environment risks, the problem of the recycling of such complex composite systems has been emerging in politics, industry, and academia. The issue is exacerbated by the increased use of FRPs in the automotive industry and by the expected decommissioning of airplanes and wind turbines amounting to thousands of metric tons of composite materials. Currently, the recycling of FRPs downcycles the entire composite to some form of reinforcement material (…