Search results for "fuel"

Photoelectrochemical characterization of anatase-rutile mixed TiO2 nanosponges

2016

This work studies the influence of using hydrodynamic conditions during anodization on the morphology and electrochemical properties of anatase/rutile mixed TiO2 nanotubes (Reynolds number, Re = 0) and nanosponges (Re > 0). To this purpose different techniques were used, such as: microscopy techniques (Field-Emission Scanning Electron Microscope, FE-SEM, and Confocal Laser-Raman Spectroscopy), Electrochemical Impedance Spectroscopy (EIS), Mott Schottky (MS) analysis and photoelectrochemical water splitting tests. This investigation demonstrates that the morphology of TiO2 nanostructures may be greatly affected due to the hydrodynamic conditions and it can be adjusted in order to increase th…

Towards a microbial thermoelectric cell.

2013

Microbial growth is an exothermic process. Biotechnological industries produce large amounts of heat, usually considered an undesirable by-product. In this work, we report the construction and characterization of the first microbial thermoelectric cell (MTC), in which the metabolic heat produced by a thermally insulated microbial culture is partially converted into electricity through a thermoelectric device optimized for low ΔT values. A temperature of 41°C and net electric voltage of around 250–600 mV was achieved with 1.7 L baker’s yeast culture. This is the first time microbial metabolic energy has been converted into electricity with an ad hoc thermoelectric device. These results might…

Anodic Alumina Membranes for Fuel Cell Technology and Nanostructure Template -assisted Deposition

2009

Sorption characteristics of heavy metal ions by a natural zeolite

2005

Zeolites have been shown to be effective adsorbents for the removal of heavy metals from aqueous solutions. A natural material from Cuba, containing zeolite, has been used for the removal of several metal ions, namely Cu2+, Zn2+, and Ni2+, to evaluate its potential use as a low-cost adsorbent. Batch experiments have been conducted to evaluate the process kinetics and the removal equilibrium at different pH values, metal and zeolite concentrations. Pseudo-second order kinetics and Freundlich equilibrium parameters have been obtained. Results suggested that this natural zeolite has a high potential for heavy metal retention. The selectivity of the studied metals was determined as Cu2+ ≫ Zn2+ …

Ionic liquids versus amine solutions in biogas upgrading: the level of volatile organic compounds

2013

Background: This article provides information related to the occurrence of volatile organic compounds before and after biogas purification, by means of both aqueous amine solutions and ionic liquids. Results & discussion: Encouraging results were obtained. Under the experimental conditions, 1-butyl-3-methylimidazolium acetate ionic liquid appeared to perform at least two-times better than aqueous amines solutions, since it captured 65 wt% of the identified volatile organic compounds, while aqueous amine solutions retained around 35 wt% only. However, in the case of octamethylcyclotetrasiloxane and dichlorobenzene, aqueous amine solutions rendered better purification performance and diminish…

Evaluation of biosorbents for Cu removal from wastewater in the presence of EDTA

2007

BACKGROUND: This paper evaluates the use of several biosorbents for Cu removal from aqueous solutions in the absence and presence of ethylenediaminetetraacetic acid (EDTA). The objective was to determine the applicability of the sorption process after conventional physicochemical wastewater treatment, or as primary treatment, replacing the physicochemical process. RESULTS: Fixed-bed experiments were performed at Cu influent concentrations of 2 and 20 mg dm−3 and EDTA doses between 0 and 10 mg dm−3. At low Cu concentration without EDTA, Cu uptake capacity followed the order Posidonia oceanica > chitosan > chitin > Scharlau AC > Darco AC, with a maximum, at C/C0 = 0.2, of 23.2 mg g−1. In the …

Photocatalytic formation of H2 and value-added chemicals in aqueous glucose (Pt)-TiO2 suspension

2016

Abstract Commercial and home prepared bare and Pt-supported TiO2 samples were used as the photocatalysts for the aqueous photo-conversion of glucose at ambient pressure and temperature. Aerobic and anaerobic conditions were used to study the products of glucose degradation both in the liquid (arabinose, erythrose, gluconic acid, glucaric acid, fructose and formic acid) and gaseous (H2 and CO2) phases. The distribution of these molecules was different in the presence of the various powders, depending on the structural and physico-chemical properties of the materials, and Pt resulted essential for the anaerobic production of H2. The home prepared samples resulted more active than the commerci…

Deep learning strategies for automatic fault diagnosis in photovoltaic systems by thermographic images

2021

Abstract Losses of electricity production in photovoltaic systems are mainly caused by the presence of faults that affect the efficiency of the systems. The identification of any overheating in a photovoltaic module, through the thermographic non-destructive test, may be essential to maintain the correct functioning of the photovoltaic system quickly and cost-effectively, without interrupting its normal operation. This work proposes a system for the automatic classification of thermographic images using a convolutional neural network, developed via open-source libraries. To reduce image noise, various pre-processing strategies were evaluated, including normalization and homogenization of pi…

2021

Abstract. Sustainable aviation fuels can reduce contrail ice numbers and radiative forcing by contrail cirrus. We measured apparent ice emission indices for fuels with varying aromatic content at altitude ranges of 9.1–9.8 and 11.4–11.6 km. Measurement data were collected during the ECLIF II/NDMAX flight experiment in January 2018. The fuels varied in both aromatic quantity and type. Between a sustainable aviation fuel blend and a reference fuel Jet A-1, a maximum reduction in apparent ice emission indices of 40 % was found. We show vertical ice number and extinction distributions for three different fuels and calculate representative contrail optical depths. Optical depths of contrails (0.…

Aircraft type influence on contrail properties

2013

The investigation of the impact of aircraft parameters on contrail properties helps to better understand the climate impact from aviation. Yet, in observations, it is a challenge to separate aircraft and meteorological influences on contrail formation. During the CONCERT campaign in November 2008, contrails from 3 Airbus passenger aircraft of types A319-111, A340-311 and A380-841 were probed at cruise under similar meteorological conditions with in situ instruments on board DLR research aircraft Falcon. Within the 2 min-old contrails detected near ice saturation, we find similar effective diameters Deff (5.2–5.9 μm), but differences in particle number densities nice (162–235 cm−3) and…