Search results for "gold"
showing 10 items of 1320 documents
Stable anchoring of dispersed gold nanoparticles on hierarchic porous silica-based materials
2010
The nanometric organization of MOx (M = Co, Zn, Ni) domains partially embedded inside the mesoporous silica walls but accessible to the pore voids, which is achieved through a simple one-pot surfactant-assisted procedure, define optimal anchors for the nucleation and growth of gold nanoparticles, which in turn favours an exceptional thermal stability for the final Au-supported materials. As silica support we have selected a UVM-7 silica having a highly accessible architecture defined by two hierarchic pore systems. The combination of nanometric pore length, tortuous mesopores and MOx inorganic anchors favours the stability of the final Au/CoOx-UVM-7 nanocomposites.
Ag and Au/DNQ-novolac nanocomposites patternable by ultraviolet lithography: a fast route to plasmonic sensor microfabrication
2010
In this work we report on a method to synthesize Ag–Au nanoparticles/polymer nanocomposite patterns by UV lithography. The photoresists are based on DNQ-novolac as the polymer matrix, and Ag(I) and Au(III) salts as the nanoparticle precursors. After UV lithography, silver and gold nanoparticles are in situ synthesized inside the polymer patterns during a post bake. The resulting structured nanocomposite shows a characteristic absorbance spectrum related to the plasmon frequency of the synthesized noble metal NPs. This method represents a fast, simple and low-cost approach to the formation of extended polymer patterns with embedded silver or gold NPs. Moreover, it is a mechanism to position …
Thermal stability of Au–TiO2 nanocomposite films prepared by direct liquid injection CVD
2015
Abstract Nanocomposite films composed of gold nanoparticles (AuNPs) embedded in a TiO 2 matrix have been prepared by direct liquid injection chemical vapor deposition process, using preformed nanoparticles and titanium isopropoxide as precursors. The spherical AuNPs about 4.1 nm in diameter were synthesized by using gold (III) chloride trihydrate and stabilized by thiol ligands. The depositions were carried out by performing at first oxide deposition, then gold nanoparticle one and capping with oxide. The morphology, structure; the chemical state and optical properties of nanocomposite films were characterized by scanning electron microscopy, Raman, X-ray photoelectron and UV–Vis absorption…
Atomically Precise Gold Nanoclusters: Towards an Optimal Biocompatible System from a Theoretical-Experimental Strategy.
2021
Potential biomedical applications of gold nanoparticles have increasingly been reported with great promise for diagnosis and therapy of several diseases. However, for such a versatile nanomaterial, the advantages and potential health risks need to be addressed carefully, as the available information about their toxicity is limited and inconsistent. Atomically precise gold nanoclusters (AuNCs) have emerged to overcome this challenge due to their unique features, such as superior stability, excellent biocompatibility, and efficient renal clearance. Remarkably, the elucidation of their structural and physicochemical properties provided by theory-experiment investigations offers exciting opport…
Surface plasmon subwavelength optics.
2003
International audience; Surface plasmons are waves that propagate along the surface of a conductor. By altering the structure of a metal's surface, the properties of surface plasmons- in particular their interaction with light-can be tailored, which offers the potential for developing new types of photonic device. This could lead to miniaturized photonic circuits with length scales that are much smaller than those currently achieved. Surface plasmons are being explored for their potential in subwavelength optics, data storage, light generation, microscopy and bio-photonics.
Nonlinear Transport in Hybrid Polypyrrole–Gold Nanostructures
2010
We have studied charge transport in nanometer scale films of polypyrrole (PPy) that were grown electrochemically onto discontinuous ultrathin films of gold. The gold films consisted of 100 nm size islands, separated from each other by nanometer-size gaps. The thickness of PPy can be varied from 30 to 200 nm. The I-V characteristics of these hybrid PPy-Au nanostructures show strong non-linearity at low temperatures, and in particular for the more insulating samples. The hopping transport is further verified from the log / versus V-1/4 plots. Furthermore, the I-V data follow an empirical relation dlog//dV(1/4) similar to T-1/2.
Synthesis and physico-chemical characterization of gold nanoparticles softly coated by AOT
2006
Size-controlled gold nanoparticles/surfactant stable systems were prepared by the combined action of the solvated metal atom dispersion (SMAD) technique and confinement in anhydrous sodium bis(2-ethylhexyl)sulfosuccinate (AOT) micellar solution. From liquid samples, by evaporation of the organic solvent, solid gold nanoparticle-surfactant liquid crystals composites were obtained. Sample characterization was performed by X-ray diffraction (SAXS and WAXS), XPS spectroscopy and UV-vis-NIR spectroscopy. All experimental data consistently revealed the coexistence of two gold nanoparticle size populations: bigger nanoparticles (size 20-50 angstrom) and smaller ones (size of few angstrom). The two…
Synthesis and physico-chemical characterization of Au/TiO2 nanostructures formed by novel "cold" and "hot" nanosoldering of Au and TiO2 nanoparticles…
2011
Abstract A novel approach to synthesize Au/TiO2 nanostructures with interesting optical properties is presented and discussed. It is based on the nanoparticle “cold” or “hot” nanosoldering occurring when two water suspensions of Au and TiO2 nanoparticles are merely mixed at room temperature or laser irradiated after mixing. Thanks to the high fraction and mutual reactivity of surface species, immediately after the mixing process, the encounters between Au and TiO2 nanoparticles in liquid phase are enough for “cold” nanosoldering of gold nanoparticles onto TiO2 nanoparticles to occur. The optical characterizations show that this fast process (timescale less than 1 min) is followed by a slowe…
0.48Tb/s (12x40Gb/s) WDM transmission and high-quality thermo-optic switching in dielectric loaded plasmonics
2012
We demonstrate Wavelength Division Multiplexed (WDM)-enabled transmission of 480Gb/s aggregate data traffic (12x40Gb/s) as well as high-quality 1x2 thermo-optic tuning in Dielectric-Loaded Surface Plasmon Polariton Waveguides (DLSPPWs). The WDM transmission characteristics have been verified through BER measurements by exploiting the heterointegration of a 60 mu m-long straight DLSPPW on a Silicon-on-Insulator waveguide platform, showing error-free performance for six out of the twelve channels. High-quality thermo-optic tuning has been achieved by utilizing Cycloaliphatic-Acrylate-Polymer as an efficient thermo-optic polymer loading employed in a dual-resonator DLSPPW switching structure, …
The key role of nanocasting in gold-based Fe2 O3 nanocasted catalysts for oxygen activation at the metal-support interface
2019
5 Tablas.- 10 Figuras.- This is the peer reviewed version of the following article: The key role of nanocasting in gold‐based Fe2O3 nanocasted catalysts for oxygen activation at the metal‐support interface, ChemCatChem 11: 1915-1927 (2019), which has been published in final form at http://dx.doi.org/10.1002/cctc.201900210. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions.