Search results for "grain"
showing 10 items of 752 documents
Early-stage detection of surface stress corrosion cracking at the subgranular level
2014
The strain field at the interface between an alloy and its oxide layer has been mapped using nanopatterned gauges resistant to the environment of the primary nuclear medium. It was found that oxidation has decreased the alloy ductility, thereby enabling some grain boundary opening to be detectable from 1.8 % strain. It is shown that statistics of extreme rare events of hotspots quantify the occurrence of the local opening of intergranular cracks, and thereby the ageing process.
Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activate…
2004
The preparation of highly dense bulk materials with a grain size in the range of a few to a few hundreds nanometers is currently the objective of numerous studies. In our research we have achieved a measure of success in this regard by using the methods of mechanically-activated, field-activated, pressure-assisted synthesis, MAFAPAS, which has been patented, and mechanically-activated spark plasma sintering, MASPS. Both methods, which consist of the combination of a mechanical activation step followed by a consolidation step under the simultaneous influence of an electric field and mechanical pressure, have led to the formation of dense nanostructured ceramics, intermetallics, and composite…
Grain-boundary modelling of hydrogen assisted intergranular stress corrosion cracking
2018
Abstract A novel hybrid strategy for modelling intergranular hydrogen embrittlement in polycrystalline microstructures is proposed. The technique is based on a grain-boundary integral representation of the polycrystalline micro-mechanics, numerically solved by the boundary element method, coupled with an explicit finite element model of the intergranular hydrogen diffusion. The intergranular interaction between contiguous grains in the aggregate is modelled through extrinsic cohesive-frictional traction-separation laws, whose parameters depend on the concentration of intergranular hydrogen, which diffuses over the interface according to the Fick’s second law, inducing the weakening of the i…
WEAR MECHANISM OF CERAMIC TOOLS
1993
Abstract Cutting tests were performed using ceramic cutting tools under continuous cutting conditions. The tests were carried out on AISI 1040 steel, with cutting speeds ranging from 5 to 11 m s −1 . The wear mechanism was investigated for both crater and flank. Alumina-toughened zirconia of submicron grain size showed the best wear resistance. Alumina with TiC, TiN and ZrO 2 inclusions exhibited a wear resistance a little lower than the above-mentioned materials. Low chemical stability seems to be the reason for the poor performances of the silicon carbide whiskers-reinforced alumina, silicon nitride and the tungsten carbide inserts.
Spray pyrolytic deposition of ZnO thin layers composed of low dimensional nanostructures
2010
Abstract ZnO nanolayers composed of fine nanostructures have been successively grown by spray pyrolytic deposition at 300 ∘ C over amorphous glass substrates. As deposited samples were analysed by scanning electron microscopy (SEM), showing a granular morphology with grain size in the limit of the microscope resolution. CL measurement shows a broad near band edge (3.4 eV) emission of ZnO in the UV region and the defect level emissions in the green region of the spectrum. The use of intermittent spray pyrolytic deposition is shown as an alternative to increase the homogeneity of the samples when temperatures near to the precursor pyrolytic decomposition is selected, long depositions times a…
Control of grain size and morphologies of nanograined ferrites by adaptation of the synthesis route: mechanosynthesis and soft chemistry
2003
Abstract Nanocrystalline Fe-based spinels with composition Fe 2.5 Ti 0.5 O 4 can be synthesized using two different routes: soft chemistry and high-energy ball milling. This paper is focussed on the fact that each type of synthesis process can lead to powders with a crystallite size of about 15 nm but with significant differences in the grain size distribution and the agglomeration state. Whereas in the case of mechanosynthesis, the ball-milled powders consist of aggregates, those obtained by soft chemistry are very well dispersed. Moreover the chosen investigated nanopowders present a blocked/superparamagnetic transition depending on the grain size. The grain size morphologies obtained by …
Characteristics of LiFePO4 obtained through a one step continuous hydrothermal synthesis process working in supercritical water
2009
International audience; The olivine-like material LiFePO4 was prepared via a continuous hydrothermal synthesis process working from subcritical to supercritical water conditions. The influence of some processing parameters–temperature and reaction time–was investigated in terms of material purity, grain size and morphology. Supercritical conditions were found to be attractive to synthesize in one step a well-crystallized material without impurities. The primary particles size was in the nanometric range. They showed a natural tendency to form micron size agglomerates, which were supposed to be the cause of the limited capacity, as demonstrated through a cross study using laser particle size…
Nanostructured metal/oxide coatings
2007
Al based nanocomposite coatings on Cu and glass substrates were obtained in the conditions of severe shear stresses by deformation scheme similar to that of friction. Structure, composition and micromechanical properties were investigated using AFM, XRD, SIMS, electron, optical microscopy and precision microindentation techniques. Coatings are characterized by the high microhardness and good adhesion to the substrates. This is determined by the formation of nanostructured Al-oxide composite stabilized by the presence of oxidized interlayers, which are barriers for the grain growth and intermetallic phase formation. The annealing in vacuum leads to the development of oxygen redistribution pr…
Nanoindentation response analysis of Cu-rich carbon–copper composite films deposited by PVD technique
2015
Abstract The micromechanical properties of sputter deposited amorphous carbon–copper (a-C/Cu) composite films with different carbon content (6.8–19.8 at.%) were investigated. Atomic force and electron microscopy studies confirmed that the a-C/Cu films have a two-phase microstructure of amorphous sp 2 /sp 3 -bonded carbon as a composite matrix with embedded copper nanocrystallites encapsulated in a graphene shell. Load–displacement curves obtained in nanoindentation experiments followed Meyer's law with the exponent varying slightly within the interval 2.0–2.2 depending on the penetration depth and carbon content. The reverse indentation size effect was observed which was most likely the res…
Mechanical, degradation and drug-release behavior of nano-grained Fe-Ag composites for biomedical applications.
2018
Abstract An original fabrication route of high-strength bulk Fe-5Ag and Fe-10Ag nanocomposites with enhanced degradation rate is reported. Near fully dense materials with fine nanostructures and uniform distribution of Ag nanoparticles were obtained employing high energy attrition milling of Fe-Ag2O powder blends followed by cold sintering – high pressure consolidation at ambient temperature that allowed the retention of the nanoscale structure. Annealing in hydrogen flow at 550 °C resulted in enhanced ductility without coarsening the nanostructure. The strength in compression of Fe5Ag and Fe10Ag nanocomposites was several-fold higher than the values reported for similar composites with mic…