Search results for "heterogeneous"

BASE-SPECIFIC RIBONUCLEASES POTENTIALLY INVOLVED IN HETEROGENEOUS NUCLEAR-RNA PROCESSING AND POLY(A) METABOLISM

1984

Abstract Polyadenylation and splicing of heterogeneous nuclear RNA, two crucial steps in mRNA processing, are apparently enzymically mediated processes. This contribution summarizes the properties and the presumed functions of the known poly(A) catabolic enzymes (endoribonuclease IV and V, 2′,3′-exoribonuclease) as well as those of the pyrimidine-specific endoribonucleases associated with snRNP—hnRNP complexes (endoribonuclease VII, acidic p I 4.1 endoribonuclease and poly(U)-specific U1 snRNP-nuclease).

ScCO2 as polymerization medium for high value polymers: two recent cases

2007

In recent years the use of supercritical carbon dioxide (scCO2) in polymer processing and polymerization reactions has merged as a “green” alternative to replace both organic solvents, environmentally hazardous (VOCs), and water, which use involves the production of large amount of waste streams. ScCO2 is non-toxic, inexpensive, and often exhibits high solubility in polymer matrixes. Moreover, it causes polymer plasticization, thus favoring the diffusion of low MW species (monomers, initiators or additives) in the polymer phase. In this work, the use of scCO2 as polymerization medium for two different special polymers is discussed. Fluorinated copolymers mainly find application in environme…

Polyvinylpolypyrrolidone‐Stabilized Copper Nanoparticles as an Efficient and Recyclable Heterogeneous Catalyst for the Click of 1,2,3‐Triazoles in Wa…

2019

Selective propane oxidation over MoVSbO catalysts. On the preparation, characterization and catalytic behavior of M1 phase

2009

Nb-free (SbO)(2)M(20)O(56) catalysts (M = Mo, V) presenting pure M1 phase have been prepared by a post-synthesis treatment with hydrogen peroxide of a heat-treated MoVSbO mixed metal oxide catalyst previously prepared by hydrothermal method. The characterization of catalysts and their results for propane oxidation suggest that the optimization in the preparation of the M1 phase depends strongly on the washing procedure. The optimal removing of Sb species formed during post-synthesis treatment can explain the improvement in the catalytic activity; while the better selectivity to acrylic acid of the catalysts obtained by post-synthesis treatment can be explained by the elimination of M2 phase…

Electrochemical Abatement of Organic Pollutants in Water by Electro- Fenton with Natural Heterogeneous Catalysts Under Pressure

2020

In recent decades, electrochemical advanced oxidation processes (EAOPs) have proved as alternative technologies to conventional processes. Indeed, EAOPs can often allow to treat wastewater containing toxic and POPs. Among them, electro-Fenton (EF) is considered particularly promising for the treatment of recalcitrant organics, since it presents various advantages, including high abatements for many organic pollutants, simplicity of equipment and operations, relatively low cost and low consumption of chemicals. Recently, the utilization of some natural heterogeneous catalysts was proposed in order to avoid some disadvantages of the conventional EF process. In this frame, in this work EF proc…

Oxidation of CH4 over Pd supported on TiO2-doped SiO2: Effect of Ti(IV) loading and influence of SO2

2009

Titania-modified silicas with different weight% of TiO2 were prepared by sol-gel method and used as supports for Pd (1 wt%) catalysts. The obtained materials were tested in the oxidation of methane under lean conditions in absence and in presence of SO2. Test reactions were consecutively performed in order to evaluate the thermal stability and poisoning reversibility. Increasing amounts of TiO2 improved the catalytic activity, with an optimum of the performance for 10 wt% TiO2 loading. Moreover, the titaniacontaining catalysts exhibited a superior tolerance towards SO2 by either adding it to the reactants or feeding it as a pure pretreatment atmosphere at 350 8C. Catalysts were characterize…

Activity of SiO2 supported gold-palladium catalysts in CO oxidation

2003

Abstract Bimetallic Au-Pd catalysts supported on silica with different Au/Pd atomic ratios were prepared by simultaneous reduction of palladium and gold precursors by ethanol in the presence of the polymer, polyvinylpyrrolidone (PVP). Formation of alloyed particles was detected by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and CO chemisorption measurements. The catalysts were tested in the catalytic oxidation of CO using a plug–flow reactor. The CO conversion was determined as a function of temperature. The monometallic palladium and the palladium-rich catalysts behaved quite similarly and were the most active catalysts. …

Preparation, Characterization and Photocatalytic Activity of TiO2 Impregnated with the Heteropolyacid H3PW12O40: Photo-assisted Degradation of 2-prop…

2009

Abstract Both commercial and home prepared TiO2 samples impregnated with tungstophosphoric acid (H3PW12O40) were prepared and used for the photo-assisted degradation of 2-propanol in gas–solid regime. The characterization results evidenced a good coverage of the polyoxometalate (POM) onto the surface of both types of TiO2 samples along with a marginal effect of the presence of ethanol or HCl during the POM impregnation step on the specific surface area, porosity, morphology, crystallinity and acidity of the samples. Propene was the main intermediate product found in 2-propanol photocatalytic degradation by using the samples containing POM as the photocatalyst, whereas propanone was mainly o…

Combined CO/CH4 oxidation tests over Pd/Co3O4 monolitic catalyst: effects of high reaction temperature and SO2 exposure on the deactivation process

2007

Abstract CO and CH 4 combined oxidation tests were performed over a Pd (70 g/ft 3 )/Co 3 O 4 monolithic catalyst in conditions of GHSV = 100,000 h −1 and feed composition close to that of emission from bi-fuel vehicles. The effect of SO 2 (5 ppm) on CO and CH 4 oxidation activity under lean condition ( λ  = 2) was investigated. The presence of sulphur strongly deactivated the catalyst towards methane oxidation, while the poisoning effect was less drastic in the oxidation of CO. Saturation of the Pd/Co 3 O 4 catalytic sites via chemisorbed SO 3 and/or sulphates occurred upon exposure to SO 2 . A treatment of regeneration to remove sulphate species was attempted by performing a heating/coolin…

CoMo catalysts supported on aluminosilicates: synergy between support and sodium effects

2004

Abstract The structural properties and the hydrodesulfurization (HDS) activity of sodium doped and sodium free CoMo catalysts supported on amorphous aluminosilicates (ASA) were investigated as a function of different SiO2:Al2O3 ratios. The support yielding the most active catalyst, (66% alumina) doped with different amounts of sodium, was used for a series of similar catalysts in order to study the effect of the alkali ion on the catalytic performance. The supports were prepared by sol–gel method and the catalysts were prepared by incipient wet impregnation method. The structure and the surface of the various samples were investigated by X-ray diffraction (XRD), temperature-programmed reduc…