Search results for "humid"
showing 10 items of 334 documents
Evaluation of the MOZAIC Capacitive Hygrometer during the airborne field study CIRRUS-III
2018
The MOZAIC Capacitive Hygrometer (MCH) is usually operated aboard passenger aircraft in the framework of MOZAIC (Measurement of Ozone by Airbus In-Service Aircraft) for measuring atmospheric relative humidity (RH). In order to evaluate the performance of the MCH, the instrument was operated aboard a Learjet 35A research aircraft as part of the CIRRUS-III field study together with a closed-cell Lyman-α fluorescence hygrometer (Fast in situ Stratospheric Hygrometer, or FISH) and an open-path tunable diode laser system (Open-path Jülich Stratospheric TDL ExpeRiment, or OJSTER) for water vapour measurement. After reducing the CIRRUS-III data set to data corresponding to MOZAIC aircraft operatio…
Summertime columnar content of atmospheric water vapor from ground-based Sun-sky radiometer measurements through a new in situ procedure
2010
[1] A new in situ technique for the retrieval of atmospheric water vapor content (i.e., precipitable water content) from Sun photometric direct solar irradiance measurements, taken at the 940 nm wavelength during clear‐sky conditions, is presented. The procedure is applied to summer data recorded in 2007, 2008, and 2009 with a Sun‐sky radiometer at the San Pietro Capofiume station in the Po valley, Italy. It is a preliminary development of the retrieval procedure providing the columnar water vapor content from measurements performed with PREDE Sun‐sky radiometers. The technique brings improvement and innovation by retrieving the best values of constants (a and b), characterizing atmospheric…
Ice nucleation properties of the most abundant mineral dust phases
2008
[1] The ice nucleation properties of the nine most abundant minerals occurring in desert aerosols (quartz, albite, microcline, kaolinite, montmorillonite, illite, calcite, gypsum, and hematite) were investigated by environmental scanning electron microscopy (ESEM). In this instrument, the pure minerals are exposed to water vapor at variable pressures and temperatures. The crystallization of ice on the mineral particles is observed by secondary electron imaging, and the supersaturation for an activated particle fraction of 1–3% is determined as function of temperature. In all experiments, condensation of water prior to ice formation was not observed within detectable limits, even at water su…
Irreversible loss of ice nucleation active sites in mineral dust particles caused by sulphuric acid condensation
2010
Abstract. During the FROST-2 (FReezing Of duST) measurement campaign conducted at the Leipzig Aerosol Cloud Interaction Simulator (LACIS), we investigated changes in the ice nucleation properties of 300 nm Arizona Test Dust mineral particles following thermochemical processing by varying amounts and combinations of exposure to sulphuric acid vapour, ammonia gas, water vapour, and heat. The processed particles' heterogeneous ice nucleation properties were determined in both the water subsaturated and supersaturated humidity regimes at −30 °C and −25 °C using Colorado State University's continuous flow diffusion chamber. The amount of sulphuric acid coating material was estimated by an aeroso…
Northward bursts of the West African monsoon leading to rainfall over the Hoggar Massif, Algeria
2009
The Hoggar Massif is a comparatively populated region in the Sahara, where water supply is a critical problem due to the lack of nearby sources and unaffordable water pumping. In the present paper, we analyse the influence of the West African monsoon (WAM) on precipitation over the Hoggar during summer. We investigate (1) two rainfall events during 23-27 July 2006, accounting for almost half of the precipitation of this year, and (2) the representativity of this period with regard to ERA-40 ECMWF re-analyses (1979 to 2001). By the end of July 2006, two consecutive northward bursts of the WAM flow reached the Hoggar and caused an increase in low-level humidity. In the afternoon of these days…
The primary volcanic aerosol emission from Mt Etna: Size-resolved particles with SO2 and role in plume reactive halogen chemistry
2018
International audience; Volcanoes are an important source of aerosols to the troposphere. Within minutes after emission, volcanic plume aerosol catalyses conversion of co-emitted HBr, HCl into highly reactive halogens (e.g. BrO, OClO) through chemical cycles that cause substantial ozone depletion in the dispersing downwind plume.This study quantifies the sub-to-supramicron primary volcanic aerosol emission (0.2-5 μm diameter) and its role in this process. An in-situ ground-based study at Mt Etna (Italy) during passive degassing co-deployed an optical particle counter and Multi-Gas SO2 sensors at high time resolution (0.1 Hz) enabling to characterize the aerosol number, size-distribution and…
Investigation by raman spectroscopy of the decomposition process of HKUST-1 upon exposure to air
2016
We report an experimental investigation by Raman spectroscopy of the decomposition process of Metal-Organic Framework (MOF) HKUST-1 upon exposure to air moisture (T=300 K, 70% relative humidity). The data collected here are compared with the indications obtained from a model of the process of decomposition of this material proposed in literature. In agreement with that model, the reported Raman measurements indicate that for exposure times longer than 20 days relevant irreversible processes take place, which are related to the occurrence of the hydrolysis of Cu-O bonds. These processes induce small but detectable variations of the peak positions and intensities of the main Raman bands of th…
Application of A Precision Apiculture System to Monitor Honey Daily Production †
2020
Precision beekeeping or precision apiculture is an apiary management strategy based on the monitoring of individual bee colonies to minimize resource consumption and maximize the productivity of bees. Bees play a fundamental role in ensuring pollination
Reactivity of gypsum faces according to the relative humidity by scanning force microscopy
1997
Abstract This article reports the experimental observation of the stability of the different faces of calcium sulphate dihydrate (gypsum CaSO 4 .2H 2 O) according to the relative humidity. Scanning Force Microscopy experiments were carried out with a view to discerning the topography of the surfaces, the chemical compositional domains, and in an attempt to evaluate the friction and viscoelastic properties of the surface. Our results indicate that the (010) face of gypsum is hydrophilic and very reactive contrary to the less hydrophilic (120) and (101) faces which remain stable depending on the relative humidity. It is clear from our results that a precipitation like process can be induced b…
A chamber to test the response of radon detectors to changing environmental conditions.
2011
Radon risk assessment is carried out with accurate measurements with active or passive instrumentation. All radon detectors must be calibrated and tested using a radon chamber containing a known concentration of radon produced by specific sources of 226Ra. Some of the chambers can also be used to test the response of detectors as a function of environmental conditions. In this case, it can be inferred a calibration curve with respect to changing of the parameter considered. For this aim, a new chamber radon was designed and realized to perform both calibration of instruments and to study the detector response in a large range of variation of the environmental parameters (pressure, 700 - 110…