Search results for "idraulica"
showing 10 items of 1075 documents
Testing the shape-similarity hypothesis between partide-size distribution and water retention for sicilian soils
2012
Application of the Arya and Paris (AP) model to estimate the soil water retention curve requires a detailed description of the particlesize distribution (PSD) but limited experimental PSD data are generally determined by the conventional sieve-hydrometer (SH) method. Detailed PSDs can be obtained by fitting a continuous model to SH data or performing measurements by the laser diffraction (LD) method. The AP model was applied to 40 Sicilian soils for which the PSD was measured by both the SH and LD methods. The scale factor was set equal to 1.38 (procedure AP1) or estimated by a logistical model with parameters gathered from literature (procedure AP2). For both SH and LD data, procedure AP2 …
Assessing the suitability of American National Aeronautics and Space Administration (NASA) agro-climatology archive to predict daily meteorological v…
2017
Abstract For decades, the importance of evapotranspiration processes has been recognized in many disciplines, including hydrologic and drainage studies, irrigation systems design and management. In this research, the suitability of the Prediction Of Worldwide Energy Resource database published by the American National Aeronautics and Space Administration (POWER-NASA), to estimate daily meteorological variables and ET 0 was assessed in Sicily, Italy, for the period 2006–2014, based on ground data measured by a network of climate stations belonging to the regional Agro-meteorological Information Service (SIAS). After comparing the climate data (minimum, T min , maximum, T max , and average, T…
Using HYDRUS-2D model to assess the optimal drip lateral depth for eggplant crop in a sandy loam soil of central Tunisia
2016
The main objective of the work is to assess the optimal drip lateral depth for Eggplant crop (Solanum melongena L.) irrigated with a drip system in a sandy loam soil by means of field measurements and simulation models. Initially, the performance of Hydrus-2D was assessed based on the comparison between simulated soil water contents (SWC) and the corresponding measured in two plots, in which laterals with co-extruded emitters were laid on the soil surface (drip irrigation, DI-0) and at 20 cm depth (subsurface drip irrigation, SDI-20), respectively. In order to identify the optimal position of the lateral, the results of different scenarios, obtained by changing the installation depth of the…
Spatial diversity of chlorine residual in a drinking water distribution system: application of an integrated fuzzy logic technique
2014
A reduction in the concentration of chlorine, which is used as a chemical disinfectant for water in drinking water distribution systems, can be considered to be an index of the progressive deterioration of water quality. In this work, attention is given to the spatial distribution of the residual chlorine in drinking water distribution systems. The criterion for grouping the water-quality parameters normally used is highly subjective and often based on data that are not correctly identified. In this paper, a cluster analysis based on fuzzy logic is applied. The advantage of the proposed procedure is that it allows a user to identify (in an automatic way and without any specific assumption) …
Testing a Simplified Approach to Determine Field Saturated Soil Hydraulic Conductivity
2013
Abstract Interpreting and simulating hydrological processes need a large number of field saturated soil hydraulic conductivity, Kfs , data that should be collected with simple and rapid field experiments. A Simplified method based on a Beerkan Infiltration run (SBI method) was recently developed and tested successfully on Burundian soils. With the SBI method, a cylinder is inserted to a short depth into the soil and the infiltration time of a few small volumes of water repeatedly applied at the surface of the confined soil is measured. Calculating Kfs needs the slope of the linearized cumulative infiltration vs. time relationship and an estimate of the so called α* parameter. In this invest…
Predicting soil loss in central and south Italy with a single USLE-MM model
2018
Purpose: The USLE-MM estimates event normalized plot soil loss, Ae,N, by an erosivity term given by the runoff coefficient, QR, times the single-storm erosion index, EI30, raised to an exponent b1> 1. This modeling scheme is based on an expected power relationship, with an exponent greater than one, between event sediment concentration, Ce, and the EI30/Pe(Pe= rainfall depth) term. In this investigation, carried out at the three experimental sites of Bagnara, Masse, and Sparacia, in Italy; the soundness of the USLE-MM scheme was tested. Materials and methods: A total of 1192 (Ae,N, QREI30) data pairs were used to parameterize the model both locally and considering all sites simultaneously. …
Application of a 1-D numerical model to estimate the sediment transported along a river
2006
Natural rivers tend to adjust their plane shape and longitudinal profile in order to assume a configuration compatible with the changing hydraulic and man-made constraints. The causes of these bed variations are related to changes in independent river channel variables (increase in water discharge, decrease in sediment discharge, etc..) or to changes in river slope. River bed degradation and aggradation, often occurring as result of river morphological changes, modify the longitudinal bed profile of the river and the amount of sediment transported along the river until to reach the outlet. As an example, the construction of river dams produces large morphological consequences: when the stre…
Overland flow hydrodynamic characteristics in rough beds at low Reynolds numbers
2022
This paper considers overland flow resistance at low Reynolds numbers through analysis of experimental runs carried out using water only and water/glycerol mixtures. We first examined the power relationship between the Darcy–Weisbach friction factor f and the Reynolds number Re to obtain the values of the K coefficient and b exponent. These results confirmed the applicability of the values of b suggested in literature, while K required a specific calibration for laminar open-channel flows. The analysis revealed that transition from a laminar to turbulent flow regime for water only flows occurred at a threshold value of Re equal to 500 as described historically. The estimate of f by the powe…
Effect of a Heavy Rainstorm on the Surface Hydrodynamic Properties of a Sandy-Loam Soil
2022
Changes in surface-soil hydrodynamic properties associated with torrential natural rainstorms are largely unknown. This investigation aimed at verifying if the surface hydrodynamic properties of a sandy-loam soil varied due to the heavy rainfall event (130 mm in nearly three hours) that occurred in the summer of 2020 at Palermo (Italy) and also to establish if soil recovery processes occurred soon after the event. The soil of an orchard was sampled immediately before the rainstorm and a few days and 1.5 months later. The rainstorm determined a moderate decrease (by 1.8 times) of the saturated soil hydraulic conductivity, Ks, and an increase of its relative variability. In the subsequent wee…
A test of water pouring height and run intermittence effects on single-ring infiltration rates
2018
Assessing how the infiltration process depends on the water impact energy improves interpretation of hydrological processes. Impact energies vary with the height of water pouring; that is, the distance between the water delivery point and the soil surface. The effects of the height of water pouring on infiltration in an initially near saturated soil can be tested in the field by two repeated Beerkan infiltration runs separated by a short pause (30 min) and using both low (non-perturbing) and high (perturbing) heights of water application. The double two-stage Beerkan run methodology was applied in two soils. The infiltration rate at the end of the perturbing stage of the experiment was 0.2–…