Search results for "init"
showing 10 items of 6629 documents
Stilbenoid phosphors with increased electron affinity: sulfones as electron accepting groups
2001
Stilbenoid compounds are one of the preferred classes of luminescent materials for the use in light emitting diodes (LEDs). A problem connected with the use of poly(phenylenevinylene) (PPV) in LEDs is the unbalanced charge carrier transport, electron injection from aluminium and electron transport properties are only poor. The substitution with electron accepting groups like nitriles is a suitable way to lower the LUMO level of the chromophore. The electron withdrawing strength of sulfones is comparable to cyanides and the second binding site is useful to attach solubilising side chains. A two-step synthesis of model compounds and polymers from ethene and sulfonyl dibromobenzene and bromo a…
Surfactant Assisted Polymerization of Tetrafluoroethylene in Supercritical Carbon Dioxide with a Pilot Scale Batch Reactor.
2008
Chain-free radical polymerization of tetrafluoroethylene (TFE) was carried out in supercritical carbon dioxide (scCO2), at 50 °C and 121–133 bar, with tertiary-amyl-per-pivalate as a free radical initiator, using a 5-L pilot scale batch reactor. Experiments were carried out both in the absence and in the presence of perfluoropolyether (PFPE) carboxylate surfactants. Stabilizers were employed under the free acid form and as sodium and calcium salts. An expanded fibrillated poly(TFE) was obtained in all experiments. In the case of surfactant-free polymerizations, the product was mainly constituted by irregular shape macroparticles having size in the range 200–500 μm. Quite interestingly, when…
Sustainable nanocomposites based on halloysite nanotubes and pectin/polyethylene glycol blend
2013
Abstract This study was focused on the preparation and characterization of biofilms based on pectin/polyethylene glycol 20000 (PEG) blend and halloysite nanotubes (HNTs). The obtained blends loaded with a natural nanoclay are proposed as sustainable alternative to the polymers produced from non-renewable resources such as fossil fuels. Properties of technological interest have been monitored and they were correlated to the structural features of the nanocomposites. It turned out that the wettability of the films can be tuned by changing the composition and the distribution of HNTs into the material as well as the surface roughness. The tensile properties of the blend are enhanced by the pre…
Effect of climate and vegetation on soil organic carbon, humus fractions, allophanes, imogolite, kaolinite, and oxyhydroxides in volcanic soils of Et…
2007
A soil sequence along an elevational gradient ranging from subtropical to subalpine climate zones in the Etna region (Sicily, southern Italy) was investigated with respect to organic C, kaolinite, and crystalline to noncrystalline Al and Fe phases. Special emphasis was given to the stabilization of soil organic carbon (SOC) and its interaction with the inorganic phases. The soils were variations of Vitric Andosols that developed on a trachy-basaltic lava flow with an age of 15,000 years. Two main vegetation systems dominated the sites: at the lower sites, it was mainly maquis vegetation and, at the higher elevated sites, predominantly coniferous forest. The concentration of SOC in the topso…
Studies on electron-beam irradiation and plastic deformation of medical-grade ultra-high molecular weight polyethylene
2011
Abstract Separated and combined electron-beam irradiation and plastic deformation effects on the structures of ultra-high molecular weight polyethylene (UHMWPE) were studied. It was found that the concentration of carbonyl (ketones, esters and peresters), hydroxyl and vinyl groups increases with the growing dose of adsorbed electrons. It also tends to exhibit a slight increase in the melting point and crystallinity of the samples. A mechanical stress in the polymer was found to accelerate radiation-induced degradation. It was concluded that each of the factors studied (i.e. electron beam sterilization and plastic deformation) had a different impact on the polymer structure. The change in th…
Experimental organic matter maturation at 2kbar: Heat-up effect to low temperatures on vitrinite reflectance
2012
Abstract An experimental study was performed to evaluate the effect of heat-up to various low temperatures on vitrinite reflectance ( VR ) at 2 kbar employing the same previously used heat-up procedures, starting material and apparatus. Heat-up is the isobaric experimental procedure consisting of the increase in temperature of the laboratory vitrinite maturation from room temperature to the desired run temperature T end of heat-up at which the isobaric-isothermal maturation starts. Experiments employed cold-seal pressure vessels with classical heat-up devices and were carried out on wet (water added) xylite of swamp cypress. Confined system maturation experiments were conducted at 2 kbar an…
The influence of weathering processes on labile and stable organic matter in Mediterranean volcanic soils
2008
The relationship and mechanisms among weathering processes, cation fluxes, clay mineralogy, organic matter composition and stability were studied in soils developing on basaltic material in southern Italy (Sicily). The soils were transitions between Phaeozems and Vertisols. Intense losses of the elements Na, Ca and Mg were measured indicating that weathering has occurred over a long period of time. The main weathering processes followed the sequence: amphibole, mica, volcanic glass or if ash was the primary source→smectite→interstratified smectite–kaolinite→kaolinite. Kaolinite formation was strongly related to high Al, Mg and Na losses. The good correlation between oxyhydroxides and kaolin…
Influence of“controlled processing conditions” on the solidification of iPP, PET and PA6
2002
In this work reliable experimental data for three semicrystalline polymers (iPP, PA6, PET) crystallised under pressure and high cooling rates are supplied. These results were achieved on the basis of a model experiment where drastic controlled solidification conditions are applied. The final objective was to quantify the effect of two typical operating conditions (pressure and cooling rate) on the final properties and morphology of the obtained product. The influence of processing conditions on some macroscopically relevant properties, such as density and micro hardness is stressed, together with the influence of processing conditions on the product morphology, investigated by means of Wide…
The use of the indentation test for studying the solidification behaviour of different semicrystalline polymers during injection moulding
2005
Summary: An in-line method for monitoring the solid-ificationprocess during injection molding of semicrystallinepolymers (demonstrated previously in J. Appl. Polym. Sci.2003, 89, 3713) is based on a simple device, where anadditional ejector pin is pushed on the injection molded partatdifferenttimesduringthesolidificationphase.The‘inden-tation depth profile’, i.e., residual deformation as a functionoftime,wasobtainedandallowedtodeterminetheevolutionof the solidification front in the mold as a function of thecooling time. The present work shows the reliability andthe powerfulness of the aforementioned method for a largevariety of different semicrystalline polymers (PET, PBT,polyamide-6 PA6, isota…
Viscoelastic recovery behavior following Atomic Force Microscope nanoindentation of semi-crystalline poly(ethylene)
2007
The residual imprint left behind by the AFM nanoindentation of polymers has been seldom studied in the past. In this work, the evolution of indentations at room temperature performed on a semicrystalline poly- (ethylene) in a broad range of experimental conditions is presented. The study shows that the recovery after 24 h is substantial, although not complete. Moreover, the dynamics of the recovery process is not seen to depend on the magnitude of the applied load for the nanoindentation, but instead on the rate of the indentation used. This points out that viscoelastic processes are minimized when performing fast nanoindentations, while at low loading rates there seems to be a residual vis…