Search results for "layer"

Photoelectrocatalysis of paracetamol on Pd–ZnO/ N-doped carbon nanofibers electrode

2021

Abstract The presence of pharmaceuticals in water bodies has become a major concern in recent years. An efficient and innovative way of eliminating these pollutants is through photoelectrocatalytic (PEC) degradation owing to its environmental sustainability and its ability to remove recalcitrant pollutants. In this study, palladium loaded zinc oxide/carbon nanofibers (CZnO–Pd) were employed as a novel photoanode for PEC degradation of paracetamol. The CZnO–Pd composite was prepared through electrospinning and atomic layer deposition (ALD). The obtained materials were characterized. Photoelectrochemical studies were carried out with linear sweep voltammetry and chronoamperometry. The removal…

Initial Surface Film on Magnesium Metal. A Characterization by X-ray Photoelectron Spectroscopy (XPS) and Photocurrent Spectroscopy (PCS)

2007

Abstract A detailed investigation of the initial film grown on mechanically polished Mg electrodes has been carried out by ex situ X-ray Photoelectron Spectroscopy (XPS) and in situ Photocurrent Spectroscopy (PCS), allowing to reach a detailed picture of the passive layer structure. The XPS data show that the films formed soon after mechanical treatment and immersion in aqueous electrolyte have a bilayer structure, consisting of an ultra-thin MgO inner layer (∼2.5 nm) and a Mg(OH) 2 external layer. The thickness of the Mg(OH) 2 layer is a function of immersion time and solution temperature. After mechanical treatment and immersion in aqueous solution at room temperature, the MgO/Mg(OH) 2 la…

The influence of surface treatment on the anodizing of magnesium in alkaline solution

2011

Abstract The mechanism of magnesium anodizing after mechanical polishing or HF pickling was studied. X-ray Photoelectron Spectroscopy and Photocurrent Spectroscopy were employed to characterize both the initial films formed on Mg soon after surface treatments and the anodic films grown in strongly alkaline solutions. Electrochemical and capacitance measurements were performed in order to study the oxidation process and to check if the kinetic of growth fits the Mott–Cabrera high field model. From Tafel plots it was possible to estimate the activation distance, while the simulation of the barrier layer growth as a function of the potential at high scan rate allowed to estimate the other kine…

In situ characterization of passive films on al-ti alloy by photocurrent and impedance spectroscopy

1998

Abstract The anodic behaviour of an Al-Ti alloy (Ti-48Al-1V, atomic %) was investigated in different aqueous electrolytes. In all cases the alloy was passive owing to the growth of a barrier-like oxide film according to the high field mechanism. The study of the growth curves suggests partial dissolution of the film during the formation process in acidic solution. The kinetic parameters for film formation have been estimated in neutral solutions and the dielectric constant of the passive layer was roughly estimated. The in-situ characterization of the passive film revealed a n-type behaviour only for very low thicknesses, whilst thicker films showed insulator-like characteristics. The analy…

Study of passive films on stainless steels by photocurrent measurements

1990

Abstract Passive films formed on three different stainless steels have been studied by means of photocurrent spectroscopy. Differences in the photoelectrochemical behaviour have been attributed to the influence of the nickel content of the alloys and to the formation of different oxide phases.

A photocurrent spectroscopic investigation of passive films on chromium

1990

Abstract Photoelectrochemical experiments have been carried out in order to identify the passive layers grown on chromium metal in different conditions. Changes in the values of the band gap of the films have been related to changes of composition, due to the different water content of the films.

Physicochemical Characterization of Passive Films and Corrosion Layers by Differential Admittance and Photocurrent Spectroscopy

2009

Two different electrochemical techniques, differential admittance and photocurrent spectroscopy, for the characterization of electronic and solid state properties of passive films and corrosion layers are described and critically evaluated. In order to get information on the electronic properties of passive film and corrosion layers as well as the necessary information to locate the characteristic energy levels of the passive film/electrolyte junction like: flat band potential (Ufb), conduction band edge (EC) or valence band edge (EV), a wide use of Mott-Schottky plots is usually reported in corrosion science and passivity studies. It has been shown, in several papers, that the use of simpl…

Low-Temperature Atomic Layer Deposition of Crystalline and Photoactive Ultrathin Hematite Films for Solar Water Splitting

2015

We developed a low-temperature atomic layer deposition route to deposit phase pure and crystalline hematite (alpha-Fe2O3) films at 230 degrees C without the need for postannealing. Homogenous and conformal deposition with good aspect ratio coverage was demonstrated on a nanostructured substrate and analyzed by transmission electron microscopy. These as-deposited alpha-Fe2O3 films were investigated as photoanodes for photoelectrochemical water oxidation and found to be highly photoactive. Combined with a TiO2 underlayer and a low-cost Ni(OH)(2) catalyst, hematite films of less than 10 nm in thickness reached photocurrent densities of 0.3 mA cm(-2) at 1.23 V vs RHE and a photocurrent onset po…

Photoelectrochemical Techniques in Corrosion Studies

2005

Chemical surface ageing in ambient conditions of an Al–Fe–Cr approximant phase.

2007

International audience; The γ -Al65Cr27Fe8 phase is a complex metallic alloy with interesting electrochemical properties. Here we present a detailed study of the surface ageing of this alloy when exposed to ambient conditions for a long time. A combination of x-ray reflectivity, photoemission spectroscopy and secondary neutral mass spectroscopy measurements is used to provide a model of the modification of the surface structure and its composition as functions of ageing time. The near surface structure is described by the stacking of three layers. The first layer on top of the substrate corresponds to a mixed metal oxide and is amorphous. The intermediate layer consists of pure aluminum oxy…